Abstract
Materials play a huge role in the development of human lifestyle at all ages. By the emergence of nanomaterials, a new field of science and technology was born, known as “nanoscience and nanotechnology.” This is mainly because of the peculiar characteristics of the nanomaterials that are applied in modern science and technology. Nowadays there are mainly two major global threats, namely, (i) energy and (ii) environment cleanliness. Most of the energy used these days are from fossil fuels, and this energy is running out, and therefore there is a huge hunt for new sources of energy; mostly they are renewable energy and that should be environment-friendly. Energy generation and storage are big challenges and can be done via solar cells, fuel cells, and batteries. The next issue of environmental pollution is mainly from the enormously developing industries. Most of these industries discharge effluents (mainly from textile and tanning industries) into the mainstream water bodies, leading to a polluted water for supply. This particular issue, depending on the type of chemicals/dyes/organics that it contains, is very harmful to the living things, including human beings. The level of danger can go to the extent of inducing cancer. These effluents have to be treated properly and converted into harmless products (such as water, CO2, etc.) before letting them into water. Process like advanced oxidation process assisted by photocatalyst can be a good solution for cleaning the industrial wastes. Ability of the photocatalyst with appropriate characteristics is very crucial for this particular application. Another category of threat to environment is the corrosion caused by the electrochemical reactions when the metal/structure interacts with their surroundings. What is more importantly required to meet out the energy and environment issues is to develop better performing materials that can improve the working efficiency of solar cells, batteries, and photocatalysts for photocatalysis. Boon for this is the blooming of “nanomaterials” that come with improved properties compared to their bulk counterpart. Development of nanomaterials is enormous in all these fields of applications. In this aspect, this chapter describes the applications of nanomaterials in the fields of energy (solar cells, batteries, and fuel cells) and environment issues (gas sensing, photocatalysts in photocatalysis, and corrosion). The emergence of these nanomaterials for these applications is discussed in this chapter.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Abdalla AM, Hossain S, Azad AT, Petra PM, Begum F, Eriksson SG, Azad AK (2018) Nanomaterials for solid oxide fuel cells: a review. Renew Sust Energ Rev 82:353–368. https://doi.org/10.1016/j.rser.2017.09.046
Akyildiz IF, Su W, Sankarasubramaniam Y, Cayirci E (2002) A survey on sensor networks. IEEE Commun Mag 40:102–114. https://doi.org/10.1109/MCOM.2002.1024422
Ambat R, Aung NN, Zhou W (2000) Evaluation of microstructural effects on corrosion behaviour of AZ91D magnesium alloy. Corros Sci 42:1433–1455. https://doi.org/10.1016/S0010-938X(99)00143-2
Amine K, Belharouak I, Chen Z, Tran T, Yumoto H, Ota N, Myung S, Sun Y (2010) Nanostructured anode material for high-power battery system in electric vehicles. Adv Mater 22:3052–3057. https://doi.org/10.1002/adma.201000441
Amutha A, Amirthapandian S, Prasad AK, Panigrahi BK, Thangadurai P (2015) Methane gas sensing at relatively low operating temperature by hydrothermally prepared SnO2 nanorods. J Nanopart Res 17:289. https://doi.org/10.1007/s11051-015-3089-z
Amutha A, Amirthapandian S, Sundaravel B, Prasad AK, Panigrahi BK, Thangadurai P (2016) Structural and gas sensing properties of ex-situ oxidized Sn grown by thermal evaporation. Appl Surf Sci 360:731–737. https://doi.org/10.1016/j.apsusc.2015.11.054
Ansari F, Naderi R, Dehghanian C (2015) Improvement in the corrosion resistance of stainless steel 304L in sodium chloride solution by a nanoclay incorporated silane coating. RSC Adv 5:706–716. https://doi.org/10.1039/C4RA10332G
Antolini E (2010) Composite materials: an emerging class of fuel cell catalyst supports. Appl Catal B Environ 100:413–426
Atrens A, Song G-L, Liu M, Shi Z, Cao F, Dargusch MS (2015) Review of recent developments in the field of magnesium corrosion. Adv Eng Mater 17:400–453. https://doi.org/10.1002/adem.201400434
Ayekoe CYP, Robert D, Lanciné DG (2017) Combination of coagulation-flocculation and heterogeneous photocatalysis for improving the removal of humic substances in real treated water from Agbô River (Ivory-Coast). Catal Today 281:2–13. https://doi.org/10.1016/j.cattod.2016.09.024
Babaei A, Zhang L, Liu E, Jiang SP (2012) Performance and carbon deposition over Pd nanoparticle catalyst promoted Ni/GDC anode of SOFCs in methane, methanol and ethanol fuels. Int J Hydrog Energy 37:15301–15310. https://doi.org/10.1016/j.ijhydene.2012.07.089
Bai J, Zhou B (2014) Titanium dioxide nanomaterials for sensor applications. Chem Rev 114:10131–10176. https://doi.org/10.1021/cr400625j
Ball JM, Lee MM, Hey A, Snaith HJ (2013) Low-temperature processed meso-superstructured to thin-film perovskite solar cells. Energy Environ Sci 6:1739–1743. https://doi.org/10.1039/c3ee40810h
Beura R, Thangadurai P (2017) Structural, optical and photocatalytic properties of graphene-ZnO nanocomposites for varied compositions. J Phys Chem Solids 102:168–177. https://doi.org/10.1016/j.jpcs.2016.11.024
Beura R, Pachaiappan R, Thangadurai P (2018) A detailed study on Sn4+ doped ZnO for enhanced photocatalytic degradation. Appl Surf Sci 433:887–898. https://doi.org/10.1016/j.apsusc.2017.10.127
BinSabt M, Nazeer AA, Madkour M, Al-Sagheer F (2016) Hydrothermally modified PVA/ZnS-NCQD nanocoating for stainless steel corrosion protection in saline water. RSC Adv 6:6888–6895. https://doi.org/10.1039/C5RA26581A
Birkel A, Lee Y-G, Koll D, Meerbeek XV, Frank S, Choi MJ, Kang YS, Char K, Tremel W (2012) Highly efficient and stable dye-sensitized solar cells based on SnO2 nanocrystals prepared by microwave-assisted synthesis. Energy Environ Sci 5:5392–5400. https://doi.org/10.1039/C1EE02115J
Boro B, Gogoi B, Rajbongshi BM, Ramchiary A (2018) Nano-structured TiO2/ZnO nanocomposite for dye-sensitized solar cells application: a review. Renew Sust Energ Rev 81:2264–2270
Brennan TP, Tanskanen JT, Roelofs KE, To JW, Nguyen WH, Bakke JR, Ding I, Hardin BE, Sellinger A, McGehee MD, Bent SF (2013) TiO2 conduction band modulation with In2O3 recombination barrier layers in solid-state dye-sensitized solar cells. J Phys Chem C 117:24138–24149. https://doi.org/10.1021/jp406789k
Bush KA, Palmstrom AF, Yu ZJ, Boccard M, Cheacharoen R, Mailoa JP, McMeekin DP, Hoye RL, Bailie CD, Leijtens T, Peters IM, Minichetti MC, Rolston N, Prasanna R, Sofia S, Harwood D, Ma W, Moghadam F, Snaith HJ, Buonassisi T, Holman ZC, Bent SF, McGehee MD (2017) 23.6%-efficient monolithic perovskite/silicon tandem solar cells with improved stability. Nat Energy 2:17009
Chakraborty S, Sen A, Maiti HS (2006) Selective detection of methane and butane by temperature modulation in iron doped tin oxide sensors. Sensors Actuators B Chem 115:610–613. https://doi.org/10.1016/j.snb.2005.10.046
Chan C, Peng H, Liu G, McIlwrath K, Zhang XF, Huggins RA, Cui Y (2007) High-performance lithium battery anodes using silicon nanowires. Nat Nanotechnol 3:31–35. https://doi.org/10.1038/nnano.2007.411
Chan SHS, Wu TY, Juan JC, Teh CY (2011) Recent developments of metal oxide semiconductors as photocatalysts in advanced oxidation processes (AOPs) for treatment of dye waste-water. J Chem Technol Biotechnol 86:1130–1158. https://doi.org/10.1002/jctb.2636
Chandiran AK, Tetreault N, Humphry-baker R, Kessler F, Baranoff E, Yi C, Nazeeruddin MK, Grätzel M (2012) Sub-nanometer Ga2O3 tunnelling layer by atomic layer deposition to achieve 1.1V open-circuit potential in dye-sensitized solar cells. Nano Lett 12:3941. https://doi.org/10.1021/nl301023r
Chang S-H, Chen J-Z, Hsiao S-H, Lin G-W (2014) Nanohardness, corrosion and protein adsorption properties of CuAlO2 films deposited on 316L stainless steel for biomedical applications. Appl Surf Sci 289:455–461. https://doi.org/10.1016/j.apsusc.2013.11.004
Chapin DM, Fuller CS, Pearson GL (1954) A new silicon p-n junction photocell for converting solar radiation into electrical power. J Appl Phys 25:676–677. https://doi.org/10.1063/1.1721711
Chen SG, Chappel S, Diamant Y, Zaban A (2001) Preparation of Nb2O5 coated TiO2 nanoporous electrodes and their application in dye-sensitized solar cells. Chem Mater 13:4629–4634. https://doi.org/10.1021/cm010343b
Chen Z, Cao Y, Qian J, Aia X, Yang H (2010) Facile synthesis and stable lithium storage performances of Sn-sandwiched nanoparticles as a high capacity anode material for rechargeable Li batteries. J Mater Chem 20:7266–7271. https://doi.org/10.1039/c0jm00829j
Chen C, Xie Y, Ali G, Yoo SH, Cho SO (2011) Improved conversion efficiency of Ag2S quantum dot-sensitized solar cells based on TiO2 nanotubes with a ZnO recombination barrier layer. Nanoscale Res Lett 6:462. https://doi.org/10.1186/1556-276X-6-462
Chen Z, Ren Y, Jansen AN, Lin CK, Weng W, Amine K (2013) New class of nonaqueous electrolytes for long-life and safe lithium-ion batteries. Nat Commun 4:1513. https://doi.org/10.1038/ncomms2518
Cheng Z, Zha SW, Aguilar L, Wang D, Winnick J, Liua M (2006) A solid oxide fuel cell running on H2S/CH4 fuel mixtures. Electrochem Solid-State Lett 9:A31–A33. https://doi.org/10.1149/1.2137467
Cheng XB, Huang JQ, Peng HJ, Nie JQ, Liu XY, Zhang Q, Wei F (2014a) Polysulfide shuttle control: towards a lithium-sulfur battery with superior capacity performance up to 1000 cycles by matching the sulfur/electrolyte loading. J Power Sources 253:263–268. https://doi.org/10.1016/j.jpowsour.2013.12.031
Cheng M-Y, Ye Y-S, Chiu T-M, Pan C-J, Hwang B-J (2014b) Size effect of nickel oxide for lithium ion battery anode. J Power Sources 253:27–34. https://doi.org/10.1016/j.jpowsour.2013.12.037
Choi SJ, Fuchs F, Demadrille R, Grévin B, Jang BH, Lee JS, Lee JH, Harry L, Tuller HL, Kim ID (2014) Fast responding exhaled-breath sensors using WO3 hemitubes functionalized by graphene-based electronic sensitizers for diagnosis of diseases. ACS Appl Mater Interfaces 6:9061–9070. https://doi.org/10.1021/am501394r
Chong MN, Jin B, Chow CWK, Saint C (2010) Recent developments in photocatalytic water treatment technology: a review. Water Res 44:2997–3027. https://doi.org/10.1016/j.watres.2010.02.039
Cohn AP, Oakes L, Carter R, Chatterjee S, Westover AS, Share K, Pint CL (2014) Assessing the improved performance of freestanding, flexible graphene and carbon nanotube hybrid foams for lithium ion battery anodes. Nanoscale 6:4669–4675. https://doi.org/10.1039/C4NR00390J
Comini E (2016) Metal oxide nanowire chemical sensors: innovation and quality of life. Mater Today 19:559–567. https://doi.org/10.1016/j.mattod.2016.05.016
Dai K, Li D, Lu L, Liu Q, Changhao L, Lv J, Zhu G (2014) Plasmonic TiO2/AgBr/Ag ternary composite nanosphere with heterojunction structure for advanced visible light photocatalyst. Appl Surf Sci 314:864–871. https://doi.org/10.1016/j.apsusc.2014.06.183
Danilovic N, Luo JL, Chuang KT, Sanger AR (2009) Ce0.9Sr0.1VOx (x = 3, 4) as anode materials for H2S-containing CH4 fueled solid oxide fuel cells. J Power Sources 192:247–257. https://doi.org/10.1016/j.jpowsour.2009.03.045
Daroonparvar M, Azizi M, Yajid M, Yusof NM, Bakhsheshi-rad HR, Hamzah E, Mardanikivi T (2015) Deposition of duplex MAO layer/nanostructured titanium dioxide composite coatings on Mg-1% Ca alloy using a combined technique of air plasma spraying and micro arc oxidation. J Alloys Compd 649:591–605. https://doi.org/10.1016/j.jallcom.2015.07.200
Das S, Jayaraman V (2014) SnO2: a comprehensive review on structures and gas sensors. Prog Mater Sci 66:112–255. https://doi.org/10.1016/j.pmatsci.2014.06.003
Dembele KT, Selopal GS, Soldano C, Nechache R, Rimada JC, Concina I, Sberveglieri G, Rosei F, Vomiero A (2013) Hybrid carbon nanotubes–TiO2 photoanodes for high efficiency dye-sensitized solar cells. J Phys Chem C 117:14510–14517. https://doi.org/10.1021/jp403553t
Deng Q, Duan X, Ng DHL, Tang H, Yang Y, Kong M, Wu Z, Cai W, Wang G (2012) Ag nanoparticle decorated nanoporous ZnO microrods and their enhanced photocatalytic activities. ACS Appl Mater Interfaces 4:6030–6037. https://doi.org/10.1021/am301682g
Desai UV, Xu C, Wu J, Gao D (2013) Hybrid TiO2–SnO2 nanotube arrays for dye-sensitized solar cells. J Phys Chem C 117:3232–3239. https://doi.org/10.1021/jp3096727
Diamant Y, Chappel S, Chen SG, Melamed O, Zaban A (2004) Core–shell nanoporous electrode for dye sensitized solar cells: the effect of shell characteristics on the electronic properties of the electrode. Coord Chem Rev 248:1271–1276. https://doi.org/10.1016/j.ccr.2004.03.003
Diaz B, Harkonen E, Swiatowska J, Maurice V, Seyeux A, Marcus P, Ritala M (2011) Low-temperature atomic layer deposition of Al2O3 thin coatings for corrosion protection of steel: surface and electrochemical analysis. Corros Sci 53:2168–2175. https://doi.org/10.1016/j.corsci.2011.02.036
Ding S, Chen JS, Qi G, Duan X, Wang Z, Giannelis EP, Archer LA, Lou XW (2011) Formation of SnO2 hollow nanospheres inside mesoporous silica nanoreactors. J Am Chem Soc 133:21–23. https://doi.org/10.1021/ja108720w
Du J, Du Z, Hu J-S, Pan Z, Shen Q, Sun J, Long D, Dong H, Sun L, Zhong X, Wan LJ (2016a) Zn–Cu–In–Se quantum dot solar cells with a certified power conversion efficiency of 11.6%. J Am Chem Soc 138:4201–4209. https://doi.org/10.1021/jacs.6b00615
Du Z, Pan Z, Fabregat-Santiago F, Zhao K, Long D, Zhang H, Zhao Y, Zhong X, Yu JS, Bisquert J (2016b) Carbon counter-electrode-based quantum-dot-sensitized solar cells with certified efficiency exceeding 11%. J Phys Chem Lett 7:3103–3111. https://doi.org/10.1021/acs.jpclett.6b01356
Ejenstam L, Ovaskainen L, Rodriguez-Meizoso I, Wågberg L, Pan J, Swerin A, Claesson PM (2013) The effect of superhydrophobic wetting state on corrosion protection – the AKD example. J Colloid Interface Sci 412:56–64. https://doi.org/10.1016/j.jcis.2013.09.006
Fedel M, Deflorian F (2016) Electrochemical characterization of atomic layer deposited Al2O3 coatings on AISI 316L stainless steel. Electrochim Acta 203:404–415. https://doi.org/10.1016/j.electacta.2016.02.107
Fuser Pillis M, Altomari Geribola G, Scheidt G, De Araújo ED, Lopes de Oliveira MC, Antunes RA (2015) Corrosion of thin, magnetron sputtered Nb2O5 films. Corros Sci 102:317–325. https://doi.org/10.1016/j.corsci.2015.10.023
Gao B, Shen C, Zhang B, Zhang M, Yuan S, Yang Y, Chen G (2014) Green synthesis of highly efficient CdSe quantum dots for quantum-dots-sensitized solar cells. J Appl Phys 115:193104. https://doi.org/10.1063/1.4876118
Ghosh R, Brennaman MK, Uher T, Ok M-R, Samulski ET, McNeil LE, Meyer TJ, Lopez R (2011) Nanoforest Nb2O5 photoanodes for dye-sensitized solar cells by pulsed laser deposition. ACS Appl Mater Interfaces 3:3929–3935. https://doi.org/10.1021/am200805x
Gleiter H (1989) Nanocrystalline materials. Prog Mater Sci 33:223–315. https://doi.org/10.1016/0079-6425(89)90001-7
Gnedenkov SV, Sinebryukhov SL, Mashtalyar DV, Imshinetskiy IM, Gnedenkov AS, Samokhin AV, Tsvetkov YV (2015) Protective composite coatings obtained by plasma electrolytic oxidation on magnesium alloy MA8. Vacuum 120:107–114. https://doi.org/10.1016/j.vacuum.2015.02.004
Goldoni A, Alijani V, Sangaletti L, D’Arsiè L (2018) Advanced promising routes of carbon/metal oxides hybrids in sensors: a review. Electrochim Acta 266:139–150. https://doi.org/10.1016/j.electacta.2018.01.170
Green MA, Emery K, Hishikawa Y, Warta W, Dunlop ED (2016) Solar cell efficiency tables (version 48). Prog Photovolt Res Appl 24:905–913. https://doi.org/10.1002/pip.2788
Guo E, Yin L (2014) Nitrogen doped TiO2-CuxO core-shell mesoporous spherical hybrids for high-performance dye-sensitized solar cells. Phys Chem Chem Phys 17:563–574. https://doi.org/10.1039/c4cp03132f
Gupta RK, Birbilis N (2015) The influence of nanocrystalline structure and processing route on corrosion of stainless steel: a review. Corros Sci 92:1–15. https://doi.org/10.1016/j.corsci.2014.11.041
Gupta Chatterjee S, Chatterjee S, Ray AK, Chakraborty AK (2015) Graphene-metal oxide nanohybrids for toxic gas sensor: a review. Sensors Actuators B Chem 221:1170–1181. https://doi.org/10.1016/j.snb.2015.07.070
Haile SM (2003) Fuel cell materials and components. Acta Mater 51:5981–6000
Han F, Kambala VSR, Srinivasan M, Rajarathnam D, Naidu R (2009) Tailored titanium dioxide photocatalysts for the degradation of organic dyes in wastewater treatment: a review. Appl Catal A Gen 359:25–40. https://doi.org/10.1016/j.apcata.2009.02.043
Haridas D, Gupta V (2012) Enhanced response characteristics of SnO2 thin film based sensors loaded with Pd clusters for methane detection. Sensors Actuators B Chem 166–167:156–164. https://doi.org/10.1016/j.snb.2012.02.026
He H, Gorte RJ, Vohs JM (2005) Highly sulfur tolerant cu-ceria anodes for SOFCs. Electrochem Solid-State Lett 8:A279. https://doi.org/10.1149/1.1896469
Heo JH, Jang MH, Lee MH, Shin DH, Kim DH, Moon SH, Kim SW, Park BJ, Im SH (2017) High-performance solid-state PbS quantum dot-sensitized solar cells prepared by introduction of hybrid perovskite interlayer. ACS Appl Mater Interfaces 9:41104–41110. https://doi.org/10.1021/acsami.7b12046
Hoffert MI, Caldeira K, Jain AK, , Haites EF, Harvey LD, Potter SD, Schlesinger ME, Schneider SH, Watts RG, Wigley TM, Wuebbles DJ (1998) Energy implications of future stabilization of atmospheric CO2 content. Nature 395:881
Hsieh Y, Lee M, Wang G (2015) Sb2S3 quantum-dot sensitized solar cells with silicon nanowire photoelectrode. Int J Photoenergy 2015:1–10. https://doi.org/10.1155/2015/213858
Huang Y-H, Dass RI, Denyszyn JC, Goodenough JB (2006) Synthesis and characterization of Sr2MgMoO6−δ: an anode material for the solid oxide fuel cell. J Electrochem Soc 153:A1266–A1272. https://doi.org/10.1149/1.2195882
Inturi SNR, Boningari T, Suidan M, Smirniotis PG (2014) Visible-light-induced photodegradation of gas phase acetonitrile using aerosol-made transition metal (V, Cr, Fe, Co, Mn, Mo, Ni, Cu, Y, Ce, and Zr) doped TiO2. Appl Catal B Environ 144:333–342. https://doi.org/10.1016/j.apcatb.2013.07.032
Jayawardena KDGI, Rozanski LJ, Mills CA, Beliatis MJ, Nismy NA, Silva RP (2013) ‘Inorganics-in-Organics’: recent developments and outlook for 4G polymer solar cells. Nanoscale 5:8411. https://doi.org/10.1039/c3nr02733c
Jin YX, Xi JB, Zhang ZY, Xiao JW, Xiao F, Qian LH, Wang S (2015) An ultra-low Pd loading nanocatalyst with efficient catalytic activity. Nanoscale 7:5510–5515. https://doi.org/10.1039/c5nr00599j
Joicy S, Mahesh A, Asokan V, Vaseeharan B, Arunkumar D, Thangadurai P (2017) Phosphine-free, highly emissive, water-soluble Mn:ZnSe/ZnS Core–Shell Nanorods: synthesis, characterization, and in vitro bioimaging of HEK293 and HeLa cells. ACS Appl Nano Mater acsanm.7b00218. https://doi.org/10.1021/acsanm.7b00218
Joicy S, Arun M, Vaseeharan B, Arunkumar D, Thangadurai P (2018) Colloidal gradated alloyed (Cu)ZnInS/ZnS core/shell nanocrystals with tunable optical properties for live cell optical imaging. Chem Select 3:5993–6008. https://doi.org/10.1002/slct.201800742
Jung HS, Lee J-K, Nastasi M, Lee SW, Kim JY, Park JS, Hong KS, Shin H (2005) Preparation of nanoporous MgO-coated TiO2 nanoparticles and their application to the electrode of dye-sensitized solar cells. Langmuir 21:10332–10335. https://doi.org/10.1021/la051807d
Kerkez-Kuyumcu Ö, Kibar E, Dayıoğlu K, Gedik F, Akın AN, Özkara-Aydınoğlu S (2015) A comparative study for removal of different dyes over M/TiO2 (M = Cu, Ni, Co, Fe, Mn and Cr) photocatalysts under visible light irradiation. J Photochem Photobiol A Chem 311:176–185. https://doi.org/10.1016/j.jphotochem.2015.05.037
Khataee AR, Kasiri MB (2010) Photocatalytic degradation of organic dyes in the presence of nanostructured titanium dioxide: influence of the chemical structure of dyes. J Mol Catal A Chem 328:8–26. https://doi.org/10.1016/j.molcata.2010.05.023
Kim J-Y, Kang SH, Kim HS, Sung Y-E (2010) Preparation of highly ordered mesoporous Al2O3/TiO2 and its application in dye-sensitized solar cells. Langmuir 26:2864–2870. https://doi.org/10.1021/la902931w
Kim JS, Nair VV, Vohs JM, Gorte RJ (2011) A study of the methane tolerance of LSCM-YSZ composite anodes with Pt, Ni, Pd and ceria catalysts. Scr Mater 65:90–95. https://doi.org/10.1016/j.scriptamat.2010.06.016
Kim SB, Park JY, Kim CS, Okuyama K, Lee SE, Jang HD, Kim TO (2015) Effects of graphene in dye-sensitized solar cells based on nitrogen-doped TiO2 composite. J Phys Chem C 119:16552–16559. https://doi.org/10.1021/acs.jpcc.5b02309
Kim HW, Na HG, Kwon YJ, Kang SY, Choi MS, Bang JH, Wu P, Kim SS (2017) Microwave-assisted synthesis of graphene–SnO2 nanocomposites and their applications in gas sensors. ACS Appl Mater Interfaces 9:31677–31682. https://doi.org/10.1021/acsami.7b02533
Kobsiriphat W, Madsen BD, Wang Y, Marks LD, Barnett SA (2009) La0.8Sr0.2Cr1-xRuxO3-δ-Gd0.1Ce0.9O1.95 solid oxide fuel cell anodes: Ru precipitation and electrochemical performance. Solid State Ionics 180:257–264. https://doi.org/10.1016/j.ssi.2008.12.022
Kojima A, Teshima K, Shirai Y, Miyasaka T (2009) Organometal halide perovskites as visible-light sensitizers for photovoltaic cells. J Am Chem Soc 131:6050–6051. https://doi.org/10.1021/ja809598r
Kulkar M, Thakur P (2014) Photocatalytic degradation and mineralization of reactive textile azo dye using semiconductor metal oxide nano particles. Int J Eng Res Gen Sci 2:245–254
Kurokawa H, Sholklapper TZ, Jacobson CP, De Jonghe LC, Visco SJ (2007a) Ceria Nanocoating for sulfur tolerant Ni-based anodes of solid oxide fuel cells. Electrochem Solid-State Lett 10:B135–B138. https://doi.org/10.1149/1.2748630
Kurokawa H, Yang L, Jacobson CP, De Jonghe LC, Visco SJ (2007b) Y-doped SrTiO3 based sulfur tolerant anode for solid oxide fuel cells. J Power Sources 164:510–518. https://doi.org/10.1016/j.jpowsour.2006.11.048
Lan Z, Chen X, Zhang S, Wu J (2018) CdSexS1−x/CdS-cosensitized 3D TiO2 hierarchical nanostructures for efficient energy conversion. J Solid State Electrochem 22:347–353. https://doi.org/10.1007/s10008-017-3748-3
Li L, Yang X, Gao J, Tian H, Zhao J, Hagfeldt A, Sun L (2011) Highly efficient CdS quantum dot-sensitized solar cells based on a modified polysulfide electrolyte. J Am Chem Soc 133:8458–8460. https://doi.org/10.1021/ja201841p
Li T, Zeng W, Wang Z (2015) Quasi-one-dimensional metal-oxide-based heterostructural gas-sensing materials: a review. Sensors Actuators B Chem 221:1570–1585. https://doi.org/10.1016/j.snb.2015.08.003
Li W, Cai X, Ma S, Zhan X, Lan F, Wu Y, Gu Z (2016a) Synthesis of amphipathic superparamagnetic Fe3O4 Janus nanoparticles via a moderate strategy and their controllable self-assembly. RSC Adv 6:40450–40458. https://doi.org/10.1039/C6RA04648G
Li Q, Chen J, Fan L, Kong X, Lu Y (2016b) Progress in electrolytes for rechargeable Li-based batteries and beyond. Green Energy Environ 1:18–42. https://doi.org/10.1016/j.gee.2016.04.006
Li M, Hua B, Luo JL, Jiang SP, Pu J, Chi B, Li J (2016c) Enhancing sulfur tolerance of Ni-based cermet anodes of solid oxide fuel cells by ytterbium-doped barium cerate infiltration. ACS Appl Mater Interfaces 8:10293–10301. https://doi.org/10.1021/acsami.6b00925
Li T, Zeng W, Long H, Wang Z (2016d) Nanosheet-assembled hierarchical SnO2 nanostructures for efficient gas-sensing applications. Sensors Actuators B Chem 231:120–128. https://doi.org/10.1016/j.snb.2016.03.003
Lin H, Irfan XW, Wu HN, Gao Y, Tang CW (2012) MoOx back contact for CdS/CdTe thin film solar cells: preparation, device characteristics, and stability. Sol Energy Mater Sol Cells 99:349–355. https://doi.org/10.1016/j.solmat.2012.01.001
Liu M, Yang L, Wang S, Blinn K, Liu M, Liu Z, Cheng Z (2009) Enhanced sulfur and coking tolerance of a mixed ion conductor for SOFCs: BaZr0.1Ce0.7Y0.2-XYbxO3-δ. Science 326:126–129. https://doi.org/10.1126/science.1174811
Liu M, Zhang R, Chen W (2014) Graphene-supported nanoelectrocatalysts for fuel cells: synthesis, properties, and applications. Chem Rev 114:5117–5160
Liu Q, Chen D, Kang Z (2015a) One-step electrodeposition process to fabricate corrosion-resistant Superhydrophobic surface on magnesium alloy. ACS Appl Mater Interfaces 7:1859–1867. https://doi.org/10.1021/am507586u
Liu W, Liu N, Sun J, Hsu PC, Li Y, Lee HW, Cui Y (2015b) Ionic conductivity enhancement of polymer electrolytes with ceramic nanowire fillers. Nano Lett 15:2740–2745. https://doi.org/10.1021/acs.nanolett.5b00600
Liu H, Hu C, Zhai H, Yang J, Liu X, Jia H (2017) Fabrication of In2O3/ZnO@Ag nanowire ternary composites with enhanced visible light photocatalytic activity. RSC Adv 7:37220–37229. https://doi.org/10.1039/C7RA04929C
Logan BE, Regan JM (2006) Microbial fuel cells—challenges and applications. Environ Sci Technol 40:5172–5180. https://doi.org/10.1021/es0627592
Lu XC, Zhu JH (2007) Cu(Pd)-impregnated La0.75Sr0.25Cr0.5Mn0.5O3-δ anodes for direct utilization of methane in SOFC. Solid State Ionics 178:1467–1475. https://doi.org/10.1016/j.ssi.2007.09.001
Lu Y, Jiang Y, Wu H, Chen W (2013) Nano-PtPd cubes on graphene exhibit enhanced activity and durability in methanol electrooxidation after CO stripping-cleaning. J Phys Chem C 117:2926–2938. https://doi.org/10.1021/jp3116726
Luan X, Wang Y (2014) Ultrathin exfoliated TiO2 nanosheets modified with ZrO2 for dye-sensitized solar cells. J Phys Chem C 118:18917–18923. https://doi.org/10.1021/jp5052112
Luo XF, Yuan CL, Zhang ZR (2008) Synthesis, photoluminescence and charge storage characteristics of isolated silver nanocrystals embedded in Al2O3 gate dielectric. Thin Solid Films 516:7675–7679. https://doi.org/10.1016/j.tsf.2008.03.017
Luo C, Xie H, Wang Q, Luo G, Liu C (2015) A review of the application and performance of carbon nanotubes in fuel cells. J Nanomater 2015:1–10
Lv M, Zheng D, Ye M, Xiao J, Guo W, Lai Y, Sun L, Lin C, Zuo J (2013) Optimized porous rutile TiO2 nanorod arrays for enhancing the efficiency of dye-sensitized solar cells. Energy Environ Sci 6:1615–1622. https://doi.org/10.1039/c3ee24125d
Lv J, Dai K, Zhang J, Lu L, Liang C, Geng L, Wang Z, Yuan G, Zhu G (2017) In situ controllable synthesis of novel surface plasmon resonance-enhanced Ag2WO4/Ag/Bi2MoO6 composite for enhanced and stable visible light photocatalyst. Appl Surf Sci 391:507–515. https://doi.org/10.1016/j.apsusc.2016.05.001
Maçaira J, Andrade L, Mendes A (2017) Highly efficient SiO2/TiO2 composite photoelectrodes for dye-sensitized solar cells. Sol Energy 158:905–916. https://doi.org/10.1016/j.solener.2017.10.056
Mahato N, Banerjee A, Gupta A, Omar S, Balani K (2015) Progress in material selection for solid oxide fuel cell technology: a review. Prog Mater Sci 72:141–337
Marom R, Amalraj SF, Leifer N, Jacob D, Aurbach D (2011) A review of advanced and practical lithium battery materials. J Mater Chem 21:9938–9954. https://doi.org/10.1039/c0jm04225k
Masciandaro S, Torrell M, Leone P, Tarancón A (2017) Three-dimensional printed yttria-stabilized zirconia self-supported electrolytes for solid oxide fuel cell applications. J Eur Ceram Soc https://doi.org/https://doi.org/10.1016/j.jeurceramsoc.2017.11.033
McDaniel H, Fuke N, Pietryga JM, Klimov VI (2013) Engineered CuInSexS2–x quantum dots for sensitized solar cells. J Phys Chem Lett 4:355–361. https://doi.org/10.1021/jz302067r
Meng X, Li Z, Chen J, Xie H, Zhang Z (2018) Enhanced visible light-induced photocatalytic activity of surface-modified BiOBr with Pd nanoparticles. Appl Surf Sci 433:76–87. https://doi.org/10.1016/j.apsusc.2017.09.103
Metroke TL, Parkhill RL, Knobbe ET (2001) Passivation of metal alloys using sol–gel-derived materials-a review. Prog Org Coat 41:233–238. https://doi.org/10.1016/S0300-9440(01)00134-5
Mikhaylova M, Kim DK, Bobrysheva N, Osmolowsky M, Semenov V, Tsakalakos T, Muhammed M (2004) Superparamagnetism of magnetite nanoparticles: dependence on surface modification. Langmuir 20:2472–2477. https://doi.org/10.1021/la035648e
Miller DR, Akbar SA, Morris PA (2014) Nanoscale metal oxide-based heterojunctions for gas sensing: a review. Sensors Actuators B Chem 204:250–272. https://doi.org/10.1016/j.snb.2014.07.074
Mills A, Davies RH, Worsley D (1993) Water purification by semiconductor photocatalysis. Chem Soc Rev 22:417–425. https://doi.org/10.1039/CS9932200417
Mondal K, Sharma A (2016) Recent advances in the synthesis and application of photocatalytic metal-metal oxide core-shell nanoparticles for environmental remediation and their recycling process. RSC Adv 6:83589–83612. https://doi.org/10.1039/C6RA18102C
Moon HG, Choi YR, Shim YS, Choi KI, Lee JH, Kim JS, Yoon SJ, Park HH, Kang CY, Jang HW (2013) Extremely sensitive and selective NO probe based on villi-like WO3 nanostructures for application to exhaled breath analyzers. ACS Appl Mater Interfaces 5:10591–10596. https://doi.org/10.1021/am402456s
Nabae Y, Yamanaka I (2009) Alloying effects of Pd and Ni on the catalysis of the oxidation of dry CH4 in solid oxide fuel cells. Appl Catal A Gen 369:119–124. https://doi.org/10.1016/j.apcata.2009.09.007
Nageswara Rao A, Sivasankar B, Sadasivam V (2009) Kinetic study on the photocatalytic degradation of salicylic acid using ZnO catalyst. J Hazard Mater 166:1357–1361. https://doi.org/10.1016/j.jhazmat.2008.12.051
Naik GK, Mishra PM, Parida K (2013) Green synthesis of Au/TiO2for effective dye degradation in aqueous system. Chem Eng J 229:492–497. https://doi.org/10.1016/j.cej.2013.06.053
Nalwa HS (2000) Handbook of nanostructured materials and nanotechnology. Academic, Burlington
O’Regan B, Grätzel M (1991) A low-cost, high-efficiency solar cell based on dye-sensitized colloidal TiO2 films. Nature 353:737
Park C-M, Kim J-H, Kim H, Sohn H-J (2010) Li-alloy based anode materials for Li secondary batteries. Chem Soc Rev 39:3115–3141. https://doi.org/10.1039/b919877f
Patil PS, Mujawar SH, Inamdar AI, Shinde PS, Deshmukh HP, Sadale SB (2005) Structural, electrical and optical properties of TiO2 doped WO3 thin films. Appl Surf Sci 252:1643–1650. https://doi.org/10.1016/j.apsusc.2005.03.074
Prasai D, Tuberquia JC, Harl RR, Jennings GH, Bolotin KI (2012) Graphene: corrosion-inhibiting coating. ACS Nano 6:1102–1108. https://doi.org/10.1021/nn203507y
Quiñones C, Ayala J, Vallejo W (2010) Methylene blue photoelectrodegradation under UV irradiation on Au/Pd-modified TiO2 films. Appl Surf Sci 257:367–371. https://doi.org/10.1016/j.apsusc.2010.06.079
Quy CT, Thai NX, Hoa ND, Thanh Le DT, Hung CH, Duy NV, Hieu NV (2018) C2H5OH and NO2 sensing properties of ZnO nanostructures: correlation between crystal size, defect level and sensing performance. RSC Adv 8:5629–5639. https://doi.org/10.1039/C7RA13702H
Rajeshwar K, Osugi ME, Chanmanee W, Chenthamarakshan CR, Zanoni MVB, Kajitvichyanukul P, Krishnan-Ayer R (2008) Heterogeneous photocatalytic treatment of organic dyes in air and aqueous media. J Photochem Photobiol C: Photochem Rev 9:171–192. https://doi.org/https://doi.org/10.1016/j.jphotochemrev.2008.09.001
Ralston KD, Birbilis N (2010) Effect of grain size on corrosion. Corrosion 66:1–4. https://doi.org/10.5006/1.3462912
Ralston KD, Fabijanic D, Birbilis N (2011) Effect of grain size on corrosion of high purity aluminium. Electrochim Acta 56:1729–1736. https://doi.org/10.1016/j.electacta.2010.09.023
Rashed MN, Eltaher MA, Abdou ANA (2017) Adsorption and photocatalysis for methyl orange and Cd removal from wastewater using TiO2/sewage sludge-based activated carbon nanocomposites. R Soc Open Sci 4:170834. https://doi.org/10.1098/rsos.170834
Rofagha R, Langer R, El-Sherik AM, Erb U, Palumbo G, Aust KT (1991) The corrosion behaviour of nanocrystalline nickel. Scr Metall Mater 25:2867–2872. https://doi.org/10.1016/0956-716X(91)90171-V
Rozier P, Tarascon JM (2015) Review-Li-rich layered oxide cathodes for next-Generation Li-ion batteries: chances and challenges. J Electrochem Soc 162:A2490–A2499. https://doi.org/10.1149/2.0111514jes
Sadreddini S, Salehi Z, Rassaie H (2015) Characterization of Ni–P–SiO2 nano-composite coating on magnesium. Appl Surf Sci 324:393–398
Sahu SC, Samantara AK, Seth M, Parwaiz S, Singh BP, Rath PC, Jena BK (2013) A facile electrochemical approach for development of highly corrosion protective coatings using graphene nanosheets. Electrochem Commun 32:22–26. https://doi.org/10.1016/j.elecom.2013.03.032
Sandroni M, Gueret R, Wegner KD, Reiss P, Fortage J, Aldakov D, Collomb MN (2018) Cadmium-free CuInS2/ZnS quantum dots as efficient and robust photosensitizers in combination with a molecular catalyst for visible light-driven H2 production in water. Energy Environ Sci. https://doi.org/10.1039/C8EE00120K
Saravanan R, Karthikeyan N, Gupta VK, Thirumal E, Thangadurai P, Narayanan V, Stephen A (2013a) ZnO/Ag nanocomposite: an efficient catalyst for degradation studies of textile effluents under visible light. Mater Sci Eng C 33:2235–2244. https://doi.org/10.1016/j.msec.2013.01.046
Saravanan R, Thirumal E, Gupta VK, Narayanan V, Stephen A (2013b) The photocatalytic activity of ZnO prepared by simple thermal decomposition method at various temperatures. J Mol Liq 177:394–401. https://doi.org/10.1016/j.molliq.2012.10.018
Saravanan R, Gracia F, Khan MM, Poornima V, Gupta VK, Narayanan V, Stephen A (2015a) ZnO/CdO nanocomposites for textile effluent degradation and electrochemical detection. J Mol Liq 209:374–380. https://doi.org/10.1016/j.molliq.2015.05.040
Saravanan R, Mansoob Khan M, Gupta VK, Mosquera E, Gracia F, Narayanan V, Stephen A (2015b) ZnO/Ag/CdO nanocomposite for visible light-induced photocatalytic degradation of industrial textile effluents. J Colloid Interface Sci 452:126–133. https://doi.org/10.1016/j.jcis.2015.04.035
Selvaraj V, Alagar M (2007) Pt and Pt-Ru nanoparticles decorated polypyrrole/multiwalled carbon nanotubes and their catalytic activity towards methanol oxidation. Electrochem Commun 9:1145–1153. https://doi.org/10.1016/j.elecom.2007.01.011
Sharaf OZ, Orhan MF (2014) An overview of fuel cell technology: fundamentals and applications. Renew Sust Energ Rev 32:810–853
Shen GX, Chen YC, Lin L, Lin CJ, Scantlebury D (2005) Study on a hydrophobic nano-TiO2 coating and its properties for corrosion protection of metals. Electrochim Acta 50:5083–5089. https://doi.org/10.1016/j.electacta.2005.04.048
Sheng X, Wouters B, Breugelmans T, Hubin A, Vankelecom IFJ, Pescarmona PP (2014) Cu/CuxO and Pt nanoparticles supported on multi-walled carbon nanotubes as electrocatalysts for the reduction of nitrobenzene. Appl Catal B Environ 147:330–339. https://doi.org/10.1016/j.apcatb.2013.09.006
Shigeru N, Miguel C, Ingrid R, Michael P, Katsumi K, Shogo I, Koji M (2010) CIGS absorbers and processes. Prog Photovolt Res Appl 18:453–466. https://doi.org/10.1002/pip.969
Shih Y-C, Yeh C-W, Lin K-F (2016) Photovoltaic performance enhancement of dye-sensitized solar cells by incorporating poly(sodium-4-styrenesulfonate)-physisorbed MWCNTs into photoelectrode. Mater Chem Phys 171:352–358. https://doi.org/10.1016/j.matchemphys.2016.01.028
Shinde SS, Patil PS, Gaikwad RS, Mane RS, Pawar BN, Rajpure KY (2010) Influences in high quality zinc oxide films and their photoelectrochemical performance. J Alloys Compd 503:416–421. https://doi.org/10.1016/j.jallcom.2010.05.019
Slama R, Ghribi F, Houas A, Barthou C, Mir LE (2011) Visible photocatalytic properties of vanadium doped zinc oxide aerogel nanopowder. Thin Solid Films 519:5792–5795. https://doi.org/10.1016/j.tsf.2010.12.197
Steven M, Vohs JM, Gorte RJ (2003) Effect of precious-metal dopants on SOFC anodes for direct utilization of hydrocarbons. Electrochem Solid-State Lett 6:A240–A243. https://doi.org/10.1149/1.1613231
Su J, Zou X-X, Li G-D, Wei X, Yan C, Wang Y, Zhao J, Zhou L, Chen JS (2011) Macroporous V2O5−BiVO4 composites: effect of heterojunction on the behavior of Photogenerated charges. J Phys Chem C 115:8064–8071. https://doi.org/10.1021/jp200274k
Suryanarayana C (1995) Nanocrystalline materials. Int Mater Rev 40:41–64. https://doi.org/10.1179/imr.1995.40.2.41
Tang Y, Yang L, Fang S, Qiu Z (2009) Li4Ti5O12 hollow microspheres assembled by nanosheets as an anode material for high-rate lithium ion batteries. Electrochim Acta 54:6244–6249. https://doi.org/10.1016/j.electacta.2009.05.092
Thorpe SJ, Ramaswami B, Aust KT (1988) Corrosion and auger studies of a nickel-base metal-metalloid glass. J Electrochem Soc 135:2170–2179. https://doi.org/10.1149/1.2096234
Tian L (2017) Metallurgy and metal physics a short review on mechanical behavior of Nanocrystalline materials. Tian Int J Met Met Phys 2:008
Toda K, Furue R, Hayami S (2015) Recent progress in applications of graphene oxide for gas sensing: a review. Anal Chim Acta 878:43–53. https://doi.org/10.1016/j.aca.2015.02.002
Vazirinasab E, Jafari R, Momen G (2017) Application of superhydrophobic coatings as a corrosion barrier: a review. Surf Coat Technol 341:40–56. https://doi.org/10.1016/j.surfcoat.2017.11.053
Wan Z, Zhang TF, Lee H-B-R, Yang JH, Choi WC, Han B, Kim KH, Kwon SH (2015) Improved corrosion resistance and mechanical properties of CrN hard coatings with an atomic layer deposited Al2O3 interlayer. ACS Appl Mater Interfaces 7:26716–26725. https://doi.org/10.1021/acsami.5b08696
Wang S, Zhang B (2013) SPR propelled visible-active photocatalysis on Au-dispersed Co3O4 films. Appl Catal A Gen 467:585–592. https://doi.org/10.1016/j.apcata.2013.07.021
Wang S, Si N, Xia Y, Liu L (2015) Influence of nano-SiC on microstructure and property of MAO coating formed on AZ91D magnesium alloy. Trans Nonferrous Metals Soc China 25:1926–1934. https://doi.org/10.1016/S1003-6326(15)63800-6
Wang C, Gao Y, Wang L, Li P (2017) Morphology regulation, structural, and photocatalytic properties of ZnO hierarchical microstructures synthesized by a simple hydrothermal method. Phys Status Solidi Appl Mater Sci 214. doi: https://doi.org/10.1002/pssa.201600876
Wang L, Tang C, Takeuchi KJ, Takeuchi ES, Marschilok AC (2018) Synthesis and characterization of Li4Ti5O12 anode materials with enhanced high-rate performance in lithium-ion batteries. MRS Adv 3:575–580. https://doi.org/10.1557/adv.2018.247
Wu XM, Wang LD, Luo F, Ma BB, Zhan C, Qiu Y (2007) BaCO3 modification of TiO2 electrodes in quasi-solid-state dye-sensitized solar cells: performance improvement and possible mechanism. J Phys Chem C 111:8075–8079. https://doi.org/10.1021/Jp0706533
Wu G, Zeng X, Yuan G (2008) Growth and corrosion of aluminum PVD-coating on AZ31 magnesium alloy. Mater Lett 62:4325–4327. https://doi.org/10.1016/j.matlet.2008.07.014
Wu W-Q, Xu Y-F, Rao H-S, Su C-Y, Kuang D-B (2014) Multistack integration of three-dimensional hyperbranched anatase titania architectures for high-efficiency dye-sensitized solar cells. J Am Chem Soc 136:6437–6445. https://doi.org/10.1021/ja5015635
Yang J, Zhong X (2016) CdTe based quantum dot sensitized solar cells with efficiency exceeding 7% fabricated from quantum dots prepared in aqueous media. J Mater Chem A 4:16553–16561. https://doi.org/10.1039/C6TA07399A
Ye Y, He T, Li Y, Tang EH, Reitz TL, Jiang SP (2008) Pd-promoted La0.75Sr0.25Cr0.5Mn0.5O3/YSZ composite anodes for direct utilization of methane in SOFCs. J Electrochem Soc 155:B811–B818. https://doi.org/10.1149/1.2931518
Ye M, Chen C, Lv M, Zheng D, Guo W, Lin C (2013) Facile and effective synthesis of hierarchical TiO2 spheres for efficient dye-sensitized solar cells. Nanoscale 5:6577–6583. https://doi.org/10.1039/c3nr01604h
Ye M, Gao X, Hong X, Liu Q, He C, Liu X, Lin C (2017) Recent advances in quantum dot-sensitized solar cells: insights into photoanodes, sensitizers, electrolytes and counter electrodes. Sustain Energy Fuels 1:1217–1231. https://doi.org/10.1039/C7SE00137A
Yin H, Yu K, Song C, Huang R, Zhu Z (2014) Synthesis of Au-decorated V2O5@ZnO heteronanostructures and enhanced plasmonic photocatalytic activity. ACS Appl Mater Interfaces 6:14851–14860. https://doi.org/10.1021/am501549n
Yu P, Zhu K, Norman AG, Ferrere S, Frank AJ, Nozik AJ (2006) Nanocrystalline TiO2 solar cells sensitized with InAs quantum dots. J Phys Chem B 110:25451–25454. https://doi.org/10.1021/jp064817b
Yu Y, Wen W, Qian XY, Liu JB, Wu JM (2017) UV and visible light photocatalytic activity of Au/TiO2 nanoforests with anatase/rutile phase junctions and controlled Au locations. Sci Rep 7:1–13. https://doi.org/10.1038/srep41253
Yuan CL, Lee PS, Ye SL (2007) Formation, photoluminescence and charge storage characteristics of Au nanocrystals embedded in amorphous Al2 O3 matrix. EPL (Europhys Lett) 80:67003
Yun JW, Yoon SP, Park S, Kim HS, Nam SW (2011) Analysis of the regenerative H2S poisoning mechanism in Ce0.8Sm0.2O2-δ coated Ni/YSZ anodes for intermediate temperature solid oxide fuel cells. Int J Hydrog Energy 36:787–796. https://doi.org/10.1016/j.ijhydene.2010.10.060
Zeiger W, Schneider M, Scharnweber D, Worch H (1995) Corrosion behaviour of a nanocrystalline FeA18 alloy. Nanostruct Mater 6:1013–1016. https://doi.org/10.1016/0965-9773(95)00234-0
Zha S, Tsang P, Cheng Z, Liu M (2005) Electrical properties and sulfur tolerance of La0.75Sr 0.25Cr1-xMnxO3 under anodic conditions. J Solid State Chem 178:1844–1850. https://doi.org/10.1016/j.jssc.2005.03.027
Zhang X, Wang G, Liu X, Wu J, Li M, Gu J, Liu H, Fang B (2008) Different CuO nanostructures: synthesis, characterization, and applications for glucose sensors. J Phys Chem C 112:16845–16849
Zhang L, Du L, Yu X, Tan S, Cai X, Yang P, Gu Y, Mai W (2014a) Significantly enhanced photocatalytic activities and charge separation mechanism of Pd-decorated ZnO-graphene oxide nanocomposites. ACS Appl Mater Interfaces 6:3623–3629. https://doi.org/10.1021/am405872r
Zhang J, Gao J, Church CP, Miller EM, Luther JM, Klimov VI, Beard MC (2014b) PbSe quantum dot solar cells with more than 6% efficiency fabricated in ambient atmosphere. Nano Lett 14:6010–6015. https://doi.org/10.1021/nl503085v
Zhang W, Ji G, Bu A, Zhang B (2015) Corrosion and tribological behavior of ZrO2 films prepared on stainless steel surface by the sol–gel method. ACS Appl Mater Interfaces 7:28264–28272. https://doi.org/10.1021/acsami.5b07915
Zhao J, Wang A, Green MA, Ferrazza F (1998) 19.8% efficient “honeycomb” textured multicrystalline and 24.4% monocrystalline silicon solar cells. Appl Phys Lett 73:1991–1993. https://doi.org/10.1063/1.122345
Zheng LL, Wang X, Zhang L, Wang JY, Jiang SP (2012) Effect of Pd-impregnation on performance, sulfur poisoning and tolerance of Ni/GDC anode of solid oxide fuel cells. Int J Hydrog Energy 37:10299–10310. https://doi.org/10.1016/j.ijhydene.2012.03.105
Zhou H, Chen Q, Li G, Luo S, Song T, Duan HS, Hong Z, You J, Liu Y, Yang Y (2014) Interface engineering of highly efficient perovskite solar cells. Science 345:542–546. https://doi.org/10.1126/science.1254050
Zhou D, Zhou T, Tian Y, Zhu X, Tu Y (2017) Perovskite-based solar cells: materials, methods, and future perspectives. J Nanomater 2018:1–15. https://doi.org/10.1155/2018/8148072
Zhu S, Li Q, Li F, Cao W, Li T (2016) One-pot synthesis of Ag+ doped BiVO4 microspheres with enhanced photocatalytic activity via a facile hydrothermal method. J Phys Chem Solids 92:11–18. https://doi.org/10.1016/j.jpcs.2016.01.009
Zou CW, Rao YF, Alyamani A, Chu W, Chen MJ, Patterson DA, Emanuelsson AC, Gao W (2010) Heterogeneous lollipop-like V2O5/ZnO array: a promising composite nanostructure for visible light photocatalysis. Langmuir 26:11615–11620. https://doi.org/10.1021/la101324e
Acknowledgment
The DST-SERB (EMR/2016/005795), India, and UGC-DAE-CSR, India (CSR-KN/CRS-89/2016-17/1130), are acknowledged for the research grants.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2019 Springer Nature Switzerland AG
About this chapter
Cite this chapter
Thangadurai, P., Joicy, S., Beura, R., Santhosh Kumar, J., Chitrarasu, K. (2019). Emerging Nanomaterials in Energy and Environmental Science: An Overview. In: Rajendran, S., Naushad, M., Raju, K., Boukherroub, R. (eds) Emerging Nanostructured Materials for Energy and Environmental Science. Environmental Chemistry for a Sustainable World, vol 23. Springer, Cham. https://doi.org/10.1007/978-3-030-04474-9_1
Download citation
DOI: https://doi.org/10.1007/978-3-030-04474-9_1
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-04473-2
Online ISBN: 978-3-030-04474-9
eBook Packages: Earth and Environmental ScienceEarth and Environmental Science (R0)