Abstract
Solar-powered systems can supply clean and sustainable energy for both service requirements and also for the propulsion of marine vessels. However, the restricted available area for photovoltaic panels and high setup costs inhibits the sufficient energy production for satisfying the whole needs of vessels. Due to the limited panel area that can be installed on the vessel, it is necessary to improve the system efficiency in order to obtain more power from the existing solar panel system. In this study, cooling solar panels from the back surface with seawater in an open loop cooling water circuit for a 527-W solar-powered system are investigated. In order to observe the effects of cooling the panels, thermodynamic modeling and analysis of a foldable photovoltaic panel set have been carried out. The result illustrates the potential of these systems as the power output difference of the panel set is more than the consumed power for cooling on above-specific irradiation conditions. The remaining power output, which would be up to 37% of the uncooled system, is high enough to be utilized to speed up the marine vessels or to increase their range.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
NREL (2018) PV research cell record efficiency chart. https://www.nrel.gov/pv/assets/pdfs/pv-efficiency-chart.20181221.pdf. Accessed on 22 Apr 2019
Meral ME, Dinçer F (2011) A review of factors affecting operation and efficiency of photovoltaic based electricity generation systems. Renew Sustain Energy Rev 15:2116–2186
Tiwari A, Sodha MS (2006) Performance evaluation of hybrid PV/thermal water/air heating system: a parametric study. Renew Energy 31(2006):2460–2474
Odeh S, Behnia M (2009) Improving photovoltaic module efficiency using water cooling. Heat Transfer Eng 30(6):499–505
Du B, Hu E, Kolhe M (2012) Performance analysis of water cooled concentrated photovoltaic (CPV) system. Renew Sustain Energy Rev 16(9):6732–6736
Teo HG, Lee PS, Hawlader MNA (2012) An active cooling system for photovoltaic modules. Appl Energy 90(1):309–315
Bahaidarah H, Subhan A, Gandhidasan P, Rehman S (2013) Performance evaluation of a PV (photovoltaic) module by back surface water cooling for hot climatic conditions. Energy 59:445–453
Moharram KA, Abd-Elhady MS, Kandil HA, El-Sherif H (2013) Enhancing the performance of photovoltaic panels by water cooling. Ain Shams Eng J 4(4):869–877
Baloch AA, Bahaidarah HM, Gandhidasan P, Al-Sulaiman FA (2015) Experimental and numerical performance analysis of a converging channel heat exchanger for PV cooling. Energy Convers Manage 103:14–27
Popovici CG, Hudişteanu SV, Mateescu TD, Cherecheş NC (2016) Efficiency improvement of photovoltaic panels by using air cooled heat sinks. Energy Procedia 85:425–432
Kane A, Verma V, Singh B (2017) Optimization of thermoelectric cooling technology for an active cooling of photovoltaic panel. Renew Sustain Energy Rev 75:1295–1305
Schiro F, Benato A, Stoppato A, Destro N (2017) Improving photovoltaics efficiency by water cooling: modelling and experimental approach. Energy 137:798–810
Bashir MA, Ali HM, Amber KP, Bashir MW, Ali H, Imran S, Kamran MS (2018) Performance investigation of photovoltaic modules by back surface water cooling. Therm Sci 22(6)
Salem MR, Elsayed MM, Abd-Elaziz AA, Elshazly KM (2019) Performance enhancement of the photovoltaic cells using Al2O3/PCM mixture and/or water cooling-techniques. Renew Energy 138:876–890
Ahmed MS, Mohamed ASA, Maghrabie HM (2019) Performance evaluation of combined photovoltaic thermal water cooling system for hot climate regions. J Sol Energy Eng 141(4):041010
Konur O, Erginer E (2016) Effect of sea water cooling systems to the energy efficiency of solar panels on marine vessels. In: GMC 2016 conference proceedings book
Enteria N, Akbarzadeh A (2014) Solar energy sciences and engineering applications. CRC Press, Boca Raton
Sunpower Corp. (2017) https://us.sunpower.com/sites/sunpower/files/media-library/spec-sheets/sp-sunpower-maxeon-solar-cells-gen3.pdf. Accessed on 8 Feb 2018
Chemours (2017) https://www.chemours.com/Teflon_Industrial/en_US/assets/downloads/teflon-fep-film-properties.pdf. Accessed on 5 Feb 2018
Haynes W (2013) CRC handbook of chemistry and physics, 94th edn. CRC Press, Boca Raton
Klouda P (2004) Thermally conductive printed circuit board materials. www.ewh.ieee.org/soc/cpmt/presentations/cpmt0412b.pdf. Accessed on 5 Feb 2018
Redrok Energy (2017) http://www.redrok.com/concept.htm#emissivity. Accessed on 27 Jan 2018
Adam J (2002) PCB modelling refresher. http://webparts.mentor.com/flotherm/support/supp/mm/pcb_modelling/. Accessed on 27 Jan 2018
Bilgen E (2013) Intersol eighty five: proceedings of the ninth biennial congress of the international solar energy society, vol 1. Elsevier, Amsterdam
Khabari A, Zenouzi M, O’Connor T, Rodas A (2014) Natural and forced convective heat transfer analysis of nanostructured surface. In: Proceedings of the world congress on engineering 2014, vol I, London, UK
Çengel Y, Ghajar AJ (2015) Heat and mass transfer, 5th edn. McGraw-Hill Education, New York
Duffie JA, Beckman WA (2013) Solar engineering of thermal processes, 4th edn. Wiley, London
Marinetech (2018) http://www.tekneyataksesuarlari.com/24V-UP2-P-Tatli-ve-Tuzlu-Su-Transfer-Pompasi-Pervaneli,PR-1396.html. Accessed on 20 Feb 2018
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2020 Springer Nature Switzerland AG
About this paper
Cite this paper
Konur, O. et al. (2020). Thermodynamic Modeling of a Seawater-Cooled Foldable PV Panel System. In: Dincer, I., Colpan, C., Ezan, M. (eds) Environmentally-Benign Energy Solutions. Green Energy and Technology. Springer, Cham. https://doi.org/10.1007/978-3-030-20637-6_14
Download citation
DOI: https://doi.org/10.1007/978-3-030-20637-6_14
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-20636-9
Online ISBN: 978-3-030-20637-6
eBook Packages: EnergyEnergy (R0)