Transportation of lignocellulosic biomass feedstock is an important task within a biomass-based energy provision system. The distributed availability of low-density feedstock makes this operation highly challenging. The proposed aim to replace a large percentage of fossil fuels with renewable lignocellulosic bioenergy sources by the year 2030 [1, 2] will require adaptation and possibly renovation of the existing transportation infrastructure. The complexity of the biomass provision system will be further increased as compared to the current system since the biomass feedstock portfolio will consist of a range of energy crops, grown in various locations with unique climates and transportation infrastructures.
Ideally, biomass would be preprocessed into a gravity-flowable particulate bulk form that allows utilization of and expanding upon the existing transportation infrastructure of agricultural bulk products such as corn and soybean. Such a form would require size reduction of feedstock, which is energetically expensive, followed by compression. To optimize long-distance transport, the bulk density of this feedstock would ideally be as high as that of coal in railcars. This would require very high “in-mold” particulate densities of the feedstock generated by machines with very high throughput. Even if this goal could be achieved, it is currently not clear what the effect of such a highly densified material form on the conversion efficiency would be.
Finally, apart from technical challenges in producing the ideal form of biomass from a provision and conversion perspective, there is a huge challenge in the mere scale of the proposition: If the goal set by the US government of replacing 30 % of current fossil fuels by 2030 is to be reached, the annual transported volume of biomass would be three times that of the 2011 US corn yield.
This chapter reviews the literature on research that addresses biomass feedstock provision including transportation and identifies challenges that must be addressed in the near future.
KeywordsSugar Cane Corn Stover Biomass Feedstock Specific Energy Consumption Rail Transport
- 1.Perlack R, Wright L, Turhollow A, Graham R, Stokes B, Erbach D (2005) Biomass as feedstock for a bioenergy and bioproducts industry: the technical feasibility of a billion-ton annual supply. U.S. Department of Energy Oak Ridge National Laboratory, Oak Ridge, TN. p: 1–78Google Scholar
- 2.U.S. Department of Energy Biomass Program (2012) Feedstock supply and logistics: biomass as a commodity. DOE/EE-0766. Available at: https://www1.eere.energy.gov/bioenergy/pdfs/feedstocks_four_pager.pdf (verified on Dec. 13, 2013)
- 3.Humbird D, Davis R, Tao L, Kinchin C, Hsu D, Aden A, Schoen P, Lukas J, Olthof B, Worley M, Sexton D, Dudgeon D (2011) Process design and economics for biochemical conversion of lignocellulosic biomass to ethanol: dilute-acid pretreatment and enzymatic hydrolysis of corn stover. U.S. Department of Energy National Renewable Energy Laboratory, Golden, CO. p: 1–114Google Scholar
- 5.U.S. Department of Energy (2011) U.S. Billion-ton update: biomass supply for a bioenergy and bioproducts industry. U.S. Department of Energy Oak Ridge National Laboratory, Oak Ridge, TN. p: 1–227Google Scholar
- 6.Hess J, Kenney K, Ovard L, Searcy E, Wright C (2009) Commodity-scale production of an infrastructure-compatible bulk solid from herbaceous lignocellulosic biomass. Idaho National Laboratory, Idaho Falls, IDGoogle Scholar
- 12.Smith J, Grisso R, VonBargen K, Anderson B (1988) Management tips for round bale hay harvesting, moving, and storage. http://digitalcommons.unl.edu/cgi/viewcontent.cgi?article=2306&context=extensionhist. Accessed 28 June 2013
- 15.Shinners K, Boettcher G, Hoffman D, Munk J, Muck R, Weimer P (2009) Single-pass harvest of corn grain and stover: performance of three harvester configurations. Trans ASABE 52(1):51–60Google Scholar
- 16.El Bassam N, Huisman W (2001) Harvesting and storage of Miscanthus. In: Walsh M, Jones M (eds) Miscanthus for energy and fibre. James & James, London, pp 86–108Google Scholar
- 27.Jannasch R, Quan Y, Samson R (2001) Final report: a process and energy analysis of pelletizing switch grass. Resource Efficient Agricultural Production (REAP), Ste. Anne de Bellevue, QCGoogle Scholar
- 34.Freightcar America Inc. (2012) http://www.johnstownamerica.com/Coke-Coal-Railcars.htm. Accessed 14 Aug 2012
- 39.International ICF (2009) Comparative evaluation of rail and truck fuel efficiency on competitive corridors. U.S. Department of Transportation, Federal Railroad Administration, Washington, DCGoogle Scholar
- 47.Lyne P (2010) The latest in transport management and technologies. SAIAE News Lett 3–5Google Scholar
- 48.Sustainability Program, Office of Research and Development, U.S. Environmental Protection Agency (2007) Biomass conversion: emerging technologies, feedstock, and products. EPA/600/R-07/144Google Scholar