Electroacoustical Reference Data pp 136-137 | Cite as
Dividing Networks: 12 dB Per Octave Slopes
Chapter
Abstract
The data given in Figure 67 are based on the following equations:
In these equations, Xc and XL represent the nominal impedances of the transducer loads at the chosen crossover frequency. Normally, these values will be 4 or 8 ohms. The crossover frequency is represented by f, and C and L are the calculated values of capacitance and inductance.
$$ C = {{{0.707}} \left/ {{\left( {2\pi f{X_c}} \right)}} \right.} $$
(67.1)
$$ L = {{{1.414{X_l}}} \left/ {{2\pi f}} \right.} $$
(67.2)
Keywords
Dynamical System Electrical Engineer Network Topology Reference Data Bold Line
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.
Copyright information
© Springer Science+Business Media New York 1994