An Overview of Hydrogen Storage Methods

  • V. A. Yartys
  • M. V. Lototsky
Part of the NATO Science Series II: Mathematics, Physics and Chemistry book series (NAII, volume 172)

Abstract

Hydrogen is an attractive, pollution-free energy carrier, which is characterised in addition by a flexible and efficient energy conversion. Technology of hydrogen production is well developed and has advantage of practically unlimited basis of the raw materials. However, low density of hydrogen gas, low temperature of its liquefaction, as well as high explosive risk in combination with its negative influence on the properties of design materials bring to the forefront the problems of the development of effective and safe hydrogen storage systems. Namely these problems suppress at present the development of hydrogen power engineering and technology.

This paper reviews the existent and prospective hydrogen storage methods, observes the dynamics of their development in the last three decades. The special attention is paid to metal hydrides, both as to their direct usage in the hydrogen storage systems and concerning the maintenance of the alternative methods, to improve their efficiency.

On the basis of the analysis of available data, it is concluded that the best competitive position in the future will have combined systems realising several methods of hydrogen storage and processing. The methods could include small- and medium-scale metal hydride hydrogen storage units, as well as thermal sorption compressors providing gas-cylinder and cryogenic hydrogen storage systems. Buffer units for hydrogen storage, purification and controlled supply to a consumer could be in demand as well.

Keywords

Hydrogen Storage Metal Hydride Hydrogen Storage Capacity Hydrogen Sorption Metal Hydride 
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

References

  1. 1.
    F. Barbir, Review of Hydrogen Conversion Technologies, Clean Energy Research Inst., Univ. of Miami, Coral Gables, FL 33124, U.S.A.Google Scholar
  2. 2.
    J.O’M. Bockris, and T.N. Veziroglu, Environmental Conservation 12 (1985) 105CrossRefGoogle Scholar
  3. 3.
    T.N. Veziroglu and F. Barbir, Int. J. Hydrogen Energy 17 (1992) 391CrossRefGoogle Scholar
  4. 4.
    T.N. Veziroglu, in: Y. Yürüm (Ed), Hydrogen Energy System. Production and Utilization of Hydrogen and Future Aspects (NATO ASI, Series E, Vol.295), Kluwer Academic Publishers, Dordrecht—Boston—London, 1994, p.1Google Scholar
  5. 5.
    E.E. Spilrain, S.P. Malyshenko and G.G. Kuleshov, An Introduction to Hydrogen Energy, “Energo AtomIzdat”, Moscow, 1984 (in Russian)Google Scholar
  6. 6.
    J.O’M. Bockris and J.C. Wass, in: T.N. Veziroglu and A.N. Protsenko (Eds.), Hydrogen Energy Progress VII. Proc. 7th World Hydrogen Energy Conf., Moscow, U.S.S.R, 25–29 Sept. 1988, Vol.1, Pergamon Press, New York e.a., 1988, p. 101Google Scholar
  7. 7.
    A Multiyear Plan for the Hydrogen R&D Program. Rationale, Structure, and Technology Roadmaps, Office of Power Delivery, Office of Power Technologies, Energy Efficiency and Renewable Energy, U.S. Department of Energy, August 1999Google Scholar
  8. 8.
    Report to Congress on the Status and Progress of the DOE Hydrogen Program, February 4, 1999Google Scholar
  9. 9.
    International Energy Agency. Experience Curves for Energy Technology Policy, OECD/IEA, 2000Google Scholar
  10. 10.
    List of Task 12 Publications and Presentations. IEA Task 12: Metal Hydrides and Carbon for Hydrogen Storage, 2001Google Scholar
  11. 11.
    J. Pettersson and O. Hjortsberg (Volvo Teknisk Utveckling AB), Hydrogen storage alternatives — a technological and economic assessment, KFB-Meddelande 1999:27, published December 1999, KFBs DNR 1998-0047Google Scholar
  12. 12.
    R. Wurster, Overview of Existing Experience in Hydrogen and Fuel Cells in Germany and Europe, Recherches et perspectives industrielles sur la pile à combustible et ľhydrogène Paris, 13 décembre 2001Google Scholar
  13. 13.
    D.Yu. Hamburg and N.F. Dubovkin (Eds.), Hydrogen: Properties, Production, Storage, Transportation, Applications. Reference Book, “Khimia”, Moscow, 1989 (in Russian)Google Scholar
  14. 14.
    Properties of Fuels, Alternative Fuels Data Center (AFDC); US Department of Energy, Office of Transportation Technologies, http://www.afdc.doe.gov/pdfs/fueltable.pdf
  15. 15.
    Hydrogen Energy Equivalents, H-ION SOLAR, Inc, http://www.hionsolar.com/n-heq1.html
  16. 16.
  17. 17.
    G. Nicoletti, Int. J. Hydrogen Energy, 20 (1995) 759CrossRefGoogle Scholar
  18. 18.
    W. Zittel and R. Wurster, Hydrogen in the Energy Sector, Ludwig-Bölkow-Systemtechnik GmbH, — Issue: 8.7.1996, http://www.hyweb.de/Knowledge/w-i-energiew-eng.html
  19. 19.
    M.P. Malkov (Ed.), Reference Book on Physical-Technical Basics of Cryogenics, “EnergoAtomIzdat”, Moscow, 1985 (in Russian)Google Scholar
  20. 20.
    L. Schlapbach, Materials Research Bulletin, 27 (2002) 675Google Scholar
  21. 21.
    L. Browning, Projected Automotive Fuel Cell Use in California, P600-01-022, Consultant Report — Prepared for California Energy Commission, October 2001Google Scholar
  22. 22.
    R. Ramachandran and R.K. Menon, Int. J. Hydrogen Energy, 23 (1998) 593CrossRefGoogle Scholar
  23. 23.
    V.V. Solovey (Ed.), Development of the concept of increasing the efficiency of alternative energy carriers and non-conventional power sources in the production complex of the Ukraine, Report by A.N.Podgorny Institute of Mechanical Engineering Problems of National Academy of Sciences of Ukraine, Kharkov, 2000.Google Scholar
  24. 24.
    Composite Cylinders Latest Developments, by Dynetek Advanced Lightweight Fuel Storage Systems TM; Asia-Pacific Natural Gas Vehicles Summit, Brisbane, Australia; April 10, 2001; Rene Rutz, VP Marketing & Business DevelopmentGoogle Scholar
  25. 25.
    Quantum Technologies, Inc., http://www.qtww.com
  26. 26.
    Hydrogen composite tank program, Proc. 2002 U.S. DOE Hydrogen Program Review NREL/CP-610-32405Google Scholar
  27. 27.
    R.S. Irani, Materials Research Bulletin, 27 (2002) 680Google Scholar
  28. 28.
    PDC Machines, Inc. (www.pdcmachines.com), compressors data.Google Scholar
  29. 29.
    RIX Industries (www.rixindustries.com), RIX 3KX series compressorsGoogle Scholar
  30. 30.
    D. Hart, Hydrogen Power: The Commercial Future of the “Ultimate Fuel”, Financial Times Energy Publishing, a Division of Pearson Professional Limited, 1997Google Scholar
  31. 31.
    R.D. Venter and G. Pucher, Int. J. Hydrogen Energy 22 (1997) 791CrossRefGoogle Scholar
  32. 32.
    J. Wolf, Materials Research Bulletin 27 (2002) 684Google Scholar
  33. 33.
    Space Shuttle Projects Office, http://shuttle.msfc.nasa.gov
  34. 34.
    KNOW HOW, 2/2000, LINDE TECHNISCHE GASE GMBH.Google Scholar
  35. 35.
    S.M. Aceves, J. Martinez-Friaz and O. Garsia-Villazana. Low temperature and high pressure evaluation of insulated pressure vessels for cryogenic hydrogen storage, Proc. 2000 Hydrogen Program Review, NREL/CP—570-28890Google Scholar
  36. 36.
    S.M. Aceves, J. Martinez-Frias, O. Garsia-Villazana and F. Espinosa-Loza, Performance and certification testing of insulated pressure vessels for vehicular hydrogen storage, Proc. 2001 DOE Hydrogen Program Review, NREL/CP-570-30535Google Scholar
  37. 37.
    J. Weitkamp, M. Fritz and S. Ernst, Int. J. Hydrogen Energy 20 (1995) 967CrossRefGoogle Scholar
  38. 38.
    N.L. Rosi, e.a. Science 300 (2003) 1127CrossRefADSPubMedGoogle Scholar
  39. 39.
    L. Schlapbach and A. Züttel, Nature 414 (2001) 353CrossRefADSPubMedGoogle Scholar
  40. 40.
    V.I. Trefilov, D.V. Schur e.a., Fullerenes, “ADEF Ukraine”, Kiev, 2001 (in Russian)Google Scholar
  41. 41.
    A. Züttel and S.-I. Orimo, Materials Research Bulletin 27 (2002) 705Google Scholar
  42. 42.
    A.C. Dillon, e.a., Hydrogen storage in carbon single-wall nanotubes, Proc. 2002 DOE hydrogen program review, 2002, National renewable energy laboratory, Golden, CO 80401-3393.Google Scholar
  43. 43.
    M. Hirscher, e.a., Applied Physics A-Materials Science & Processing, 72 (2001) 129ADSCrossRefGoogle Scholar
  44. 44.
    A. Chambers, C. Park, R.T.K. Baker and N.M. Rodriges, J. Phys. Chem. B102 (1998) 4253Google Scholar
  45. 45.
    A. Züttel, e.a., J. Alloys and Compounds 330 (2002) 676CrossRefGoogle Scholar
  46. 46.
    R. Strobel, e.a., J. Power Sources, 84 (1999) 221CrossRefGoogle Scholar
  47. 47.
    M.G. Nijkamp, e.a., Applied Physics A-Materials Science & Processing 72 (2001) 619ADSCrossRefGoogle Scholar
  48. 48.
    R. Chahine and T.K. Bose, Int. J. Hydrogen Energy 19 (1994) 161CrossRefGoogle Scholar
  49. 49.
    B.P. Tarasov, J.P. Maehlen, e.a., J. Alloys and Compounds 356–357C (2003) 510CrossRefGoogle Scholar
  50. 50.
    D.V. Schur, B.P. Tarasov, e.a., in: T.N. Veziroglu et al (Eds.), Hydrogen Materials Science and Chemistry of Metal Hydrides (NATO Science Series II, Vol.82), Kluwer Academic Publishers, 2002, p.1Google Scholar
  51. 51.
    B.A. Troshenkin, Circulation and film evaporators and hydrogen reactors, “Naukova Dumka”, Kiev, 1985 (in Russian)Google Scholar
  52. 52.
    M. Mueller, J.P. Blackledge and G.G. Libovitz (Eds.), Metal Hydrides, Academic Press, New York & London, 1968Google Scholar
  53. 53.
    V.A. Yartys, V.V. Burnasheva and K.N. Semenenko, Uspekhi Khimii 52 (1983) 529 (in Russian)Google Scholar
  54. 54.
    W.B. Pearson. The crystal Chemistry and Physics of Metals and Alloys, Russian Translation (in 2 volumes), “Mir”, Moscow, 1977Google Scholar
  55. 55.
    P. Villars and L.D. Calvert. Pearson’s Handbook of Crystallographic Data for Intermetallic Phases, Second Edition. Volume 4.— ASM International, The Materials Information Society, Materials Park, OH 44073.Google Scholar
  56. 56.
    G. Sandrock, J. Alloys and Compounds 293–295 (1999) 877CrossRefGoogle Scholar
  57. 57.
    P. Dantzer, in: H. Wipf (Ed.), Hydrogen in Metals. III. Properties and Applications (Topics in Applied Physics, Vol. 73), Springer-Verlag, Berlin-Heidelberg, 1997, p.279Google Scholar
  58. 58.
    G. Sandrock, S. Suda and L. Schlapbach, in: L. Schlapbach (Ed.), Hydrogen in Intermetallic Compounds. II. Surface and Dynamic Properties, Applications, Springer-Verlag, 1992, p.197Google Scholar
  59. 59.
    R.C. Bowman, Jr. and B. Fultz, Materials Research Bulletin 27 (2002) 688Google Scholar
  60. 60.
    J.-M. Joubert, M. Latroche and A. Percheron-Guegan, Ibid. 694Google Scholar
  61. 61.
    E. Akiba and M. Okada, Ibid. 699Google Scholar
  62. 62.
    B. Bogdanovic and G. Sandrock, Ibid. 712Google Scholar
  63. 63.
    K.J. Gross, G.J. Thomas, G. Sandrock, Hydride Development for Hydrogen Storage, Proc. 2000 Hydrogen Program Review, NREL/CP-570-28890.Google Scholar
  64. 64.
    J. Tolle, Ti-oder Ti-und Fe-dotierte Natriumalanate als nue reversible Wasserstoffspeichermaterialien, Dissertation aus dem Max-Planck-Institut fur Kohlenforschung, Mulheim am Rhur, 1998, Bd.4, S.1–144.Google Scholar
  65. 65.
    B. Bogdanovic, e.a., J. Alloys and Compounds 302 (2000) 36CrossRefGoogle Scholar
  66. 66.
    P. Dantzer, F. Meuner, Materials Science Forum 31 (1988) 1CrossRefGoogle Scholar
  67. 67.
    B.A. Kolachev, R.E. Shalin, A.A. Iľin. Alloys for Hydrogen Storage: Reference Book, “Metallurgy”, Moscow, 1995 (in Russian)Google Scholar
  68. 68.
    E.L. Huston, G.D. Sandrok, J. Less-Common Metals 74 (1985) 435CrossRefGoogle Scholar
  69. 69.
    G.G. Libowitz, K.T. Feldman Jr., C. Stein, J. Alloys and Compounds 253–254 (1997) 673CrossRefGoogle Scholar
  70. 70.
    V.V. Solovey, Yu.F. Shmaľko and M.V. Lototsky, Problemy Mashinostroeniya (J. of Mechanical Engineering) 1 (1998) 115 (in Russian).Google Scholar
  71. 71.
    Yu.F. Shmaľko, A.I. Ivanovsky, e.a., in: T.N. Veziroglu, e.a. (Eds), Hydrogen Energy Progress. XI. Proc. 11-th World Hydrogen Energy Conf., Stuttgart, Germany, 23–28 June, 1996, Int. Association for Hydrogen Energy, 1996, vol. 2, p.1335Google Scholar
  72. 72.
    V. A. Yartys, e.a., J.Alloys and Compounds 330–332 (2002) 132CrossRefGoogle Scholar
  73. 73.
    Ergenics, Inc. 373 Margaret King Ave. Ringwood, NJ 07456, USA; http://www.hydrides.com/
  74. 74.
    Hydrogen Components, Inc. 12420 North Dumont Way, Littleton, CO 80125, USA; http://www.hydrogencomponents.com/
  75. 75.
    ECD Ovonics. 2956 Waterview Drive Rochester Hills, Michigan 48309, USA; http://www.ovonic.com/
  76. 76.
    The Japan Steel Works, Ltd. Hydrogen Energy Center. Hibiya Mitsui Bldg., 1–2, Yurakucho 1-Chome, Chioda-ku Tokyo 100-0006, Japan; http://www.jsw.co.jp/
  77. 77.
    Japan Metals & Chemicals Co., Ltd. Department of Metal Hydride Alloy Business. 8-4 Koami-Cho, Nihonbashi, Chuo-ku, Tokyo 103-8531, Japan; http://www.jmc.co.jp
  78. 78.
    GfE Gesellschaft für Elektrometallurgie mbH. Hoefener Strasse 45 D-90431 Nuremberg, Germany; http://www.gfe-online.de
  79. 79.
    HERA Hydrogen Storage Systems, GmbH. 577 Le Breton Longueuil, Québec, Canada J4G 1R9; Hoefener Strasse 45, 90431, Nuremberg, Germany; http://www.herahydrogen.com/
  80. 80.
    Institute for Energy Technology, P.O.Box 40, Kjeller, N 2027, Norway; http://www.ife.no
  81. 81.
    LABTECH Int. Co. Ltd. Alloys Research and Manufacturing. Mladost-1, bl.25/A, Sofia-1784, BULGARIA; http://labtech.solo.bg/
  82. 82.
    Chinese Academy of Sciences. Zhong guan kun, Beijing 100080, People’s Republic of China.Google Scholar
  83. 83.
    PA “Moscow Polymetal Plant”, 49 Kashirskoe Road, Moscow 116409, RussiaGoogle Scholar
  84. 84.
    A.N.Podgorny Institute of Mechanical Engineering Problems of National Academy of Sciences of Ukraine, 2/10 Pozharsky Str., Kharkov 61046, Ukraine; http://ipmach.kharkov.ua
  85. 85.
    Institute for Problems in Materials Science of National Academy of Sciences of Ukraine, 3 Krzhyzhanovsky Str., Kiev 03180, Ukraine; http://hydro.ipms.kiev.ua
  86. 86.
    T. Schucan, Case Studies of Integrated Hydrogen Energy Systems, International Energy Agency. Hydrogen Implementing Agreement. Task 11: Integrated Systems Final report of Subtask A, Chapter 2, IEA/H2/T11/FR1-2000Google Scholar
  87. 87.
    J.R. Johnson, J.Less-Common Met., 73 (1980) 345CrossRefGoogle Scholar
  88. 88.
    O. Beeri, e.a., J. Alloys and Compounds, 267 (1998) 113CrossRefGoogle Scholar
  89. 89.
    B.P. Tarasov, e.a., in: D.V. Schur, S.Yu. Zaginaichenko and T.N. Veziroglu (Eds.), Hydrogen Materials Science and Chemistry of Carbon Nanomaterials (ICHMS’2003) VIII International Conference, Sudak — Crimea — Ukraine, September 14–20, 2003, Kiev: 2003, p.298–301.Google Scholar
  90. 90.
    K. Nasako, Y. Ito, N. Hiro, M. Osumi, J. Alloys and Compounds 264 (1998) 271CrossRefGoogle Scholar
  91. 91.
    M. Au, e.a., Int. J. Hydrogen Energy 21 (1996) 33CrossRefGoogle Scholar
  92. 92.
    V.A. Yartys and M.V. Lototsky. Metal Hydride High Pressure Hydrogen Compression: Present Status. — Review, Institute for Energy Technology, Department of Energy Systems, 2002Google Scholar

Copyright information

© Kluwer Academic Publishers 2004

Authors and Affiliations

  • V. A. Yartys
    • 1
  • M. V. Lototsky
    • 1
    • 2
  1. 1.Institute for Energy TechnologyKjellerNorway
  2. 2.Lab.#67Institute for Problems of Material Science of National Academy of Sciences of UkraineKievUkraine

Personalised recommendations