Abstract
All machining processes are subject to dynamic effects due to transient or forced vibrations, and dynamic mechanisms inherent to the process such as regeneration. If not controlled, they may result in high amplitude oscillations, instability and poor quality. Dynamic rigidity of the structures involved in the machining is very important in determining the dynamic behaviour of the process. Structural rigidity is also critical for deformations, and the dimensional quality of machined parts. In this chapter, important aspects of the machining process dynamics are discussed, and the methods that can be used for the analysis and modelling of the machine tool structural components and the processes are presented. Chatter stability and suppression methods will also be explained with applications.
This is a preview of subscription content, log in via an institution to check access.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
References
Merchant, M. E., Basic mechanics of the metal cutting process, ASME Journal of Applied Mechanics, 66, 1944, 168–175.
Armarego, E.J.A., Brown, R.H., The Machining of Metals, Prentice–Hall, London, 1969.
Armarego, E.J.A., Whitfield, R.C., Computer based modelling of popular machining operations for force and power predictions, Annals of the CIRP 34, 1985, 65–69.
Budak, E. and Altintas, Y., Prediction of milling force coefficients from orthogonal cutting data, ASME 1993 Winter Annual Meeting, New Orleans, USA, Manufacturing Science and Engineering, 1993, 453–459.
Stabler, G.V., Fundamental geometry of cutting tools, Proceedings of the Institution of Mechanical Engineers, 1951, 14–26.
Budak, E., Altintas, Y., Armarego, E.J.A., Prediction of milling force coefficients from orthogonal cutting data, Trans. ASME Journal of Manufacturing Science and Engineering, 118, 1996, 216–224.
Altintas, Y., Manufacturing Automation, Cambridge University Press, 2000.
Budak, E., The mechanics and dynamics of milling thin–walled structures, Ph.D. Dissertation, University of British Columbia, 1994.
Budak, E., Altintas, Y., Peripheral milling conditions for improved dimensional accuracy. International Journal of Machine Tool Design and Research, 34/7, 1994, 907–918.
Kops, L., Vo, D.T., Determination of the equivalent diameter of an end mill based on its compliance, Annals of the CIRP 39, 1990, 93–96.
Kivanc, E., Budak, E., Structural modelling of end mills for form error and stability analysis, International Journal of Machine Tools and Manufacture, 44/11, 2004, 1151–1161.
Nemes, J.A., Asamoah–Attiah, S. and Budak, E., Cutting Load Capacity of End Mills with Complex Geometry, Annals of the CIRP, 50/1, 2001, 65–68.
Rivin, E., Stiffness and Damping in Mechanical Design, Marcel Dekker, NY, 1999.
Budak, E., Altintas, Y., Modelling and avoidance of static deformations in peripheral milling of plates, International Journal of Machine Tool Design and Research 35/3, 1995, 459–476.
Budak, E., Altintas, Y., Flexible milling force model for improved surface error predictions, ASME 1992 European Joint Conference on Engineering Systems Design and Analysis, Istanbul, Turkey, ASME PD–Vol. 47–1, 1992.
Ewins, D.J., Modal Testing: Theory, Practice and Application, Taylor & Francis Group; 2nd edition, London, 2001.
T. Schmitz, R. Donaldson, Predicting high–speed machining dynamics by substructure analysis, Annals of the CIRP 49/1, 2000, 303–308.
T. Schmitz, M. Davies, M. Kennedy, Tool point frequency response prediction for high–speed machining by RCSA, Journal of Manufacturing Science and Engineering 123, 2001, 700–707.
Ertürk, A., Özgüven, H.N. and Budak, E., Analytical modelling of spindle–tool dynamics on machine tools using Timoshenko beam model and receptance coupling for the prediction of tool point FRF, International Journal of Machine Tools and Manufacture, 2008 (in press).
Ertürk, A., Özgüven, H.N. and Budak, E., Effect analysis of bearing and interface dynamics on tool point FRF for chatter stability in machine tools by using a new analytical model for spindle–tool assemblies, International Journal of Machine Tools and Manufacture, 2008 (in press).
Özgüven, H.N., A new method for harmonic response of non–proportionally damped structures using undamped modal data, Journal of Sound and Vibration, 117, 1987, 313–328.
Tlusty, J., Analysis of the state of research in cutting dynamics, Annals of the CIRP 27/2, 1978, 583–589.
Altintas, Y. and Weck, M. Chatter stability of metal cutting and grinding, Annals of the CIRP, 53/2, 2004, 619–642.
Nigm, M.M. and Sadek, M.M., Experimental investigation of the characteristics of dynamic cutting process, Trans. ASME Journal of Engineering for Industry, 1977, 410–418.
Wu, D.W. and Liu, C.R., An analytical model of cutting dynamics, Part I: model building, Trans. ASME Journal of Engineering for Industry, 107, 1985, 107–111.
Tlusty, J. and Rao, S.B., Verification and analysis of some dynamic cutting force coefficients data, Proceedings of the 6th NAMRC, University of Florida, USA, 1978, 420–426.
Tlusty, J., Polacek, M., The stability of machine tools against self excited vibrations in machining, International Research in Production Engineering, ASME, 1963, 465–474.
Tobias, S.A. and Fishwick, W., The chatter of lathe tools under orthogonal cutting conditions, Transactions of ASME, 80, 1958, 1079–1088.
Özlü, E. and Budak, E., Analytical prediction of stability limit in turning operations, Proceedings of the 9th Workshop on the Modelling of Machining Operations, Bled, Slovenia, May 2006.
Budak, E. and Altintas, Y., Analytical prediction of chatter stability in milling–part I: general, Trans. ASME Journal of Dynamic Systems, Measurement and Control, 120, 1998, 22–30.
Merdol, S.D. and Altintas, Y., Multi frequency solution of chatter stability limits for low immersion milling, Trans. ASME Journal of Manufacturing Science and Engineering, 126, 2004, 459–466.
Weck, M., Altintas, Y. and Beer, C., CAD assisted chatter free NC tool path generation in milling, International Journal of Machine Tools and Manufacture, 34, 1994, 879–891.
Tekeli, A. and Budak, E., Maximization of chatter free material removal rate in end milling using analytical methods, Journal of Machining Science and Technology 9, 2005, 147–167.
Slavicek, J. The effect of irregular tooth pitch on stability of milling, Proceedings of the 6th MTDR Conference, Manchester, UK, 1965, 15–22.
Vanherck, P. Increasing milling machine productivity by use of cutters with non–constant cutting edge pitch, 8th MTDR Conference 1966, 947–960.
Budak, E., An analytical design method for milling cutters with non constant pitch to increase stability – Part I: Theory; Part II: Application, Trans. ASME Journal of Manufacturing Science and Engineering, 125, 2003, 29–38.
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2009 Springer London
About this chapter
Cite this chapter
Budak, E. (2009). Dynamic Analysis and Control. In: Cheng, K. (eds) Machining Dynamics. Springer Series in Advanced Manufacturing. Springer, London. https://doi.org/10.1007/978-1-84628-368-0_3
Download citation
DOI: https://doi.org/10.1007/978-1-84628-368-0_3
Publisher Name: Springer, London
Print ISBN: 978-1-84628-367-3
Online ISBN: 978-1-84628-368-0
eBook Packages: EngineeringEngineering (R0)