Abstract
In this paper an automatic bionic mechanical arm of jujube transplanter has been designed and simulated with Pro/E and ADAMS software. The device can achieve the work of clamping—sending—setting the sapling and support the sapling to guarantee it perpendicularity in setting process. Design the structure of manipulator utilizing the simulation of hand working. There is 5-DOF at the manipulator to achieve simulating. Constitute dynamics mathematical model and estimated inseminate error of bionic manipulator. The three dimensional model of the manipulator was build up and simulated by using Pro/E software. Then up build the virtual prototype and kinetics simulation in ADAMS software and chalk up the dynamics parameter curve of clamping force etc. This manipulator will establish theory and practice foundation to the cyber-identify and cyber-supervise of sapling translating.
Project Funding: Subsidized by Sinkiang Science and Technology Supporting Projects (2009zj19)
Chapter PDF
Similar content being viewed by others
Keywords
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.
References
Zhang, M., Li, S.: Optimum Planting Depth to Poplar Mechanical Afforestation in Subarid Sand, vol. (4), pp. 4–5. Jilin Forestry Science and Technology, Changchun (2004)
Dong, Q., Han, L.: Cultivation Techniques for High Yield of Jujube in Sandy. Inner Mongolia Forestry Investigation and Design, vol. (4), pp. 83–84. Forestry Survey & Design Institute, Hohhot (2008)
Li , J., Xiao, H., Hu, Z.: Kinematics Simulation of Mechanical Arm Based on ADAMS. Machine Tool & Hydraulics (8), 206–209 (2009)
Feng, S., Xie, J., Zhu, W., Ma L.Z.: The Motion Control Study of The Automatic Transplanting Robot. Machinery Design & Manufacture (3), 166–168 (2008)
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2011 IFIP International Federation for Information Processing
About this paper
Cite this paper
Sun, Y., Wang, W., Zong, W., Zhang, H. (2011). Design and Simulation for Bionic Mechanical Arm in Jujube Transplanter. In: Li, D., Liu, Y., Chen, Y. (eds) Computer and Computing Technologies in Agriculture IV. CCTA 2010. IFIP Advances in Information and Communication Technology, vol 344. Springer, Berlin, Heidelberg. https://doi.org/10.1007/978-3-642-18333-1_54
Download citation
DOI: https://doi.org/10.1007/978-3-642-18333-1_54
Publisher Name: Springer, Berlin, Heidelberg
Print ISBN: 978-3-642-18332-4
Online ISBN: 978-3-642-18333-1
eBook Packages: Computer ScienceComputer Science (R0)