Abstract
In order to detect truck multi-brake temperature in real time, achieve hierarchical warning of high-temperature state, assist driver in completing brake behavior and ensure the safety of the truck brake, a wireless monitoring and pre-warning system of brake temperature for truck safety operation was developed. Based on MCU, milli-volt level voltage signal produced by detecting the brake temperature through PT1000 platinum thermal resistance temperature sensor was sent to LM2904 for signal amplification. Then, the amplified signal was converted to a digital signal by ADS1115 and sent to the receiver master chip and displayed through E31-TTL-50 wireless module. After comparing with the critical value, the system will carry out the hierarchical alarm. This system realized the detection and display of signal in real time and the remote monitoring. In the chapter, the design of the system in hardware and software was introduced. Furthermore, an experiment was conducted to ensure the effectiveness of the system.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Wu YQ (2014) Simulation of temperature distribution in disk brake considering a real brake pad wear. Tribol Lett 56:205–213
Kwon MH (2016) Cooperative control for friction and regenerative braking systems considering dynamic characteristic and temperature condition. Int J Automot Technol 17(3):437–446
Verma P C (2016) Role of the friction layer in the high-temperature pin-on-disc study of a brake material. Wear 56–65
Guo J (2014) Truck brake temperature monitoring and early warning system research. Jilin University, Changchun
Pengfei Yang (2010) Drum brake temperature monitoring system design based on nRF2401. Sci Technol Herald 28(18):84–88
Sun Y, He J (2017) High precision multi-channel temperature measurement system based on LabVIEW. Instrum Tech Sens 1:96–100
Zhou P (2012) Design of the temperature detection system based on STC89C52 single-chip. Mod Electron Technol 35(22):10–13
Li Y, Yang S (2017) Study on monitoring method of temperature rise of dry air-core reactor based on distributed optical fiber temperature measurement. Instrum Tech Sens 2:43–50
Wang H (2016) Friction stir welding temperature monitoring platform development. Donghua University, Shanghai
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2019 Springer Nature Singapore Pte Ltd.
About this paper
Cite this paper
Wang, F., Zhong, J., Zhang, M., Yang, C., Yang, L. (2019). Design of Wireless Monitoring and Pre-warning System of Brake Temperature for Truck Safety Operation. In: Wang, W., Bengler, K., Jiang, X. (eds) Green Intelligent Transportation Systems. GITSS 2017. Lecture Notes in Electrical Engineering, vol 503. Springer, Singapore. https://doi.org/10.1007/978-981-13-0302-9_50
Download citation
DOI: https://doi.org/10.1007/978-981-13-0302-9_50
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-13-0301-2
Online ISBN: 978-981-13-0302-9
eBook Packages: EngineeringEngineering (R0)