Abstract
This chapter introduces the basic concept of the Capacity Design. The ordered steps to be followed in the seismic design of buildings are summarized according to the European standards.
Keywords
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
1998-1 E (2004) Design of structures for earthquake resistance Part 1: general rules, seismic actions and rules for buildings. European Committee for Standardization
Committee A, Institute AC, for Standardization IO (2008) Building code requirements for structural concrete (ACI 318-08) and commentary. American Concrete Institute
George SS, Varghese V (2012) General concepts of capacity based design. Int J Innov Technol Explor Eng (IJITEE) 1(2):211–215. ISSN:2278–3075
Liu J (2013) Seismic behaviour of reinforced concrete columns. Ph.D thesis
Mander JB, Priestley MJ, Park R (1988) Theoretical stress-strain model for confined concrete. J Struct Eng 114(8):1804–1826
NTC-08 (2008) Nuove Norme Tecniche per le Costruzioni. Gazzetta Ufficiale della Repubblica Italiana
NZS (2006) 3101. Code of practice and commentary for the design of concrete structures NZS-3101 82
Park R, Paulay T (1975) Reinforced concrete structures. Wiley, New York
Paulay T, Priestley MN (1992) Seismic design of reinforced concrete and masonry buildings. Wiley, New York
Paulay T, Park R, Preistley M (1978) Reinforced concrete beam-column joints under seismic actions. ACI J Proc 75:585–593
Uma S, Jain SK (2006) Seismic design of beam-column joints in RC moment resisting frames-review of codes. Struct Eng Mech 23(5):579
Author information
Authors and Affiliations
Rights and permissions
Copyright information
© 2018 Springer International Publishing AG, part of Springer Nature
About this chapter
Cite this chapter
Cimellaro, G.P., Marasco, S. (2018). Capacity Design. In: Introduction to Dynamics of Structures and Earthquake Engineering. Geotechnical, Geological and Earthquake Engineering, vol 45. Springer, Cham. https://doi.org/10.1007/978-3-319-72541-3_15
Download citation
DOI: https://doi.org/10.1007/978-3-319-72541-3_15
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-72540-6
Online ISBN: 978-3-319-72541-3
eBook Packages: Earth and Environmental ScienceEarth and Environmental Science (R0)