Abstract
The core of the active safety is the perception and control of system state. By modelling, analyzing and controlling the activities of complex system, so as to reduce the system risk and avoid accident. Active safety theory has spread into many fields including electrical system, power system, Internet, military system, machinery and electronics system and so on. Methods based on the mechanism model, data drive and so on have been researched a lot to realize the active safety. Specifically, rail transportation active safety also attracts lots of attentions. The authors have been engaged in this area for a long time, mainly including the active safety assurance of the rail transportation train, rail network, traffic system and so on. Fruitful achievements have been made based on the research team. In this book, the authors mainly show readers the safety region based active safety methodology and its application in rail transportation.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
A.E. Mohamed, A.A. Essam, Framework for identification of power system operating safety regions. The Third International Conference on Net-work and System Safety, Queensland, 2009, pp. 415–419
Y.U. Yixin, Review of study on methodology of safety regions of power system. J. Tianjin Univ. 41(6), 635–646 (Ch) (2008)
Y. Zhang, Y. Qin, L. Jia, et al., Research on method framework of safety region estimation in rail transportation system operation safety assessment. J. Syst. Simul. Technol. Appl. 13, 1018–1022 (2011)
Y. Zhang, Y. Qin, L. Jia, Research on methodology of safety region estimation of railway system operation safety assessment. Proceedings of World Congress on Engineering and Technology 2011, 06, pp. 803–807
T. Zheng, Y. Pan, K. Guo, et al., Study on fault location method of distribution network based on immune algorithm. Power. Syst. Protect. Control. 42(1), 77–83 (2014)
T. Yi, Z. Xin, Z. Xin, Z. Liang, Study on the recognition method of automobile operation state (I) – selection of characteristic parameters. China. Mech. Eng. 24(9), 1258–1263 (2013)
X. Shaobo, Z. Jianmei, X. Zhu, et al., An improved DV-Hop algorithm based on the hop count region. Chin. J. Sens. Actuarors. 27(7), 964–969 (2014)
M.S. Safizadeh, S.K. Latifi, Using multi-sensor data fusion for vibration fault diagnosis of rolling element bearings by accelerometer and load cell. Inf. Fusion. 18, 1–8 (2014)
Y. Zhiyong, Classifier Based on Decision-Making Boundaries in the Perspective of Partitioning Data Space. Zhejiang University, Hangzhou, 2011
Z. Xiang, H.-H. Shen, C. Bing, A cross-safety access control method based on bidirectional defense. Netinfo. Saf. 10, 19–21 (2009)
Z. Zhijie, Safety Domain Division of the Key Theory and Application of [D]. Kunming University of Science and Technology, Kunming, 2006, pp. 5–15
N. Wensheng, L. Yahui, Z. Yadi, Research on access control mechanism of embedded systems based on safety domain isolation. Comput. Sci. 40(06A), 320–322 (2013)
N. Wang, Z. Ying-Jian, Z. Jian-Hui, et al., An identity-based routing protocol for secure domain access. J. Softw. 20(12), 3223–3239 (2009)
D. Xiang, Y. Wei, Research on vehicle image recognition and longitudinal safety domain control in front of vehicle. Sci. Technol. Eng. 1, 100–104 (2014)
M. Barzegar, N. Mozayani, M. Fathy, Secure safety messages broadcasting in vehicular network. International Conference on Advanced Information Networking and Applications Workshops, Bradford, 2009, pp. 1055–1060
W. Miao, L. Jie, H. Yanjun, Research and application of safety domain division technology in e-government. Comput. Eng. Sci. 32(8), 52–55 (2010)
R.J. Kaye, F.F. Wu, Dynamic safety regions of power systems. IEEE Trans. Circ. Syst CAS-29(9), 612–623 (1982)
Y. Yu, F. Fei, Active power steady-state safety region of power system. Sci. China. Ser. A 33(121), 1488–1500 (1990)
Y. Makarov, P. Du, S. Lu, T. B. Nguyen, Wide area safety region final report [EB/OL]. http://www.pnl.gov/main/publications/external/technical_reports/PNNL-19331.pdf, March 2010
A. E. Mohamed, A. A. Essam, Framework for identification of power system operating safety regions. The Third International Conference on Network and System Safety, Queensland, 2009, pp. 415–419
A. Essam, A. Mohamed, Application of operating safety regions in power systems. IEEE PES Transmission and Distribution Conference and Exposition. New Orleans, LA, USA, 2010
Z. Yuan, F. Jichao, Y. Yu, et al., A practical dynamic safety domain for power system. Autom. Electr. Power. Syst. 1, 6–10 (2001)
Y.Y. Yanbin, Z. Yuan, J. Hongjie, N. Ben, H. Nanqiang, T. Zhiyu, Z. Yiming, F. Hongjun, Visual dimension visualization using dynamic secure domain. Autom. Electr. Power. Syst. 29(12), 44–48 (2005)
L.-j. Wang, G. Wang, Performance evaluation of transient stability of power systems based on dynamic safety and edgeworth series. Proc. CSEE 31(1), 52–58 (2011)
J. Xue-song, L. Liang, X. Xin-biao, et al., Numerical simulation of dynamic behaviors of high-speed trains in complex environment and analysis of operational safety domains. Comput. Aided. Eng. 03, 29–41 (2011). 59
M. Yu, Z. Jiye, Z. Weihua, Safety of transverse wind traffics on high speed trains on bridges. Chin. J. Mech. Eng. 48(18), 104–111 (2012)
Z. Yuan, Q. Yong, J. Limin, et al., Study on safety domain estimation method for operational safety assessment of rail transportation system. Syst. Simul. Technol. Appl. 13, 1018–1022 (2011)
Y. Zhang, Y. Qin, Z. Xing, et al., Roller bearing safety region estimation and state identification based on LMD–PCA–LSSVM. Measurement 46(3), 1315–1324 (2013)
Z. Yuan, Q. Yong, J. Limin, A estimation of uneven-peak or peak-safe-area based on distribution of risk Points-SVM. J. Cent. South. Univ. Sci. Technol. 43(11), 4533–4541 (2012)
A. Amini et al., Wayside detection of faults in railway axle bearings using time spectral kurtosis analysis on high-frequency acoustic emission signals. Adv. Mech. Eng., 8(11) (2016)
J.S. Goo, J.S. Kim, K.B. Shin, Evaluation of structural integrity after ballast-flying impact damage of a GFRP lightweight bogie frame for railway vehicles. J. Mech. Sci. Technol. 29(6), 2349–2356 (2015)
S. Bruni, R. Goodall, T.X. Mei, H. Tsunashima, Control and monitoring for railway vehicle dynamics. Veh. Syst. Dyn. Int. J. Veh. Mech. Mob. 45(7–8), 743–779 (2007)
M.H. Gharavian, F.A. Ganj, A.R. Ohadi, et al., Comparison of FDA-based and PCA-based features in fault diagnosis of automobile gearboxes. Neurocomputing 121, 150–159 (2013)
X. Qian, F. Jun, L. Wang, Effect of friction coefficient on instantaneous rolling contact fatigue of high-speed train wheels. China. Railw. Sci. 37(3), 68–74 (2016)
Z. Rong, S. Hongmei, Research on wheel galling identification algorithm of high speed trains based on high order spectral feature extraction. Chin. J. Mech. Eng. 53(6), 102–109 (2017)
H. Peng, Z. Weihua, Statistic rule and prediction model of wheel pair wear of high speed train. Chin. J. Mech. Eng. 52(2), 144–149 (2016)
C. Qingsong, X. Guo, X. Guoliang, et al., Study on dynamic characteristics of high speed train bearing loose bearing. Chin. J. Mech. Eng. 21, 87–95 (2016)
W. Jing, Study on Vibration Characteristics of Train Wheels and Key Techniques of Diagnosis. Central South University, Changsha, 2012, pp. 5–10
F. Yu, C. Long, S. Zheng, et al., Monitoring method of rail vehicle suspension system based on parameter estimation. J. China. Railw. Soc. 35(5), 15–20 (2013)
Science and Technology Department of Liaoning Province, Application of optical fiber sensing technology in condition monitoring of train body and railway facilities [EB/OL]. http://www.lninfo.gov.cn/kjzx/show.phpitemid=423266, 2010, pp. 11–12
I. Aydin, M. Karakose, E. Akin, Anomaly detection using a modified kernel-based tracking in the pantograph–catenary system. Expert Syst. Appl. 42(2), 938–948 (2015)
E. Karakose, M.T. Gencoglu, M. Karakose, et al., A new arc detection method based on fuzzy logic using S-transform for pantograph–catenary systems. J. Intell. Manuf., 1–18 (2015)
M. Bocciolone, G. Bucca, A. Collina, L. Comolli, An approach to monitor railway pantograph-catenary interaction with fiber optic sensors. Proceedings of the SPIE-The International Society for Optical Engineering, 2010, 7653:76533Q (4 pp.)
G. Bucca, A. Collina, A procedure for the wear prediction of collector strip and contact wire in pantograph–catenary system. Wear 266(1), 46–59 (2009)
E.A. Mohamed, A.Y. Abdelaziz, A.S. Mostafa, A neural network-based scheme for fault diagnosis of power transformers. Electr. Power Syst. Res. 75(1), 29–39 (2005)
S. Hedayati Kia, H. Henao, G.A. Capolino, Mechanical health assessment of a railway traction system. The 14th IEEE Mediterranean Electrotechnical Conference, Ajaccio, France, 2008, pp. 453–458
D. Grillo, C. Landi), M. Luiso, N. Pasquino, An on-board monitoring system for electrical railway traction systems. IMTC 2006 – Instrumentation and Measurement Technology Conference, Sorrento, Italy, 24–27 April 2006, pp. 2306–2311
H. Kamijo, H. Hata, H. Fujimoto, A. Inoue, K. Nagashima, K. Ikeda, A. Iwakuma, K. Funaki, Y. Sanuki, A. Tomioka, H. Yamada, K. Uwamori, S. Yoshida, Tests of superconducting traction transformer for railway rolling stock. IEEE Trans. Appl. Supercond. 17(2), 1927–1930 (2007)
M. Mermet-Guyennet, M. Piton, Railway traction reliability. The 6th International Conference on Integrated Power Electronics Systems (CIPS), Germany, 16–18 March 2010, pp. 1–6
Z. Yuan, Q. Yong, X. Cheng, P. Xuemiao, X. Zongyi, Relationship analysis between contact surface unevenness and bow mesh contact force based on improved NARX Neural Network. China. Railw. Sci. 33(3), 84–91 (2012)
L. Kai, F. Yao-ping, L. Ying-long, Design and implementation of bow network monitoring system. Comput. Meas. Contr. 14(5), 600–602 (2006)
P. Wei, D. He, M. Jian, X. Yang, Study on condition monitoring and fault diagnosis of pantograph. J. Guangxi Univ. Nat. Sci. Ed. 36(5), 718–722 (2011)
Z. Yanyan, Metro Vehicle Traction System Fault Diagnosis Technology and System. Beijing Jiaotong University, Beijing, 2009, pp. 11–25
C. Xiao-xuan, L. Yong-yi, S. Yong-teng, Fault diagnosis of locomotive traction motor based on neural network information fusion. Comput. Meas. Contr. 15(5), 563–565, 573 (2007)
L Ling, Research on Fault Diagnosis of Traction Converter. Southwest Jiaotong University, Chengdu 2010, pp. 5–35
W Yi, Locomotive Traction Converter Fault Diagnosis Based on Data Mining. Southwest Jiaotong University, Chengdu, 2005, pp. 15–26
G. Niu, Y. Zhao, M. Defoort, et al., Fault diagnosis of locomotive electro-pneumatic brake through uncertain bond graph modeling and robust online monitoring. Mech. Syst. Signal Process. 50, 676–691 (2015)
X. Zhuan, X. Xia, Fault-tolerant control of heavy-haul trains. Veh. Syst. Dyn. Int. J. Veh. Mech. Mob. 48(6), 705–735 (2010)
L. Wan-xin, Z. Yang, R.-w. Lin, et al., Fault diagnosis and safety measures for brake system of harmony No. EMU. Railw. Locomot. Car. 31(5), 39–42 (2011)
J. Liu, Y.F. Li, E. Zio, A SVM framework for fault detection of the braking system in a high speed train. Mech. Syst. Signal Process. 87, 401–409 (2017)
C. Guoqiang, J. Yang, Z. Liming, J. Limin, Reliability analysis of passenger brake system of metro vehicles based on FTA. Int. Conf. Model. Simul. Optim. Beijing, 323–328 (2009)
D. Jianbo, C. Hangfeng, The design of fault diagnosis system of 120-type freight train brake. 2011 International Conference on Electric Information and Control Engineering (ICEICE), Wuhan, 2011, pp. 5463–5465
X. Wang, M. Wu, Research on unit brake reliability of urban rail transportation vehicles. Urban. Mass. Transport. 11, 52–53 (2010)
L. Xinghua, On-line diagnosis of synchronous braking system for heavy haul combined train based on MAS. Changsha. Cent. South Univ., 2–15 (2009)
M. Wu, X.-y. Wang, T. Chun, Reliability of relay valve used in braking system of rail transportation vehicles. J. SouthWest JiaoTong Univ. 44(3), 365–369 (2009)
El K. Kadri, A. Berthon, Simulation of a dual hybrid generator for heavy vehicle application. The 32nd Annual Conference on IEEE Industrial Electronics (IECON), Paris, France, 2006, pp. 2642–2647
W. Canpei, S. Xianhai, H. Shunhao, Web based remote monitoring and control system for emergency power supply of highspeed rail train. International Conference on Transportation, Mechanical, and Electrical Engineering (TMEE), Changchun, China, 2011, pp. 694–697
M. Berger, C. Lavertu, I. Kocar, et al., Proposal of a time-domain platform for short-circuit protection analysis in rapid transportation train DC auxiliary systems. IEEE Trans. Ind. Appl. 52(6), 5295–5304 (2016)
J.D. Wu, S.Y. Liao, Fault diagnosis of an automotive air-conditioner blower using noise emission signal. Expert Syst. Appl. 37(2), 1438–1445 (2010)
Y. Dichen, J. Limin, Q. Yong, P. Wei, Y. Yang, Fault diagnosis of auxiliary inverter system of urban rail transportation based on wavelet BP neural network. Chin. J. Constr. Mach. 11(6), 542–546 (2013)
L. Gang, Fuzzy logic for battery state of technology. 1995 China Intelligent automation conference and intelligent automation professional committee proceedings proceedings (second). Tianjin, China, 1995, pp. 936–941
G. Yajun, Fault analysis of three-phase ac overvoltage monitoring for auxiliary inverter of AC02 train. Science and Technology Conference of Shanghai Metro Operation Co., Ltd., Shanghai, 2006, pp. 261–264
Y. Qiang, C. Ang-long, W. Li, T. Sheng-gui, Starting Failure Analysis and Countermeasure of Auxiliary Inverter for DCO l Type Electric Train. Shanghai Subway Operation Co., 2006, pp. 191–193
C. Xiaoliang, Analysis of emergency lighting failures of Guangzhou metro line 5 train. Urban. Mass. Transport. 14(7), 70–71, 75 (2011)
C. Huanxin, Z. Jun, W. Shanzhe, Fault diagnosis expert system for passenger car air conditioning units (2002) 1:69–72
M Chuan. Fault Feature Extraction and Application of Rolling Bearing. Dalian University of Technology, 2009, pp. 2–5
H. Weiguo, Condition Monitoring and Fault Diagnosis of Rotating Machinery Based on Feature Extraction and Expression of Vibration Signals. University of Science and Technology of China, Hefei, 2010, pp. 4–10
S. Wentao, Roller Bearing Surface Damage Fault Feature Extraction and Diagnostic Methods. Jinan, Shandong University, (2011), pp. 10–30
T. Deyao, Generalized Resonance, Resonance Demodulation Fault Diagnosis and Safety Engineering: Railway (China Railway Publishing House, Beijing, 2006), pp. 8–105
L. Yongbin, Study on Condition Monitoring and Diagnosis of Rolling Bearing Based on Nonlinear Signal Analysis (University of Science and Technology of China, Hefei, 2011), pp. 3–15
S. He, J. Lin, Zhang Bing. high speed train shaft vibrating harvester. Eng. Test. 50(1), 54–57 (2010)
S. Wanfeng, Z. Shengtang, H. Jie, Fault diagnosis of train bearing based on high order cumulant adaptive algorithm. J. Vib. Eng. 19(2), 234–237 (2006)
P. He, L. Pan, S. Huiqi, S. Nanxiang, Design of acoustic signal acquisition system for train bearace fault. Autom. Instrum. 10, 8–11 (2011)
D. Fuyan, Research on general scheme of locomotive bearing monitoring and diagnosis. Diesel. Locomot. 8, 15–17 (2006)
N.K. Nabiyev, Diagnostics of axle boxes bearings based on identification measuring method. Trans. Univ. Karaganda. State. Tech. Univ. 1, 77–79 (2010)
J. Yang, C. Guoqiang, Y. Dechen, H. Qiang, L. Jie, Fault diagnosis method for the rolling bearing of railway vehicle based on wavelet packet transform and BP neural network. China Railw. Sci. 31(6), 68–73 (2010)
W. He, X. Zhou, Application of the wavelet-SOFM network in roll bearing defect diagnosis. 2009 WRI Global Congress on Intelligent Systems (GCIS 2009), 2009, pp. 8–12
J. Yang, Z. Mingyuan, Robot bearing diagnosis system based on vehicle bus and Laplace wavelet. J. China. Railw. Soc. 33(8), 23–27 (2011)
M.-g. Yu, Z. Ji-ye, Z. Wei-hua, Analysis of crosswind safety of high-speed trains based on reliability. J. Vib. Shock. 32(20), 90–96 (2013)
Li Chao, Wang Ying. Hierarchical coupling analysis of equipment system safety based on reliability and IPPM. China. Saf. Sci. J., 2013, 8 (08)
Z.-m. Yu, Z. Hong-lun, Life-cycle safety management system of rolling stock structure based on reliability. China. Railw. Sci. 26(6), 1–5 (2005)
S. Hongsheng, C. Yulong, Z. Youpeng, Reliability evaluation of on-board subsystem of CTCS-3 train control system based on bayesian network. China. Railw. Sci. 05, 96–104 (2014)
Author information
Authors and Affiliations
Rights and permissions
Copyright information
© 2019 Springer Nature Singapore Pte Ltd.
About this chapter
Cite this chapter
Qin, Y., Jia, L. (2019). Fundamental of Rail Transportation Active Safety. In: Active Safety Methodologies of Rail Transportation. Advances in High-speed Rail Technology. Springer, Singapore. https://doi.org/10.1007/978-981-13-2260-0_1
Download citation
DOI: https://doi.org/10.1007/978-981-13-2260-0_1
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-13-2259-4
Online ISBN: 978-981-13-2260-0
eBook Packages: EngineeringEngineering (R0)