Abstract
There is an increasing requirement from both academia and industry for high-fidelity flow simulations that are able to accurately capture complicated and transient flow dynamics in complex geometries. Coupled with the growing availability of high-performance, highly parallel computing resources, there is therefore a demand for scalable numerical methods and corresponding software frameworks which can deliver the next-generation of complex and detailed fluid simulations to scientists and engineers in an efficient way. In this article we discuss recent and upcoming advances in the use of the spectral/hp element method for addressing these modelling challenges. To use these methods efficiently for such applications, is critical that computational resolution is placed in the regions of the flow where it is needed most, which is often not known a priori. We propose the use of spatially and temporally varying polynomial order, coupled with appropriate error estimators, as key requirements in permitting these methods to achieve computationally efficient high-fidelity solutions to complex flow problems in the fluid dynamics community.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
C. Cantwell, S. Sherwin, R. Kirby, P. Kelly, From h to p efficiently: strategy selection for operator evaluation on hexahedral and tetrahedral elements. Comput. Fluids 43(1), 23–28 (2011)
C.D. Cantwell, S.J. Sherwin, R.M. Kirby, P.H.J. Kelly, From h to p efficiently: selecting the optimal spectral/hp discretisation in three dimensions. Math. Mod. Nat. Phenom. 6, 84–96 (2011)
C.D. Cantwell, D. Moxey, A. Comerford, A. Bolis, G. Rocco, G. Mengaldo, D. de Grazia, S. Yakovlev, J.E. Lombard, D. Ekelschot, B. Jordi, H. Xu, Y. Mohamied, C. Eskilsson, B. Nelson, P. Vos, C. Biotto, R.M. Kirby, S.J. Sherwin, Nektar++: an open-source spectral/hp element framework. Comput. Phys. Commun. 192, 205–219 (2015)
L. Demkowicz, W. Rachowicz, P. Devloo, A fully automatic hp-adaptivity. J. Sci. Comput. 17(1), 117–142 (2002)
D. Ekelschot, D. Moxey, S.J. Sherwin, J. Peiró, A p-adaptation method for compressible flow problems using a goal-based error estimator. Comput. Struct. 181, 55–69 (2017)
E. Ferrer, D. Moxey, S.J. Sherwin, R.H.J. Willden, Stability of projection methods for incompressible flows using high order pressure-velocity pairs of same degree: continuous and discontinuous Galerkin formulations. Commun. Comput. Phys. 16(3), 817–840 (2014)
K.J. Fidkowski, D.L. Darmofal, Review of output-based error estimation and mesh adaptation in computational fluid dynamics. AIAA J. 49(4), 673–694 (2011)
G. Giorgiani, S. Fernández-Méndez, A. Huerta, Goal-oriented hp-adaptivity for elliptic problems. Int. J. Numer. Methods Fluids 72(1), 1244–1262 (2013)
D. de Grazia, G. Mengaldo, D. Moxey, P. Vincent, S.J. Sherwin, Connections between the discontinuous Galerkin method and high-order flux reconstruction schemes. Int. J. Numer. Methods Fluids 75(12), 860–877 (2014)
H.T. Huynh, A flux reconstruction approach to high-order schemes including discontinuous Galerkin methods, in: 18th AIAA Computational Fluid Dynamics Conference, p. 4079 (2007)
G. Karniadakis, S. Sherwin, Spectral∕hp Element Methods for Computational Fluid Dynamics, 2nd edn. (Oxford University Press, Oxford, 2005)
G.E. Karniadakis, Spectral element-Fourier methods for incompressible turbulent flows. Comput. Methods Appl. Mech. Eng. 80(1–3), 367–380 (1990)
G.E. Karniadakis, M. Israeli, S.A. Orszag, High-order splitting methods for the incompressible Navier-Stokes equations. J. Comput. Phys. 97(2), 414–443 (1991)
L.Y. Li, Y. Allaneau, A. Jameson, Comparison of h- and p-adaptations for spectral difference methods, in: 40th AIAA Fluid Dynamics Conference and Exhibit (2010)
J.E.W. Lombard, D. Moxey, S.J. Sherwin, J.F.A. Hoessler, S. Dhandapani, M.J. Taylor, Implicit large-eddy simulation of a wingtip vortex. AIAA J. 54(2), 506–518 (2016)
G. Markall, A. Slemmer, D. Ham, P. Kelly, C. Cantwell, S. Sherwin, Finite element assembly strategies on multi-core and many-core architectures. Int. J. Numer. Methods Fluids 71(1), 80–97 (2013)
G. Mengaldo, D. de Grazia, D. Moxey, P.E. Vincent, S.J. Sherwin, Dealiasing techniques for high-order spectral element methods on regular and irregular grids. J. Comput. Phys. 299, 56–81 (2015)
G. Mengaldo, D. de Grazia, P.E. Vincent, S.J. Sherwin, On the connections between discontinuous Galerkin and flux reconstruction schemes: extension to curvilinear meshes. J. Sci. Comput. 67(3), 1272–1292 (2016)
R.C. Moura, G. Mengaldo, J. Peiró, S.J. Sherwin, On the eddy-resolving capability of high-order discontinuous Galerkin approaches to implicit LES/under-resolved DNS of Euler turbulence. J. Comput. Phys. 330, 615–623 (2017)
D. Moxey, M.D. Green, S.J. Sherwin, J. Peiró, An isoparametric approach to high-order curvilinear boundary-layer meshing. Comput. Methods Appl. Mech. Eng. 283, 636–650 (2015)
D. Moxey, C.D. Cantwell, R.M. Kirby, S.J. Sherwin, Optimizing the performance of the spectral/hp element method with collective linear algebra operations. Comput. Methods Appl. Mech. Eng. 310, 628–645 (2016)
D. Moxey, D. Ekelschot, Ü. Keskin, S.J. Sherwin, J. Peiró, High-order curvilinear meshing using a thermo-elastic analogy. Comput. Aided Des. 72, 130–139 (2016)
P.O. Persson, J. Peraire, Sub-cell shock capturing for discontinuous Galerkin methods. AIAA paper 112 (2006)
P. SolÃn, L. Demkowicz, Goal-oriented hp-adaptivity for elliptic problems. Comput. Methods Appl. Mech. Eng. 193(1), 449–468 (2004)
P.E. Vincent, P. Castonguay, A. Jameson, A new class of high-order energy stable flux reconstruction schemes. J. Sci. Comput. 47(1), 50–72 (2011)
P.E. Vos, S.J. Sherwin, R.M. Kirby, From h to p efficiently: implementing finite and spectral/hp element methods to achieve optimal performance for low- and high-order discretisations. J. Comput. Phys. 229(13), 5161–5181 (2010)
S. Yakovlev, D. Moxey, S.J. Sherwin, R.M. Kirby, To CG or to HDG: a comparative study in 3D. J. Sci. Comput. 67(1), 192–220 (2016)
Acknowledgements
D.M. acknowledges support from the EU Horizon 2020 project ExaFLOW (grant 671571) and the PRISM project under EPSRC grant EP/L000407/1. D.S. is grateful for the support received from CNPq (grant 231787/2013–8) and FAPESP (grant 2012/23493-0). D.E. acknowledges support from the EU ITN project ANADE (grant PITN-GA-289428). S.J.S. acknowledges Royal Academy of Engineering support under their research chair scheme. R.M.K. acknowledges support from the US Army Research Office under W911NF1510222 (overseen by Dr. M. Coyle). Computing resources supported by the UK Turbulence Consortium (EPSRC grant EP/L000261/1) and the Imperial College HPC service.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2017 Springer International Publishing AG
About this paper
Cite this paper
Moxey, D. et al. (2017). Towards p-Adaptive Spectral/hp Element Methods for Modelling Industrial Flows. In: Bittencourt, M., Dumont, N., Hesthaven, J. (eds) Spectral and High Order Methods for Partial Differential Equations ICOSAHOM 2016. Lecture Notes in Computational Science and Engineering, vol 119. Springer, Cham. https://doi.org/10.1007/978-3-319-65870-4_4
Download citation
DOI: https://doi.org/10.1007/978-3-319-65870-4_4
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-65869-8
Online ISBN: 978-3-319-65870-4
eBook Packages: Mathematics and StatisticsMathematics and Statistics (R0)