Abstract
We have developed a mathematical model that takes into account walking of a reamer with indexable throw-away inserts when processing various materials. This model allows us to predict the accuracy of hole making by the tipped tool. Within the framework of the research, we plotted and calculated the material layers, which are cut by each cutting tip. We analyzed and compared the developed models of the cut layers and the mathematical model. The obtained data allow us to divide the material into two types according to its ability to be processed with a tipped tool. Shaping diagrams of cut material layers were plotted and the existed shaping diagrams of the reamer with indexable throw-away inserts were analyzed. The calculations and comparisons allowed us to conclude that the mathematical model is consistent and can be applied in production units at machine-building enterprises.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Deryabin IP, Khilkevich YaM (2003) Modeling of hole making for the formation of new knowledge bases in intelligence systems. In: 29th international conference on metalworking: proceedings. Technion, Haifa (Israel), 12 p
Deryabin IP (2008) Designing, debugging and diagnostics of technological processes in the cam. J Mech Eng, No. 1, 43 p
Deryabin IP, Kozlov AV (2006) Study of the processes of hole making by measuring instruments: Monograph. Publ. SUSU, Chelyabinsk, 251/180 p
Deryabin IP, Guzeev VI (2006) Prediction of accuracy parameters for hole making. Technol Mech Eng, No. 4 (46), 6 p
Deryabin IP, Kozharina OA (2012) Methods for increasing the accuracy of hole axes in multi-transversal CNC machining. Technol Mech Eng 6:12–15
Deryabin IP, Chaburkina AS (2013) Application of parametric methods for designing technological processes of making deep holes. Bull Magnitogorsk State Tech Univ 3:74–77
Deryabin IP, Golovachev SYu (2014) Specifics of hole making by drills with indexable throw-away inserts. Bull Ufa State Aviat Tech Univ 18, 2(63):36–40
Pimenov DYu, Guzeev VI, Koshin AA (2011) Determination of forces acting on the back flank of the cutting tool tip. Fundam Appl Probl Tech Technol 2–2(286):80–90
Guzeev VI (2003) Specifics of determining the cutting models for multi-transitive processing. Bull South Ural State Univ Ser Mech Eng 4:112
Guzeev VI, Pimenov DY (2017) Mathematical model of plowing forces to account for flank wear using FME modeling for orthogonal cutting scheme. Int J Adv Manuf Thechnol 89(9–12):3149–3159
Guzeev VI, Batuev VA, Surkov IV (2005) Cutting models for turning and drilling-milling-boring machines with CNC. Reference Book, Moscow
Guzeev VI, Batuev VA, Surkov IV (2007) Cutting models for turning and drilling-milling-boring machines with CNC, 2nd edn. Reference Book, Moscow
Deryabin IP (2008) Information and reference base of hole making errors for technological design. Eng J, No. 9, 7 p (Reference Book)
Deryabin IP (2012) Methods for parametric design of technological processes. Eng J 6:16–21 (Reference Book)
Deryabin IP, Guzeev VI (2012) Methods for developing intelligence systems in process engineering. High Technol Eng Ind 12:36–44
Deryabin IP, Tokarev AS (2016) Study of the prosses of reaming allowances with indexable throw-away inserts when processing solid materials. Int Sci Res J 1213(54):77–83
Deryabin IP, Tokarev AS (2017) Measurement of error in the arrangement of indexable throw-away reamer inserts. Fundamental and applied research: issues and results of the article. In: Proceeding of the international scientific research conference, pp 72–74
Guzeev VI (2013) Improving productivity of multi-tool cutting with turning semiautomatic CNC machines. High Technol Eng 12(30):34–40
Guzeev VI, Pimenov DYu, Koshin AA, Pashnyov VA (2014) Application of modal analysis in the study of dynamical characteristics of a CNC-processing block. STIN 7:21–25
Guzeev VI (2014) Improving the efficiency of integrated technological processes at the design and implementation stages. Sci Intensiv Technol Mech Eng 7(37):36–41
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2019 Springer Nature Switzerland AG
About this paper
Cite this paper
Deryabin, I.P., Tokarev, A.S. (2019). Specifics of Reaming Allowances of Different Materials with Indexable Throw-Away Inserts. In: Radionov, A., Kravchenko, O., Guzeev, V., Rozhdestvenskiy, Y. (eds) Proceedings of the 4th International Conference on Industrial Engineering. ICIE 2018. Lecture Notes in Mechanical Engineering. Springer, Cham. https://doi.org/10.1007/978-3-319-95630-5_157
Download citation
DOI: https://doi.org/10.1007/978-3-319-95630-5_157
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-95629-9
Online ISBN: 978-3-319-95630-5
eBook Packages: EngineeringEngineering (R0)