Advertisement

Background

  • Ming Rao
  • Qijun Xia
  • Yiqun Ying
Part of the Advances in Industrial Control book series (AIC)

Abstract

It is expected that most readers will have some knowledge of the paper-making process and its control systems. However, for those who do not, this chapter is offered as a very brief introduction to the process operation and its control systems, to provide a necessary background about the modeling and control techniques described in this book.

Keywords

Basis Weight Manipulate Variable Paper Machine Intelligent Control System Cross Machine Direction 
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

References

  1. Alsholm O., Schoeffler J.D. and Sullivan P.R. An on-line mathematical model of a fine paper machine. Presented at the ISA 20th Ann. Conf., 1965Google Scholar
  2. Åström K.J. Control problems in paper making. Presented at the IBM Scientific Computing Symp., NY., 1964Google Scholar
  3. Box G.E.P. and Jenkins G.M. Further contributions to adaptive quality control: simultaneous estimation of dynamics - non-zero costs. Dept. of Statistics, University of Wisconsin, Madison, Tech. report, 1963Google Scholar
  4. Brewster D.B. Economic gains from improved quality control. Presented at TAPPI Annual Meeting, 1969Google Scholar
  5. Brewster Donald B. and Bjerring Andrew K. Computer control in pulp and paper 1961–1969. Proc of the IEEE, 1970; 58: 49–69CrossRefGoogle Scholar
  6. Buhr R.J.A., A practical optimal control design procedure applied to Rolland’s number 8 paper machine. Presented at the ISA/CPPA Symp. on Pulp and Paper Process Control, Vancouver, Canada, 1969Google Scholar
  7. Dalin E.B., Integrated control of fourdrinier machine. Presented at the 2nd International Symp. on Water Removal at the presses and Dryers, Mont Gabriel, Quebec, Canada, 1968Google Scholar
  8. Elnaggar A., Dumont G.A and Elshafei A.L., Adaptive control with direct delay estimation. Proc of Control Systems’ 92, Whistler, B.C. Canada, 1992, pp 13–17Google Scholar
  9. Halouskova A., Karny M. and Nagy I., Adaptive cross-direction control of paper basis weight. Proc of the 11th triennial world congress of the IFAC, Tallinn, USSR, 1991, pp 199–204Google Scholar
  10. Holm R.A., Dynamics of the drying process. Presented at the BPBMA 4th fundamental Res. Symp., Oxford, England, 1969Google Scholar
  11. McGill R., Measurement and Control in Papermaking. Adam Hilger Ltd., 1980Google Scholar
  12. Nader A.D. Dual model reference adaptive control on paper machine headboxes. Proc of 4th IFAC PRP Conf. Ghent, Belgium, 1980, pp 239–249Google Scholar
  13. Nader A.D., Lebeau B., Gauthier J.P., Foulard C. and Ramaz A. New developments in multivariable control of paper machine headboxes. Presented at Int. Symp. on Paper Machine Headboxes, Montreal, Canada, 1979Google Scholar
  14. Rao M. and Xia Q. Integrated distributed intelligent system for on-line monitoring and control of pulp processes. Canadian Journal of Artificial Intelligence 1994; Winter Issue:5–10Google Scholar
  15. Rao M. and Ying Y. Intelligent engineering approach to pulp and paper process control. Proc of 77th CPPA Annual Meeting, Montreal, Canada, 1991, pp A195–A199Google Scholar
  16. Rounsley R.R. Predictive control applied to a dryer section. Presented at 2nd International Symp. on Water Removal at the Presses and Dryers, Montreal, Canada, 1968Google Scholar
  17. Schoeffler J.D. and Sullivan P.R. A model of sheet formation and drainage on a fourdrinier. Presented at the TAPPI Engrg. Conf., 1965Google Scholar
  18. Xia Q. and Rao M. Fault-tolerant control of paper machine headboxes. J Proc. Contr. 1992; 2: 171–178CrossRefGoogle Scholar
  19. Xia Q., Rao M., Shen X. and Zhu H. Adaptive control of a paperboard machine. Pulp and Paper Canada 1994; (in press)Google Scholar
  20. Xia Q., Rao M., Shen X., Ying Y. and Zurcher J. Systematic modeling and decoupling control of a pressurized heradbox. Proc. 1993 Canadian Conf. on Electrical and Computer Engineering, Vancouver, 1993, pp 962-965Google Scholar

Copyright information

© Springer-Verlag London Limited 1994

Authors and Affiliations

  • Ming Rao
    • 1
  • Qijun Xia
    • 1
  • Yiqun Ying
    • 1
  1. 1.Department of Chemical EngineeringUniversity of AlbertaEdmontonCanada

Personalised recommendations