Abstract
The microstructure, martensitic transformation behavior and mechanical properties of the Ti44Ni47Nb9 electron beam welding joints were systemically studied in this research. The results showed that the microstructure of the fusion zone was composed of equiaxed grains with a small quantity of eutectic structure around the grain boundaries, and the grain size in the fusion zone was smaller than that in the as-cast microstructure. The ultimate tensile strength was a little lower than that of the base. The dissolution of niobium in the matrix obstructed the martensite transformation and decreased the martensite start temperature (Ms). After being deformed at the low temperature, the welding joints exhibited good wide transformation hysteresis, which was similar to that of the base metal.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Xu ZY, Jiang BH (2000) Shape memory materials, Shanghai Jiao Tong Press
Wang L, Yan DS, Jiang ZM, Rong LJ (2004) Research and development of Ti–Ni–Nb shape memory alloy pipe-joint with wide hysteresis. J Mat Eng 7:60–63
Zhao LC, Duerig TW, Justi S et al (1990) The study of Niobium-rich precipitates in a Ni–Ti–Nb shape memory alloy. Scr Metall Mater 24:221–226
Jiang HC, Chen Y et al (2014) Effect of Mo addition on the microstructure and properties of TiNiNb alloy. Acta Metall Sin 27(2):217–222
He XM, Rong LJ, Yan DS, Li YY (2006) Deformation dependence of transformation behavior of Ti–Ni–Nb wide hysteresis shape memory alloy. Rare Metal Mat Eng 35(9):227–231
Cao YH (2000) The development of shape memory alloys and applications in the fields of the missile and aerospace. Winged Missiles J 10:60–63
Moochul S (2012) Seismic retrofit and repair of reinforced concrete bridge columns using shape memory alloy spirals, Urbana, Illinois
Chen W, Li YL, Cai W et al (2005) Applications of Ti–Ni–Nb shape memory alloy tube coupling in the armored vehicles. Mech Eng 5:18–21
Wu Y, Meng XL et al (2005) Microstructure and mechanical behaviors of TiNiNb wide hysteresis shape memory alloy wire argon arc welding joint. Mater Sci Technol 13(3):312–319
Han LJ, Zhao XH, Zhao L, Zhang F (1999) Analysis of welding parameters of precise pulse resistance butt welding on TiNiNb shape memory alloys. Mater Sci Technol 7:76–79
Chen G, Zhao XK et al (2008) Microstructure and properties of laser welded joint of TiNiNb wide hysteresis shape memory alloy. Hot Work Technol 37(17):99–101
Liu M, Li YY et al (1997) Influence of precipitates on the two way shape memory effect. Acta Metall Sin 10(3):166–173
Lu WW, Chen YH et al (2014) Research progress of engineering application and welding technology of new type shape memory alloy of TiNiNb. Aeronaut Manuf Technol (1/2): 94–97
Yang D, Jiang HC, Zhao MJ, Rong LJ (2014) Microstructure and mechanical behaviors of electron beam welded NiTi shape memory alloys. Mater Des 57:21–25
Acknowledgements
The authors gratefully acknowledge the financial support for this research provided by the National Natural Science Foundation of China (Grant No. 51001100).
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2018 The Minerals, Metals & Materials Society
About this paper
Cite this paper
Yang, D., Jiang, H., Zhao, M., Rong, L. (2018). Microstructure and Mechanical Behaviors of Electron Beam Welded Ti44Ni47Nb9 Shape Memory Alloys. In: Stebner, A., Olson, G. (eds) Proceedings of the International Conference on Martensitic Transformations: Chicago. The Minerals, Metals & Materials Series. Springer, Cham. https://doi.org/10.1007/978-3-319-76968-4_35
Download citation
DOI: https://doi.org/10.1007/978-3-319-76968-4_35
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-76967-7
Online ISBN: 978-3-319-76968-4
eBook Packages: Chemistry and Materials ScienceChemistry and Material Science (R0)