Abstract
Most of steering problems were related with a pitman arm and a steering joint. For these parts, using the example of two buses the bending stress and safety margin were determined with the help of virtual 3D models. A dangerous section and maximum loads were determined, the calculation of bending under static loading was carried out. The proposals were drafted that aimed at improving the operational reliability of the steering. The problem of road safety was one of the most significant in modern conditions. An important contribution in safety was made by the reliability of vehicles, which, in turn, was associated with the development of their design, and also the technical condition. An especially important thing was to ensure the reliability of vehicles that carry passengers.
This is a preview of subscription content, log in via an institution.
Buying options
Tax calculation will be finalised at checkout
Purchases are for personal use only
Learn about institutional subscriptionsReferences
Lysov MI (1972) Car steering. Engineering, Moscow, p 344
Narbut AN (2007) Cars: workflows and payment mechanisms and systems: a textbook for students. Executive Procedure Institutions. Publishing Center “Academy”, Moscow, 256 p
Klepik NK (1995) Statistical treatment of experimental problems in the road transport. In: Procedures manual. Volgograd State Technical University, Volgograd, 95 p
Standart 52302-2004 (2005) Vehicles. Handling and stability. Publishing House of Standards, Moscow, 27 p
Bukharin NA, Prozorov VS, Schukin MM (1973) Cars. Design load conditions, workflows, strength units of the automobile. In: Procedures manual for schools. Engineering, Leningrad, 504 p
Badikov KA, Tyshkevich VN, Chernova GA (2013) Calculation of endurance ball stud steering bus “Volzhanin-32901”. Mod Probl Russ Transp Complex 4(4):172–177
Pavlyuk AS, Safronov S (2013) Influence of design parameters of the steering gear to the steering mobile machine. Polzunovsky Gaz 4(3):181–184
Standard 23207-08 (194) System maintenance and repair of equipment. Selecting and setting parameters maintainability. General requirements. Publishing House of Standards, Moscow, 17 p
Habardin AV, Habardin VN, Kuzmin AE, Chubareva MV, Gorbunov TL (2011) Free wheeling steering wheel as a parameter of a technical condition of a steering. Bull Irkutsk State Agric Acad 43:154–160
Chernova GA, Badikov KA, Tyshkevich VN (2014) Evaluation of the strength of the ball joint steering bus. Problems of technical operation and service centers of the rolling stock of automobile vehicles: Sat. scientific. tr.: Based on the materials. In: 72th scientific-method. and scientific-issled. Conference MADI, Moscow State Automobile and Road. Technical University (MADI), pp 98–102
Larry J (1976) Segerlind: applied finite element analysis, pp 232–239
Chernova GA, Tyshkevich VN, Badikov KA, Moseec Yu, Zabolotnyi RV (2014) Evaluation of the strength of steering control bus. In: Proceedings VSTU. A series of “Land transport systems.” vol 8: Hi. Sat. scientific. Art 3(130):47–50
Standard 23207-78 (1981) Fatigue resistance. Basic terms, definitions and symbols. Publishing House of Standards, Moscow, 49 p
Zaslavsky BV (1986) Short Course materials resistance. Tutorial for aviation specialties. Engineering, Moscow, p 328
Migal VD (2013) Technical diagnostics of cars: a handbook in 6 volumes, vol 1, Manufacturing defects and operational faults, 2nd edn, Sr. OOO “CPI” Mask, Moscow, 373 p
Migal VD (2013) Technical diagnostics of cars: a handbook in 6 volumes, vol 3. Methods of diagnosing, 2nd edn, Sr. OOO “CPI” Mask, Moscow, 548 p
Vernyaev MA, Filkin NM, Shakurov DC (2012) Calculations ball joint suspension of the car. Russian forests and farming in them 1–2(42–43):22–23
Abaimov RV (2007) Diagnosis of road transport: Sat. Descriptions of the laboratory. Papers to prepare graduates/comp.; SSI, Syktyvkar, 60 p
Menshenin GG (2006) Plastic bags PA workshop on reliability theory and diagnosis part II. In: Procedures manual. VSTU, Volgograd, 230 p
Terentiev VF (2002) Fatigue strength of metal alloys. Internet Eng, Moscow, p 288
Chernova GA, Tyshkevich VN, Badikov KA, Moiseev YuI, Zabolotniy RV (2014) Estimation of operation capability of the ball pin of the “Volzhanin-32901” bus with relation to fatigue strength. J Mach Manuf Reliab 43(4):294–297
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2020 Springer Nature Switzerland AG
About this paper
Cite this paper
Savkin, A.N., Badikov, K.A., Sedov, A.A. (2020). Reliability Analysis of Bus Steering System. In: Radionov, A., Kravchenko, O., Guzeev, V., Rozhdestvenskiy, Y. (eds) Proceedings of the 5th International Conference on Industrial Engineering (ICIE 2019). ICIE 2019. Lecture Notes in Mechanical Engineering. Springer, Cham. https://doi.org/10.1007/978-3-030-22063-1_74
Download citation
DOI: https://doi.org/10.1007/978-3-030-22063-1_74
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-22062-4
Online ISBN: 978-3-030-22063-1
eBook Packages: EngineeringEngineering (R0)