Advertisement

Technology of Mixed Adhesive Joints

  • Lucas F. M. da Silva
Chapter
Part of the Advanced Structured Materials book series (STRUCTMAT, volume 6)

Abstract

The technique of mixed adhesive joints has been originally proposed more than 40 years ago. However, its practical implementation is still very limited. Aspects associated with the automotive, aeronautical and aerospace industries that could benefit from this technique are described. There are basically two types of problems that the mixed-adhesive technique can solve. The first is related to improvements of joint strength in relation to joints with stiff and brittle adhesives. The second is to extend the temperature range of adhesive joints. Results that illustrate the potentiality of this technique in terms of these two aspects are presented. Simple and elaborated predictive analytical models are described and practical manufacture solutions are proposed to ease the implementation of this technique in practice.

Keywords

Failure Load Joint Strength Adhesive Joint Cohesive Element Load Displacement Curve 
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.

References

  1. 1.
    Avalle, M., Peroni, L., Peroni, M., Scattina, A.: Bi-material joining for car body structures: experimental and numerical analysis. J. Adhes. 86, 539–560 (2010)Google Scholar
  2. 2.
    Bouiadjra, B.B., Fekirini, H., Belhouari, M., Boutabout, B., Serier, B.: Fracture energy for repaired cracks with bonded composite patch having two adhesive bands in aircraft structures. Comp. Mater. Sci. 40, 20–26 (2007)CrossRefGoogle Scholar
  3. 3.
    Campilho, R.D.S.G., de Moura, M.F.S.F., Ramantani, D.A., Morais, J.J.L., Barreto, A.M.J.P., Domingues, J.J.M.S.: Adhesively-bonded repair proposal for wood members damaged by horizontal shear using carbon-epoxy patches. J. Adhes. 86, 649–670 (2010)Google Scholar
  4. 4.
    da Silva, L.F.M., Adams, R.D.: Measurement of the mechanical properties of structural adhesives in tension and shear over a wide range of temperatures. J. Adhes. Sci. Technol. 19, 109–142 (2005)CrossRefGoogle Scholar
  5. 5.
    da Silva, L.F.M., Adams, R.D.: Adhesive joints at high and low temperatures using similar and dissimilar adherends and dual adhesives. Int. J. Adhes. Adhes. 27, 216–226 (2007)CrossRefGoogle Scholar
  6. 6.
    da Silva, L.F.M., Adams, R.D.: Joint strength predictions for adhesive joints to be used over a wide temperature range. Int. J. Adhes. Adhes. 27, 362–379 (2007)CrossRefGoogle Scholar
  7. 7.
    da Silva, L.F.M., Lopes, M.J.C.Q.: Joint strength optimization by the mixed adhesive technique. Int. J. Adhes. Adhes. 29, 509–514 (2009)CrossRefGoogle Scholar
  8. 8.
    das Neves, P.J.C., da Silva, L.F.M., Adams, R.D.: Analysis of mixed adhesive bonded joints—Part I: Theoretical formulation. J. Adhes. Sci. Technol. 23, 1–34 (2009)CrossRefGoogle Scholar
  9. 9.
    das Neves, P.J.C., da Silva, L.F.M., Adams, R.D.: Analysis of mixed adhesive bonded joints—Part II: Parametric study. J. Adhes. Sci. Technol. 23, 35–61 (2009)CrossRefGoogle Scholar
  10. 10.
    Fitton, M.D., Broughton, J.G.: Variable modulus adhesives: an approach to optimised joint performance. Int. J. Adhes. Adhes. 25, 329–336 (2005)CrossRefGoogle Scholar
  11. 11.
    Frostig, Y., Thomsen, O.T., Mortensen, F.: Analysis of adhesive-bonded joints, square-end, and spew-fillet—high order theory approach. J. Eng. Mech. 125, 1298–1307 (1999)CrossRefGoogle Scholar
  12. 12.
    Giannis, S., Adams, R.D., Clark, L.J., Taylor, M.A.: The use of a modified peel specimen to assess the peel resistance of aircraft fuel tank sealants. Int. J. Adhes. Adhes. 28, 158–175 (2008)CrossRefGoogle Scholar
  13. 13.
    Harris, J.A., Adams, R.D.: Strength prediction of bonded single lap joints by non-linear finite element methods. Int. J. Adhes. Adhes. 4, 65–78 (1984)CrossRefGoogle Scholar
  14. 14.
    Harris, J.A., Adams, R.D.: An assessment of the impact performance of bonded joints for use in high energy absorbing structures. Proc. Inst. Mech. Eng. 199, C2, 121–131 (1985)Google Scholar
  15. 15.
    Hart-Smith, L.J.: Adhesive Bonded Double Lap Joints. NASA CR-112235 (1973)Google Scholar
  16. 16.
    Hergenrother, P.M.: Development of composites, adhesives and sealants for high-speed commercial airplanes. SAMPE J. 36, 30–41 (2000)Google Scholar
  17. 17.
    Marques, E.A.S., da Silva, L.F.M.: Joint strength optimization of adhesively bonded patches. J. Adhes. 84, 917–936 (2008)CrossRefGoogle Scholar
  18. 18.
    Marques, E.A.S., da Silva, L.F.M.: Stress analysis and failure properties of bonded ceramic-metal joints. International conference on advanced computational engineering and experimenting ACE-X 2008, Barcelona, Spain, 14–15 July (2008)Google Scholar
  19. 19.
    Marques, E.A.S., da Silva, L.F.M., Moreira, P.M.G.P.: Ceramic metal adhesive joints for high temperature aerospace applications. International conference on advanced computational engineering and experimenting ACE-X 2009, Rome, Italy, 22–23 July (2009)Google Scholar
  20. 20.
    Patrick, R.L. (ed.): Treatise on Adhesion and Adhesives—Structural Adhesives with Emphasis on Aerospace Applications, vol. 4. Marcel Dekker, Inc., New York (1976)Google Scholar
  21. 21.
    Pires, I., Quintino, L., Durodola, J.F., Beevers, A.: Performance of bi-adhesive bonded aluminium lap joints. Int. J. Adhes. Adhes. 23, 215–223 (2003)Google Scholar
  22. 22.
    Raphael, C.: Variable-adhesive bonded joints. Appl. Polym. Symp. 3, 99–108 (1966)Google Scholar
  23. 23.
    Sancaktar, E., Kumar, S.: Selective use of rubber toughening to optimize lap-joint strength. J. Adhes. Sci. Technol. 14, 1265–1296 (2000)CrossRefGoogle Scholar
  24. 24.
    Semerdjiev, S.: Metal to Metal Adhesive Bonding. Business Book Limited, London (1970)Google Scholar
  25. 25.
    Srinivas, S.: Analysis of Bonded Joints. NASA TN D-7855 (1975)Google Scholar
  26. 26.
    Temiz, S.: Application of bi-adhesive in double-strap joints subjected to bending moment. J. Adhes. Sci. Technol. 20, 1547–1560 (2006)CrossRefGoogle Scholar
  27. 27.
    Volkersen, O.: Die nietkraftoerteilung in zubeanspruchten nietverbindungen mit konstanten loschonquerschnitten. Luftfahrtforschung 15, 41–47 (1938)Google Scholar

Copyright information

© Springer-Verlag Berlin Heidelberg 2010

Authors and Affiliations

  1. 1.Department of Mechanical EngineeringFaculty of Engineering of the University of PortoPortoPortugal

Personalised recommendations