Zusammenfassung
Der Anteil der Mess- und Leittechnik an den Kosten eines modernen Gasturbinenkraftwerkes nimmt seit Jahren beständig zu. Betriebsmessstellen wie beispielsweise für Temperaturen, Drücke, Ventilstellungen und Durchflüsse sind für die Lebensdauer der Gasturbine vorgesehen und liefern ihre Informationen kontinuierlich an die Leittechnik. Diese stellt dann die Betriebsparameter automatisch so ein, dass jederzeit ein sicherer, zuverlässiger und umweltfreundlicher Betrieb der Gasturbinenanlage gewährleistet ist.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Literatur
Peacock, R. E.: Turbomachinery Tip Gap Aerodynamics – A Review. Proc. 9th ISABE, Athens, 1989
Sheard, A. G.; O’Donnell, S. G.; Stringfellow, J. F.: High Temperature proximity measurements in Aero and Industrial Turbomachinery. ASME 97-GT-198, 1997
Janssen, M.; Seume, J.; Zimmermann, H.: The model V84.3A shop tests: Tip clearance measurements and evaluation. ASME 94-GT-319, 1994
Mueller, A.; Sheard, A. G.; Mozumdar, S.; Johann, E.: Capacitive Measurement of Compressor and Turbine Blade Tip Casing Running Clearance. ASME 96-GT-349, 1996
Pfeifer, U.: New optical and RF-approaches for tip clearance measurement. In: Tip Timing and Tip Clearance Problems in Turbomachines. Von Karman Institute, Belgium, 2007
VDI/VDE-Richtlinie 3511 Technische Temperaturmessungen. Blätter 1–5. Berlin: Beuth 1996
Profos, P.; Pfeifer, T. (Hrsg.): Handbuch der industriellen Meßtechnik. 6. Auflage. München: Oldenbourg 1994
De Witt, D. P.; Nutter, G. D.: Theory and Practice of Radiation Thermometry. New York: John Wiley & Sons 1989
Suarez, E.: Pyrometer for Turbine Applications in the Presence of Reflection and Flame. AIAA 93-2374, 1993
Markham, J; Latvakoski, H.; Frank, S. L. F.; Luedtke, M.: Simultaneous Short and Long Wavelength Infrared Pyrometer Measurements in a Heavy Duty Gas Turbine. ASME 2001-GT-26, 2001
Pyrometry of Combustion Turbine Blades with Thermal Barrier Coating, EPRI, Palo Alto, CA, and KEMA Nederland B. V., Arnhem, Netherlands: 1004336. 2002
TA Luft: Technische Anleitung zur Reinhaltung der Luft. Köln: Carl Heymanns Verlag 2002
VDI 2066 Blatt 1 ff.: Messen von Partikeln; Staubmessungen in strömenden Gasen; Gravimetrische Bestimmung der Staubbeladung. Berlin: Beuth 2006
Staab, J.: Industrielle Gasanalyse. München: Oldenbourg 1994
Marran, D.; Kenny, P. et al.: The application of FT-IR spectroscopy to turbine engine exhaust measurement. AIAA 2000–2211, 2000
Heath, S.: A new technique for identifying synchronous resonances using tip-timing. Int. Gas Turbine & Aeroengine Congress & Exhibition, Indianapolis, IN (USA) 1999. ASME Paper 99-GT-402, 1999
McCarty, P. et al.: Noninterference technique for measurement of turbine engine compressor blade stress. J. Aircraft 19 (1982)
Rao, S. S.: Mechanical vibrations. 3. Aufl. Addison-Wesley, 1995
Regnery, D.; Gloger, M.: Selbsterregte Schwingungen von Verdichterlaufschaufeln bei Drehzahlhochfahrt. VDI-Ber. Nr. 1208. VDI-Verlag 1995, S. 193 ff
Roth, H.: Vibration measurements on turbomachine rotor blades with optical probes: ASME Gas Turbine Conf. New Orleans, LA (USA) 1980
Rozelle, P. et al.: Development and application of a blade vibration monitor. ASME PWR Bd. 7. New York, NY (USA) 1989
Schrüfer, E.: Elektrische Messtechnik. 5. Aufl. München: Hanser 1992
Srinivasan, A.: Flutter and resonant vibration characteristics of engine blades. Int. Gas Turbine & Aeroengine Congress, Orlando, FL (USA) 1997. ASME Paper 97-GT-533, 1997
Zablostsky, I.; Korostelev, Y.: Measurement of resonance vibrations of turbine blades with the ELURA device. Engl. Übersetzung aus: Energomashinostroneniye (1970) 2, S. 36–39
Krewinkel, R. et al: Validation of surface temperature measurements on a combustor line under full-load conditions using a novel thermal history paint, GT2016-56669 ASME 2016, Seoul, South Korea
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2019 Springer-Verlag GmbH Deutschland, ein Teil von Springer Nature
About this chapter
Cite this chapter
Frank, S., Lütche, J., Woditschka, F. (2019). Versuchsmesstechnik. In: Lechner, C., Seume, J. (eds) Stationäre Gasturbinen. VDI-Buch. Springer Vieweg, Berlin, Heidelberg. https://doi.org/10.1007/978-3-662-56134-8_33
Download citation
DOI: https://doi.org/10.1007/978-3-662-56134-8_33
Published:
Publisher Name: Springer Vieweg, Berlin, Heidelberg
Print ISBN: 978-3-662-56133-1
Online ISBN: 978-3-662-56134-8
eBook Packages: Computer Science and Engineering (German Language)