Advertisement

Characterization of the Noise at the Receiver

  • Joachim SpeidelEmail author
Chapter
Part of the Signals and Communication Technology book series (SCT)

Abstract

Before we are going to discuss various detection algorithms for the receiver output signal q(k), we have to characterize the noise \(n_{C}(t)\) in Fig.  1.1. The main sources of noise are the resistors and the electronic components such as transistors or the photodiode in an optical receiver. In a wireless system, the receive antenna collects noise coming from the channel. In most cases, the first stage of a receiver is composed of an amplifier associated with a bandpass filter to limit the noise spectrum to the passband of the transmit signal, which is given by the channel transfer function in ( 1.19). The resulting real-valued noise \(n_{C}(t)\) is demodulated and lowpass filtered with \(\sqrt{2}G_{R}(f)\) yielding the complex-valued noise \(n_{R}(t)\) with a lowpass spectrum. The noise sequence n(k) results after sampling and is depicted in the discrete-time equivalent baseband system in Fig.  1.5b. In the following, we analyze the noise at the receiver step by step. For the basics on stochastic processes we refer to the Appendix A

Copyright information

© Springer Nature Switzerland AG 2019

Authors and Affiliations

  1. 1.Institute of TelecommunicationsUniversity of StuttgartStuttgart, Baden-WurttembergGermany

Personalised recommendations