Cryocoolers 10 pp 565-574 | Cite as

Fast Gas-Gap Heat Switch for a Microcooler

  • J.F. Burger
  • H.J. Holland
  • H. van Egmond
  • M. Elwenspoek
  • H.J.M. ter Brake
  • H. Rogalla

Abstract

A sorption compressor requires heat switches to thermally isolate the cells during heating, and to connect them to a heat sink during cooling. The requirements for these heat switches are discussed and related to important compressor parameters. It is shown that under certain conditions a sorption compressor can be operated without heat switches at all. Furthermore, the static heat transfer behaviour of a gas gap is modelled in detail and compared with experiments on a 300 μm gas gap. Finally, the dynamics that limit the switching speed are discussed.

Keywords

Heat Transfer Coefficient Thermal Resistance Heat Sink Thermal Mass Sorption Material 
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

References

  1. 1.
    Burger, J.F., ter Brake, H.J.M., Elwenspoek, M., Rogalla, H., Microcooling: Study on the application of micromechanical techniques, Cryocoolers 9, Plenum Press, New York (1997), pp. 687–696.Google Scholar
  2. 2.
    Burger, J.F., Holland, H.J., Wade, L.A., ter Brake, H.J.M., Rogalla, H., Thermodynamic considerations on a microminiature sorption cooler, Cryocoolers 10, Plenum Press, New York (1998).Google Scholar
  3. 3.
    Chan, C.K., Self-actuated heat switches for redundant cryocoolers, Proc. 2nd Interagency Meeting on Cryocoolers, Easton MD (1986).Google Scholar
  4. 4.
    Bard, S., Jones, J.A., Regenerative sorption compressors fro cryogenic refrigeration, Advances in. cryogenic engineering, Vol. 35, Plenum Press, New York (1990).Google Scholar
  5. 5.
    Johnson, D.L., Wu, J.J., Feasibility demonstration of a thermal switch for dual temperature IR focal plane cooling, Cryocoolers 9, Plenum Press, New York (1997).Google Scholar
  6. 6.
    Kashani, A., Helvensteijn, B.P.M., McCormack, F.J., Spivak, A.L., Helium liquid-and gas-gap heat switches, Proc. 7th Cryocooler Conf. (1992), pp. 355–370.Google Scholar
  7. 7.
    Roth, A., Vacuum technology, Elsevier, Amsterdam (1990).Google Scholar
  8. 8.
    Corruccini, R.J., Gaseous heat conduction at low pressures and temperatures, Vacuum (1959).Google Scholar
  9. 9.
    Wade, L.A., Performance, reliability, and life of hydride compressor components for 10 to 30 K. sorption Cryocoolers, Adv. in Cryogenic Eng., vol. 39, Plenum Press, (1994), pp. 1483–1490.Google Scholar
  10. 11.
    Bowman, R.C., Personal communication (1998).Google Scholar

Copyright information

© Kluwer Academic Publishers 2002

Authors and Affiliations

  • J.F. Burger
    • 1
  • H.J. Holland
    • 1
  • H. van Egmond
    • 1
  • M. Elwenspoek
    • 1
  • H.J.M. ter Brake
    • 1
  • H. Rogalla
    • 1
  1. 1.Faculty of Applied PhysicsUniversity of TwenteEnschedeThe Netherlands

Personalised recommendations