Advances in Construction and Development

1. Front Matter

   Pages i-xiii

   PDF

2. Architecture and Urbanism

   1. Front Matter

      Pages 1-1

      PDF

   2. To the Question of the Development of Construction of High-Rise Buildings in Russia

      • E. M. Mikryukova, I. A. Nikolaev

      Pages 3-10

3. Calculation and Design of Building Structures

   1. Front Matter

      Pages 11-11

      PDF

   2. Analysis of the Ultimate Loading on Concrete Beams in FEMAP NX Nastran

      • A. V. Alekseytsev, M. D. Antonov

      Pages 13-20

   3. Nonlinear Analysis of Damaged Reinforced Concrete Columns, Restored with Carbon Fiber Jacket Using ABAQUS

      • Gamal Algnde, Alexander Topilin

      Pages 21-33

   4. Spherical Domes of Paired Arches of the Same Radius

      • Vasilij D. Antoshkin, Maria V. Gorina

      Pages 35-42

   5. On the Question of Protection from Progressive Collapse

      • S. D. Bartenev, V. V. Bobrov

      Pages 43-48

   6. Development, Strength Check, Calculation of the Wind Load of a Multi-layer Guarding Structure

      • M. A. Bakhmisova, Alexey N. Plotnikov, L. A. Sakmarova, M. V. Petrov

      Pages 49-54

   7. Strength and Deformation of Caisson-Type Floor Plates. Experimental Research and Calculation

      • Arkady Vulfovich Granovsky, Kirill Alekseevich Prusov

      Pages 55-62

   8. To the Calculation of Reinforced Concrete Beams According to the Deformation Model

      • Dmitry Zamelin, Ivan Manaenkov

      Pages 63-70

   9. Anchorage Strength of Post-installed Reinforcement

      • S. I. Ivanov

      Pages 71-78

   10. Distribution of Vertical Stresses in Multi-storey Buildings Under Influence of Nonliner Shear Bonds Deformation

       • V. A. Lyublinskiy, K. Alzaibak, Kh. Alwaz

       Pages 79-86

   11. Erection of Flat Shells of Positive Gaussian Curvature Made from High-Strength Sand Concrete and Its Economic Efficiency

       • Nikolay Palagin, Georgy Nikitin, Aisylu Sadrutdinova

       Pages 87-100

   12. Relationship of Shear Force and Punching Analysis of Reinforced Concrete Slabs

       • D. A. Pekin

       Pages 101-111

   13. Modeling the Bearing Capacity of Tank Trucks Filled with Bulk Material in Bending

       • M. V. Petrov, E. G. Gonik

       Pages 113-120

   14. Rearing Capacity of Reinforced Masonry Under Central Compression Based on the Deformation Parameters of Its Components

       • Alexey N. Plotnikov, Tatyana Vyacheslavovna Romanova, Boris Vasilievich Mikhailov, Olga Stanislavovna Yakovleva, Mikhail Yurievich Ivanov

       Pages 121-134

   15. Criteria for Special Limiting State of Eccentrically Compressed Members of RC Frames

       • Sergey Savin

       Pages 135-146

   16. Problems of Accounting for External Reinforcement in the Nonlinear Calculation of Normal Cross Sections of Bent Reinforced Concrete Elements

       • O. A. Simakov, D. V. Fuchizhi

       Pages 147-154

   17. Traditional Measurements in Experiments on Determination of Mechanical Properties Materials and Nuances for Composites

       • Alexander Anatolyevich Treshchev

       Pages 155-167

 
This book contains the materials of the Conference "Construction and Development: Life Cycle-2020" (CDLC-2020), held at Chuvash State University, Russia. The content of this volume is devoted to improving methods for calculating building structures, strengthening them and assessing their suitability for use, monitoring buildings, improving building technologies, geotechnics, energy efficiency of building envelopes and energy systems, introducing new structures and materials, and economic assessment of construction. It also consists of test data for load-bearing building structures. This volume will prove to be a valuable resource for those in academia and industry. 

• Load-Bearing Structures
• Monitoring of Buildings and Structures
• Calculation of Structures
• Reinforced Concrete Structures
• Composite Materials
• CDLC20

• Civil Engineering, Peter the Great St. Petersburg Polytechnic University, Saint Petersburg, Russia

  Nikolai I. Vatin

• Civil Engineering, Moscow State University, Moscow, Russia

  Ashot G. Tamrazyan

• Civil Engineering, Chuvash State University, Cheboksary, Russia

  Alexey N. Plotnikov

• Department of Civil Engineering, Belarusian National Technical University, Minsk, Belarus

  Sergei N. Leonovich

• Faculty of Civil Engineering, Riga Technical University, Riga, Latvia

  Leonids Pakrastins

• Department of Science and Innovation, Tajik Technical University, Dushanbe, Tajikistan

  Ahmadjon Rakhmonzoda

Nikolai Ivanovich Vatin received his Ph.D. in Technical Sciences in 1986, and was awarded Ph.D. in Technical Sciences, and in 2001 was awarded an academic degree, Doctor of Science (Engineering). He is currently a professor at Peter the Great Saint-Petersburg Polytechnic University. He has held positions such as Deputy Head of Department, Assistant Professor, Head of Department of Economy, Professor, Head of Department (since 2000), Dean, Director of the Institute of Civil Engineering (since 2013 up to 2018), and Professor (since 2018). His research interests include durability and safety of concrete and mortars, reliability of building structures, fiber-reinforced concrete. He is the editor-in-chief of three journals, and his papers have been published in proceedings of national and international prominence.   

  

Ashot Georgievich Tamrazyan qualified as a civil engineer in 1974 from the Yerevan Polytechnic University, Armenia. He received his Ph.D. in Engineering Sciences in 1983 from the National Research Moscow State University of Civil Engineering (NRU MGSU), Russia, and in 1998 he defended his doctoral dissertation at the same university. He has been a professor since 1999. Head of the Department of Reinforced Concrete and Stone Structures, NRU MGSU. He also has been an academician of the Russian Academy of Engineering since 2005, and an advisor to the Russian Academy of Architecture and Construction Sciences since 2004. He was awarded as a laureate of the Government of the Russian Federation Prize in Science and Technology in  2017. His research interests include building structures, buildings and structures, ensuring the reliability and safety of reinforced concrete structures under extreme natural and man-made impacts, etc.

 

 

Alexey Nikolaevich Plotnikov graduated from the Chuvash State University with a degree in Industrial and Civil Engineering in 1983. He receivedhis PhD in 2013 from the National Research Moscow State University of Civil Engineering. From 2014 to 2018, he headed the department of building structures at the Chuvash State University. Dean of the Faculty of Civil Engineering of the Chuvash State University. Research interests: research in the field of automatic monitoring of buildings (SHM), non-linear work of reinforced concrete, resistance of masonry. Member of the board of the Ministry of Construction, Architecture and Housing and Communal Services of the Chuvash Republic. Head of the conference "New in architecture, design of building structures and reconstruction"; "Construction and development: life cycle (CDLC)". Awarded with the Certificate of Honor of the Ministry of Education and Science of the Russian Federation, the Certificate of Honor of the Ministry of Construction of the Chuvash Republic, the Ministry of Transport of the Chuvash Republic.

 

Sergei Nikolaevich Leonovich received his Ph.D. degree in 1989 from the Belarusian Polytechnic University. He received his Doctor of Science degree in 2000. He is currently the Dean of the Faculty of Civil Engineering of the Belarusian National Technical University, Professor of the Department of Building Materials and Construction Technology. He also is involved as a foreign academician of the Russian Academy of Architecture and Construction Sciences, co-chairman of the working group of the RILEM Technical Committee, and member of the Belarusian Academy of Architecture and Engineering Academy. His research interests include strength and crack resistance of structural building materials under a complex stress state, strength, crack resistance and durability of structural concrete under temperature and humidity influences, predicting the durability of structural concrete under aggressive influences. He has been awarded with state awards of Belarus, Man of the Year, American Bibliographical Institute - 2010. 

 

Leonids Pakrastins received his Ph.D. in Structural Engineering from the Faculty of Civil Engineering, Riga Technical University, Latvia in  2005. He is currently the director of the Structural Engineering and Reconstruction Institute, Faculty of Civil Engineering, and Head of the Department of Structural Engineering of Riga Technical University, Latvia. His research interests include long-term thermal deformation of cement compositions, high performance fiber-reinforced concrete, numerical modeling of building structures, including those reinforced during reconstruction. He is a member of the RTU Promotion Council “RTU P – 06” Civil Engineering; Transport and Traffic Science and other scientific committees. He also heads the Latvian standardization technical committee LVS / STK30 “Construction” and is the co-founder of the Latvian Association of Structural Designers. In 2013, he was awarded the title “Excellence in Teaching and Research” at Riga Technical University. 

 

Ahmadjon Jamolidin Rakhmonzoda graduated the Tajik Technical University with a degree in Industrial and Civil Engineering in 2010. He received his Ph.D. in Architecture and Civil Engineering from Kazan State University in 2015. His research interests include monitoring of buildings and structures, non-linear work of reinforced concrete, use of composite reinforcement, research on the loss of pre-stressed elements among others. Since 2016, he is responsible for the scientific research and science of TTU, aimed to solving the complex of tasks for creating and supporting the activities of the system of effective use of the scientific potential of the University. He is the corresponding member of the Engineering Academy of the Republic of Tajikistan, 2017. He was also awarded the Ismoil Somoni State Prize in the field of technical sciences, 2018. 

 

Policies and ethics