Skip to main content
SpringerLink
Log in

Design Tools and Methods in Industrial Engineering III

Proceedings of the Third International Conference on Design Tools and Methods in Industrial Engineering, ADM 2023, September 6–8, 2023, Florence, Italy, Volume 1

  • Conference proceedings
  • © 2024

Overview

Editors:
  1. Monica Carfagni

    1. Department of Industrial Engineering, University of Florence, Florence, Italy

    View editor publications

    You can also search for this editor in PubMed   Google Scholar

  2. Rocco Furferi

    1. Department of Industrial Engineering, University of Florence, Florence, Italy

    View editor publications

    You can also search for this editor in PubMed   Google Scholar

  3. Paolo Di Stefano

    1. Department of Industrial and Information Engineering and Economics, University of L'Aquila, L’Aquila, Italy

    View editor publications

    You can also search for this editor in PubMed   Google Scholar

  4. Lapo Governi

    1. Department of Industrial Engineering, University of Florence, Florence, Italy

    View editor publications

    You can also search for this editor in PubMed   Google Scholar

  5. Francesco Gherardini

    1. Department of Engineering “Enzo Ferrari”, University of Modena and Reggio Emilia, Modena, Italy

    View editor publications

    You can also search for this editor in PubMed   Google Scholar

  • Reports on cutting-edge modelling, simulation and optimization tools
  • Describes advanced engineering methods applied to product, process and systems design
  • First volume of a 2-volume set

Part of the book series: Lecture Notes in Mechanical Engineering (LNME)

Included in the following conference series:

Conference proceedings info: ADM 2023.

This is a preview of subscription content, log in via an institution to check access.

Access this book

Log in via an institution
eBook USD 149.00
Price excludes VAT (USA)
  • Available as EPUB and PDF
  • Read on any device
  • Instant download
  • Own it forever
Softcover Book USD 199.99
Price excludes VAT (USA)
  • Compact, lightweight edition
  • Dispatched in 3 to 5 business days
  • Free shipping worldwide - see info

Tax calculation will be finalised at checkout

Other ways to access

Licence this eBook for your library

Institutional subscriptions

Table of contents (65 papers)

  1. Front Matter

    Pages i-xxii
    Download chapter PDF

  2. Design for Additive Manufacturing

    1. Front Matter

      Pages 1-1
      Download chapter PDF

    2. FDM Printing Time Prediction Tuning Through a DOE Approach

      • Antonio Bacciaglia, Alessandro Ceruti, Francesco Ciccone, Alfredo Liverani
      Pages 3-12

    3. Comparative Assessment of Simulation Tools in Design for Additive Manufacturing Process

      • Alessio Zanini, Marco Marconi, Marco Mandolini
      Pages 13-20

    4. Investigation About the Impact of Nozzle and Chamber Temperatures and Infill Orientation on the Mechanical Behavior of 3D Printed PEEK Specimens

      • Alessandro Greco, Raffaele Sepe, Salvatore Gerbino
      Pages 21-30

    5. Assessment of the Achievable Dimensional Tolerances in 17-4PH Stainless Steel Parts Fabricated by Metal Binder Jetting

      • M. Zago, I. Cristofolini
      Pages 31-40

    6. Effects of Printing Speed and Thermal Post-processing Treatments on the Mechanical Properties of PEEK Processed by Fused Deposition Modeling

      • Francesco Tamburrino, Beatrice Aruanno, Alessandro Paoli, Armando Viviano Razionale
      Pages 41-49

    7. Designing a 3D Printed Personal Protective Equipment for a Binocular Indirect Ophthalmoscopy

      • Puggelli Luca, Giansanti Fabrizio, Volpe Yary, Buonamici Francesco
      Pages 50-57

    8. FDM Technology: Overhangs versus Layer Height Printability Performance Correlation

      • Giampiero Donnici, P. Ferretti, A. Montalti, D. Francia, Alfredo Liverani
      Pages 58-65

    9. Prototyping a Mechanical Mounting System for the Photogrammetric Use of USB Microscopes

      • Sara Antinozzi, Andrea di Filippo, Sara Morena, Anna Sanseverino, Francesco Villecco
      Pages 66-76

    10. Design of Additive Manufactured Devices with Tailored Properties: Tackling Biomedical Challenges

      • Ida Papallo, Antonio Gloria, Massimo Martorelli
      Pages 77-83

    11. Additively Manufactured Lattice-Based Structures for Aeronautical Applications

      • D. Tumino, G. Mantegna, C. R. Vindigni, C. Orlando, A. Alaimo
      Pages 84-92

    12. Concurrent Product and Process Design of an Additively Manufactured Engine Piston

      • Enrico Dalpadulo, Fabio Pini, Francesco Leali
      Pages 93-100

    13. Surface Roughness Prediction in Fused Deposition Modeling: An Engineered Model

      • Chiara de Crescenzo, Maria Richetta, Ida Papallo, Pierpaolo Fucile, Massimo Martorelli, Antonio Gloria et al.
      Pages 101-108

    14. Machine Learning Trends in Design for Additive Manufacturing

      • Michele Trovato, Luca Belluomo, Michele Bici, Francesca Campana, Paolo Cicconi
      Pages 109-117

  3. Engineering Methods in Medicine

    1. Front Matter

      Pages 119-119
      Download chapter PDF

    2. A Fully Automated Procedure for the Creation of Digital Patient-Specific Surgical Guides for Ear Reconstruction

      • Elisa Mussi, Michaela Servi, Flavio Facchini
      Pages 121-128

    3. Manufacturing of Multilayer Replicas of Human Costal Cartilage for Realistic Medical Planning

      • Michaela Servi, Elisa Mussi, Monica Carfagni, Kathleen McGreevy, Flavio Facchini
      Pages 129-137

    4. 3D Printing Methods in Medicine: The Case of an Aortic Section

      • Giulia Alessandri, Gian Maria Santi, Leonardo Frizziero, Alfredo Liverani
      Pages 138-145

    5. Preliminary Study of a 3D-Printed High-Fidelity Simulator for the Training on the EBUS TBNA Procedure

      • Marta Mencarelli, Luca Puggelli, Rocco Furferi, Antonio Marzola
      Pages 146-153
Back to top

Other volumes

  1. Design Tools and Methods in Industrial Engineering III

  2. Design Tools and Methods in Industrial Engineering III

Keywords

About this book

This book gathers original peer-reviewed papers reporting on innovative methods and tools in design, modeling, simulation and optimization, and their applications in engineering design, manufacturing, and other relevant industrial sectors. Based on contributions to the Third International Conference on Design Tools and Methods in Industrial Engineering, ADM 2023, held on September 6–8, 2023, in Florence, Italy, and organized by the Italian Association of Design Methods and Tools for Industrial Engineering, and the Department of Industrial Engineering of the University of Florence, this first volume of a 2-volume set focuses on advances in design for additive manufacturing, engineering methods in medicine, user-centred design, and industrial design and ergonomics. Further topics include design for sustainability, engineering education, experimental methods for product development, and advanced methods for   product and process design. This book provides academicsand professionals with a timely overview and extensive information on trends and technologies in industrial design and manufacturing. 

Editors and Affiliations

  • Department of Industrial Engineering, University of Florence, Florence, Italy

    Monica Carfagni, Rocco Furferi, Lapo Governi

  • Department of Industrial and Information Engineering and Economics, University of L'Aquila, L’Aquila, Italy

    Paolo Di Stefano

  • Department of Engineering “Enzo Ferrari”, University of Modena and Reggio Emilia, Modena, Italy

    Francesco Gherardini

Bibliographic Information

  • Book Title: Design Tools and Methods in Industrial Engineering III

  • Book Subtitle: Proceedings of the Third International Conference on Design Tools and Methods in Industrial Engineering, ADM 2023, September 6–8, 2023, Florence, Italy, Volume 1

  • Editors: Monica Carfagni, Rocco Furferi, Paolo Di Stefano, Lapo Governi, Francesco Gherardini

  • Series Title: Lecture Notes in Mechanical Engineering

  • DOI: https://doi.org/10.1007/978-3-031-52075-4

  • Publisher: Springer Cham

  • eBook Packages: Engineering, Engineering (R0)

  • Copyright Information: The Editor(s) (if applicable) and The Author(s), under exclusive license to Springer Nature Switzerland AG 2024

  • Softcover ISBN: 978-3-031-52074-7Published: 06 February 2024

  • eBook ISBN: 978-3-031-52075-4Published: 06 February 2024

  • Series ISSN: 2195-4356

  • Series E-ISSN: 2195-4364

  • Edition Number: 1

  • Number of Pages: XXII, 595

  • Number of Illustrations: 39 b/w illustrations, 263 illustrations in colour

  • Topics: Engineering Design, Industrial and Production Engineering, User Interfaces and Human Computer Interaction

Publish with us

Policies and ethics

Back to top

Search

Navigation