Abstract
This paper aims to study the compressive strength of concrete made using Linz-Donawitz (LD) slag as a replacement for natural fine and coarse aggregate with both getting replaced up to 100% at an interval of 20% respectively. Concrete of grades M20, M25, M30, M35 and M40 has been considered for studying their compressive behaviour when natural aggregates are being gradually replaced with LD slag. The results obtain showed an increase in compressive strength of the concretes with the increase in percentage replacement of natural fine and coarse aggregates with LD slag.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Motz, H., & Geiseler, J. (2001). Products of steel slags an opportunity to save natural resources. Waste Management, 21, 285–293.
Xue, Yongjie, Shaopeng, Wu, Hou, Haobo, & Zha, Jin. (2006). Experimental investigation of basic oxygen furnace slag used as aggregate in asphalt mixture. Journal of Hazardous Materials B, 138, 261–268.
Reddy, A. S., Pradhan, R. K., & Chandra, S. (2006). Utilization of basic oxygen furnace (BOF) slag in the production of a hydraulic cement binder. International Journal of Mineral Processing, 79(2), 98–105.
Wu, S., et al. (2007). Utilization of steel slag as aggregates for stone mastic asphalt (SMA) mixtures. Building and Environment, 42, 2580–2585.
Tsakiridis, P. E., Papadimitriou, G. D., Tsivilis, S., & Koroneos, C. (2008). Utilization of steel slag for Portland cement clinker production. Journal of Hazardous Materials, 152, 805–811.
Kehagia, F. (2008). Skid resistance performance of asphalt wearing courses with electric arc furnace slag aggregates. Waste Management and Research, 27, 288–294.
Ahmedzadea, Perviz, & Sengoz, Burak. (2009). Evaluation of steel slag coarse aggregate in hot mix asphalt concrete. Journal of Hazardous Materials, 165, 300–305.
Qasrawi, Hisham, Shalabi, Faisal, & Asi, Ibrahim. (2009). Use of low CaO unprocessed steel slag in concrete as fine aggregate. Construction and Building Materials, 23, 1118–1125.
Wang, George, Wang, Yuhong, & Gaob, Zhili. (2010). Use of steel slag as a granular material: Volume expansion prediction and usability criteria. Journal of Hazardous Materials, 184, 555–560.
Safiuddin, Md, Jumaat, Mohd Zamin, Salam, M. A., Islam, M. S., & Hashim, R. (2010). Utilization of solid wastes in construction materials. International Journal of the Physical Sciences., 5(13), 1952–1963.
Qasrawi, Hisham. (2014). The use of steel slag aggregate to enhance the mechanical properties of recycled aggregate concrete and retain the environment. Construction and Building Materials, 54, 298–304.
Chen, Zongwu, Shaopeng, Wu, Wen, Jin, Zhao, Meiling, Yi, Mingwei, & Wan, Jiuming. (2015). Utilization of gneiss coarse aggregate and steel slag fine aggregate in asphalt mixture. Construction and Building Materials, 93, 911–918.
Arribas, I., et al. (2015). Electric arc furnace slag and its use in hydraulic concrete. Construction and Building Materials, 90, 68–79.
Pang, Bo, Zhou, Zonghui, & Hongxin, Xu. (2015). Utilization of carbonated and granulated steel slag aggregate in concrete. Construction and Building Materials, 84, 454–467.
Wang, G. C. (2016). The utilization of slag in civil infrastructure construction. Elsevier, Cambridge: Woodhead Publishing.
Péra, Jean, Ambroise, Jean, & Chabannet, Michel. (1999). Properties of blast-furnace slags containing high amounts of manganese. Cement and Concrete Research, 29, 171–177.
Kriskova, L., Pontikes, Y., Cizer, Ö., Mertens, G., Veulemans, W., Geysen, D., et al. (2012). Effect of mechanical activation on the hydraulic properties of stainless steel slags. Cement and Concrete Research, 42(6), 778–788.
Sajedi, F., et al. (2012). Relationships between compressive strength of cement-slag mortars under air and water curing regimes. Construction and Building Materials, 31, 188–196.
Teng, S., Lim, T. Y. D., & Divsholi, B. S. (2013). Durability and mechanical properties of high-strength concrete incorporating ultrafine ground granulated blast-furnace slag. Construction and Building Materials, 40, 875–881.
Roslan, N. H., Ismail, M., Abdul-Majid, Z., Ghoreishiamiri, S., & Muhammad, B. (2016). Performance of steel slag and steel sludge in concrete. Construction and Building Materials, 104, 16–24.
Qiang, Wang, Mengxiao, Shi, & Jun, Yang. (2016). Influence of classified steel slag with particle sizes smaller than 20 µm on the properties of cement and concrete. Construction and Building Materials, 123, 601–610.
Grubeša, I. N., Barišić, I., Fucic, A., & Bansode, S. S. (2016). Characteristics and uses of steel slag in building construction. Elsevier, Cambridge: Woodhead Publishing.
IS 455: 1989—Specifications for PSC (Portland slag cement).
IS 4031: 1996—Methods of physical tests for hydraulic cement.
IS 269: 2015—Specifications for 33 grade OPC.
Maslehuddin, M., Sharif, A. M., Shameem, M., Ibrahim, M., & Barry, M. S. (2003). Comparison of properties of steel slag and crushed limestone aggregate concretes. Construction and Building Materials, 17(2), 105–112.
IS 383: 2016—Specifications for fine and coarse aggregate from natural sources for concrete.
IS 2386: 1963—Methods of tests for aggregates for concrete.
IS 10262: 2009—Guidelines for concrete mix design proportioning.
IS 456: 2000—Code of practice for plain and reinforced concretes.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2019 Springer Nature Singapore Pte Ltd.
About this paper
Cite this paper
Kumar, V., Prasad, B., Chakraborty, S., Singh, P., Rama Murthy, Y., Kapure, G. (2019). Experimental Investigation on Compressive Strength of LD Slag Aggregate Concrete. In: Das, B., Neithalath, N. (eds) Sustainable Construction and Building Materials. Lecture Notes in Civil Engineering , vol 25. Springer, Singapore. https://doi.org/10.1007/978-981-13-3317-0_43
Download citation
DOI: https://doi.org/10.1007/978-981-13-3317-0_43
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-13-3316-3
Online ISBN: 978-981-13-3317-0
eBook Packages: EngineeringEngineering (R0)