Zusammenfassung
Seit dem Beginn des „modernen“ Recyclings Anfang der 1980er Jahre gibt es Ansätze sowohl die Recyclingquoten als auch die Qualität und das Niveau der Produkte zu verbessern. In der Aufbereitungstechnik betrifft das vor allem die Zerkleinerungsverfahren und die Sortiertechnik. Eine andere Möglichkeit, die noch ganz am Anfang steht, ist die Entwicklung von Produkten, die mineralisches Recyclingmaterial als Rohstoffquelle nutzen.
This is a preview of subscription content, log in via an institution.
Buying options
Tax calculation will be finalised at checkout
Purchases are for personal use only
Learn about institutional subscriptionsLiteratur
Schenk, K. J.: Separating Device. Patent WO/2011/142663. PCT/NL 2011/050314. Pub. Date 17.11.2011.
Florea, M.V.A.: Secondary materials in cement-based products. Dissertation. Eindhoven University of Technology. Einhoven 2014.
Van de Wouw, P.M.F.; Florea, M.V.A.; Brouwers, H.J.H.: Processing disaster debris liberating aggregates for structural concrete. Published in: Advances in Cement and Concrete Technology in Africa. Published: 27/01/2016.
Yanagibashi, K.; Yonezawa, T.; Arakawa, K.; Yamda, M.: A new concrete recycling for coarse aggregate regeneration process. Proceedings of the International Conference “Sustainable Concrete Construction”, pp. 511–522. Dundee 2002.
Markéta Chromá, M.; Rovnaník, P.; Vořechovská, D.; Bayer, P.; Rovnaníková, P.: Concrete Rehydration after Heating to Temperatures of up to 1200 °C. XII DBMC, International Conference on Durability of Building Materials and Components. Porto 2011.
Mulder, E.; Blaakmeer, J.; Nijland, T.; Tamboer, L.: Closed Material Cycle for Concrete as a Part of an Intergrated Process for the Reuse of the Total Flow of C&D Waste. Proceedings of the International Conference “Sustainable Concrete Construction”, pp. 555–562. Dundee 2002.
Shima, H.; Tateyashiki, H.; Matsuhashi, R.; Yoshida, Y.: An Advanced Concrete Recycling Technology and its Applicability Assessment through Input-Output Analysis. Journal of Advanced Concrete Technology Vol. 3, 2015, No. 1, pp. 53–67.
Sui, Y.: Untersuchungen zu den Einflussgrößen der thermisch-mechanischen Behandlung für das Recycling von Altbeton sowie Charakterisierung der entstehenden Produkte. Dissertation. Bauhaus-Universität Weimar 2010.
Yasumichi Koshiro; Kenichi Ichise: Application of entire concrete waste reuse model to produce recycled aggregate class H. Construction and Building Materials Vol. 67, 2014, pp. 308–314.
Patent DE 195 34 232 C 2: Verfahren zur Zerkleinerung und Zertrümmerung von aus nichtmetallischen oder teilweise metallischen Bestandteilen konglomerierten Festkörpern und zur Zerkleinerung homogener nichtmetallischer Festkörper. Forschungszentrum Karlsruhe GmbH. Anmeldung am 15.09.1995, Offenlegung am 20.03.1997.
Toyohisa Fujlta; lsao Yoshimi; Atsushi Shibayama; Toshio Miyazaki; Keisuke Abe, Masashi Sato, Wan Tai Yen, Jan Svoboda: Crushing and liberation of Materials by Electrical Disintegration. European Journal of Mineral Processing and Enviromental Protection. Vol.1, 2001, No. 2, pp. 113–122.
Linß, E.; Müller, A.: High performance sonic impulses - an alternative method for processing of concrete. Int. J. Miner. Process. Vol. 74, 2004, pp. 199–208.
Linß, E.: Untersuchungen zur Leistungsschallimpulszerkleinerung für die selektive Aufbereitung von Beton. Dissertation. Bauhaus-Universität Weimar 2008.
Thome, V.: Recycling waste concrete with lightning bolts. AWE International, 2013, June, pp. 18–25.
Menard, Y.; Bru, K.; Touze, S.; Lemoign, A.; Poirier; J.E.; Ruffie, G; Bonnaudin, F.; Von Der Weid, F.: Innovative process routes for a high-quality concrete recycling. Waste Management. 2013 No.6, pp. 1561–1565.
Koji Uenishi; Hiroshi Yamachi; Keisho Yamagami, Ryo Sakamoto: Dynamic fragmentation of concrete using electric discharge impulses. Construction and Building Materials Vol. 67, 2014, pp. 170–179.
Eva Arifi; Koichi Ishimatsu; Shinya Iizasa; Takao Namihira; Hiroyuki Sakamoto; Yukio Tachi: Reduction of contaminated concrete waste by recycling aggregate with the aid of pulsed power discharge. Construction and Building Materials Vol. 67, 2014 pp. 192–196.
Dittrich, S.; Thome, V.; Seifert, S.; Höhn, A.-L.: Verwertungspotential von elektrodynamisch aufbereitetem Altbeton. www.vivis.de/phocadownload/Download/2015…/2015_MNA_631-638_Dittrich.pdf
Bru, K.; Touzé, S.; Parvaz, D.;P.: Development of an innovative process for the up-cycling of concrete waste. International HISER Conference on Advances in Recycling and Management of Construction and Demolition Waste. Delft 2017.
Akbarnezhad, A.: Microwave Assisted Production of Aggregates from Demolition Debris. Thesis. Submitted for the Degree of Doctor of Philosophy. Department of Civil Engineering National University of Singapore 2010.
Akbarnezhad, A.; Ong, K. C. G.; Zhang, M. H.; Tam, C. T.; Foo, T. W. J.: Microwave-assisted beneficiation of recycled concrete aggregates. Construction and Building Materials Vol. 25, 2011, pp. 3469–3479.
Lippiatt, N.: Investigation of fracture porosity as the basis for developing a concrete recycling process using microwave heating. Thesis. L’Universitè de Toulouse 2014.
Bru, K.; Touze, S.; Bourgeois, F.; Lippiatt, N.; Menard, Y.: Assessment of a microwave-assisted recycling process for the recovery of high-quality aggregates from concrete waste. International Journal of Mineral Processing Vol. 126, 2014, pp. 90–98.
Noguchi, T.: Advanced Technologies of Concrete Recycling in Japan. International Rilem Conference on Progress of Recycling in the Built Environment. São Paulo 2009.
Heesup Choi; Myungkwan Lim; Hyeonggil Choi; Ryoma Kitagaki; Takafumi Noguchi: Using Microwave Heating to Completely Recycle Concrete. Journal of Environmental Protection 2014, No. 5, pp. 583–596. http://dx.doi.org/10.4236/jep.2014.57060
Liebezeit, S.; Müller, A.; Leydolph, B.; Palzer,U.: Mikrowelleninduziertes Grenzflächenversagen zur Trennung von Materialverbunden. www.vivis.de/phocadownload/2016_mna/2016_MNA_465-480_Liebezeit.pdf
Liebezeit, S.; Mueller, A.; Leydolph, B.; Palzer,U.: Microwave-induced interfacial failure to enable debonding of composite materials for recycling. Sustainable Materials and Technologies. Vol. 14, 2017, pp. 29–36.
Jaecheol Ahn: Microwave dielectric heating to disassemble a modified cementitious joint. Materials and Structures 2013, No. 46, pp. 2077–2090.
Quattrone, M.; Angulo, S., C.; John, V.,M.: Energy and CO2 from high performance recycled aggregate production. Resources, Conservation and Recycling Vol. 90, 2014, pp. 21–33.
Pretz, T.; Julius, J.: Stand der Technik und Entwicklung bei der berührungslosen Sortierung von Abfällen. Österreichische Wasser- und Abfallwirtschaft, 2008, Heft 07–08, S. 105–112.
Angulo, S.C.; John, V. M.; Ulsen, C.; Kahn, H.; Mueller, A.: Optical sorting of ceramic material from mixed construction and demolition waste aggregates (in Portugisisch). Ambiente Construído 2013, No. 6, pp. 61–73.
Linß, E.: Sensorgestützte Sortierung von mineralischen Bau- und Abbruchabfällen. Fachtagung Recycling R’16. Weimar 2016.
Somayeh Lotfi: C2CA Concrete Recycling Process. From Development To Demonstration. Thesis. Technische Universiteit Delft 2016.
Riley, Ch.M.: Relation of Chemical Properties to the Bloating of Clays. Journal of Am. Ceram. Soc. Vol. 34, 1951, pp. 123–128.
White, W.A.: Lightweight aggregate from Illinois shale. Illinois Geol. Surv.Circ. No 290, 29 p, 1960.
Lampl, C.: Sekundärrohstoffe – Anforderungen und Einsatzgebiete für die Baustoffe der Zukunft. Nachhaltige Nutzung von Baurestmassen. Österreichischer Wasser- und Abfallwirtschaftsverband. Wien 2009.
Müller, A.: Bedeutung von Kornform und Korngröße für die Herstellung von Betonen und das Recycling von Baustoffen. Ibausil. 16. Internationale Baustofftagung. Tagungsbericht Band 2. Weimar 2006.
Müller, A.; Liebezeit, S.; Badstübner, A.: Verwertung von Überschusssanden als Zusatz im Beton. Steinbruch und Sandgrube 2012, H.5, S. 46–49.
Domínguez, A.; Domínguez, M.I.; Ivanova,S.; Centeno, M.A.; Odriozola, J.A.: Recycling of construction and demolition waste generated by building infrastructure for the production of glassy materials. Ceramics International Vol. 42, 2016, pp. 15217–15223.
Dondi, M.; Cappelletti, P.; D’Amore, M.; de Gennaro;R.; Graziano, S.F.; Langella, A.; Raimondo, M.; Zanelli, C.: Lightweight aggregates from waste materials: Reappraisal of expansion behavior and prediction schemes for bloating. Construction and Building Materials Vol.127, 2016, pp. 394–409.
Müller, A.: Die Herstellung von Aufbaukörnungen aus Mauerwerkbruch. Müll und Abfall 2014, Heft 11, S. 625-633.
Lim, J.; Lütkehölter, H.: Die Trümmerverwertungsanlage Frankfurt am Main. Leistungsnachweis im Ingenieurprojekt. Fachhochschule Potsdam, Januar 2015.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
Copyright information
© 2018 Springer Fachmedien Wiesbaden GmbH, ein Teil von Springer Nature
About this chapter
Cite this chapter
Müller, A. (2018). Advanced Recycling. In: Baustoffrecycling. Springer Vieweg, Wiesbaden. https://doi.org/10.1007/978-3-658-22988-7_10
Download citation
DOI: https://doi.org/10.1007/978-3-658-22988-7_10
Published:
Publisher Name: Springer Vieweg, Wiesbaden
Print ISBN: 978-3-658-22987-0
Online ISBN: 978-3-658-22988-7
eBook Packages: Computer Science and Engineering (German Language)