Advances in Production and Industrial Engineering

1. Front Matter

   Pages i-xii

   PDF

2. Effect of Angular Orientation of Continuous Fibers on the Extensional Properties of Carbon Fiber Composites

   • Joginder Singh, M. R. Tyagi

   Pages 1-15

3. Simulation of Nanowires on c-Si Surface for Reflectance Reduction

   • Arka Bera, Sourav Nag, Arjyajyoti Goswami

   Pages 17-25

4. Investigation of Surface Roughness of Miniature Spur Gears Fabricated Using WEDM by RSM Approach

   • Vyom Singh, Abhishek Patel, Ashish Goyal, Anand Pandey, Ravikant Gupta, Rahul Goyal

   Pages 27-38

5. Multi-objective Analysis of Nd-YAG Laser Welding on Dissimilar Metals

   • Dhruv Bhatt, Ashish Goyal, Vyom Singh

   Pages 39-51

6. Fabrication and Tensile Testing of DHAK Fiber Reinforced Polyester Composites

   • Partha Pratim Das, Gorrepati Srinivasa Rao, Eswara Krishna Mussada, Gadudasu Babu Rao, Bhupendra Prakash Sharma, Umesh Kumar Vates

   Pages 53-61

7. Determination of Safety Stock in Divergent Supply Chains with Non-stationary Demand Process

   • A. M. Ranjith, V. Madhusudanan Pillai

   Pages 63-73

8. Solving Unequal Area Facility Layout Problems with Flexible Bay Structure by Simulated Annealing Algorithm

   • Irappa Basappa Hunagund, V. Madhusudanan Pillai, U. N. Kempaiah

   Pages 75-101

9. Mechanical Characterization of Polycarbonate-Graphene Oxide (PCG) Nanocomposite

   • Jaskaran Singh, Suneev Anil Bansal, Amrinder Pal Singh

   Pages 103-110

10. Comparative Experimental Analysis of Machining Parameters for Inconel 825 on Cryogenic Treatment

    • Shivaji Vithal Bhivsane, Arvind L. Chel

    Pages 111-123

11. Optimizing Gas Injection Stir Casting Process Parameters for Improving the Ultimate Tensile Strength of Hybrid Mg/(SiCp + Al2O3p + Grp) Through Taguchi Technique

    • Jaspreet Hira, Alakesh Manna, Pushpinder Kumar, Rohit Singla

    Pages 125-135

12. Microstructural Characterization of Aluminium Alloy 6061 Powder Deposit Made by Friction Stir Based Additive Manufacturing

    • Akash Mukhopadhyay, Probir Saha

    Pages 137-146

13. Service Quality—A Case Study on Selected Hotels in Goa

    • Vallabh S. Prabhu Gaunker, Rajesh S. Prabhu Gaonkar

    Pages 147-159

14. Influence of Nozzle Distance on Tool–Chip Interface Temperature Using Minimum Quantity Lubrication

    • Gurpreet Singh, Vivek Aggarwal, Sehijpal Singh, Ajay Kumar

    Pages 161-176

15. Investigation of Kerf Characteristics Using Abrasive Water Jet Cutting of Floor Tile: A Preliminary Study

    • Ramesh Chand, Vishal Gupta, N. K. Batra, M. P. Garg

    Pages 177-185

16. Effects of Process Parameters on Surface Roughness, Dimensional Accuracy and Printing Time in 3D Printing

    • Rajat Jain, Shivansh Nauriyal, Vishal Gupta, Kanwaljit Singh Khas

    Pages 187-197

17. Optimization of Process Parameters on MRR During Face Milling of Rolled Steel (AISI1040) Using Taguchi Method

    • Kulwinder Singh, Anoop Kumar Singh, K. D. Chattopadhyay

    Pages 199-208

18. A New Permanent Magnet Type Magnetorheological Finishing Tool for External Cylindrical Surfaces Having Different Outer Diameter

    • Ajay Singh Rana, Talwinder Singh Bedi, Vishwas Grover

    Pages 209-217

19. Influence of Nanoparticle Addition (TiO2) on Microstructural Evolution and Mechanical Properties of Friction Stir Welded AA6061-T6 Joints

    • Tanvir Singh, S. K. Tiwari, D. K. Shukla

    Pages 219-228

20. An Analysis on the Advanced Research in Additive Manufacturing

    • Gautam Chandra Karar, Ratnesh Kumar, Somnath Chattopadhyaya

    Pages 229-277

This book comprises the select proceedings of the International Conference on Emerging Trends in Mechanical and Industrial Engineering (ICETMIE) 2019. The conference covers current trends in thermal, design, industrial, production and other sub-disciplines of mechanical engineering. This volume focuses on different industrial and production engineering areas such as additive manufacturing, rapid prototyping, computer aided engineering, advanced manufacturing processes, manufacturing management and automation, sustainable manufacturing systems, metrology, manufacturing process optimization, operations research and decision-making models, production planning and inventory control, supply chain management, and quality engineering. The contents of this book will be useful for students, researchers and other professionals interested in industrial and production engineering.

• Additive Manufacturing
• Rapid Prototyping
• Computer Aided Engineering
• Manufacturing Management and Automation
• Sustainable Manufacturing Systems
• Metrology
• Manufacturing Process Optimization
• Operations Research
• Supply Chain Management
• ICETMIE 2019
• Engineering Economics
• quality control, reliability, safety and risk

• Department of Mechanical Engineering, Indian Institute of Technology Delhi, New Delhi, India

  P. M. Pandey

• Department of Mechanical Engineering, Indian Institute of Technology Roorkee, Roorkee, India

  Pradeep Kumar

• Department of Mechanical Engineering, The NorthCap University, Gurgaon, India

  Vikas Sharma

Dr. Pulak Mohan Pandey is currently professor at the Department of Mechanical Engineering, IIT Delhi. He obtained his B. Tech from HBTI, Kanpur and M. Tech and PhD from Indian Institute of Technology Kanpur. His major areas of research interests include Additive Manufacturing/ 3D Printing and Tooling, CAD/CAM, Non-traditional Machining and Finishing, FEA of Manufacturing Processes, Biomedical application of 3D Printing. He has published 149 research papers in respected international journals and more than 45 papers in International and National Conferences. Dr. Pandey is currently editor-in-chief and authors of many well renowned books. He has more than 4008 citations with h-index: 30.


Dr. Pradeep Kumar is currently a professor at the Department of Mechanical & Industrial Engineering, Indian Institute of Technology, Roorkee. He had obtained Bachelor of Engineering in Industrial Engineering and Master of Engineering in Production Engineering (Gold Medalist) and Ph.D. Manufacturing and Production Engineering from University of Roorkee (Now, IIT Roorkee). He also served the Delhi Technological University as Vice Chancellor. He has been honored as eminent mechanical engineer for his contribution in the field of mechanical engineering by The Institution of Engineers (India). Dr. Kumar has supervised more than 38 PhD in the field of industrial and mechanical engineering. He has published several research papers in reputed international journals and conferences.


Dr. Vikas Sharma is currently assistant professor at the Mechanical Engineering Department, The NorthCap University, Gurugram, Haryana, India. He graduated in 2007 with a bachelor of mechanical engineering from Kurukshetra University. He post-graduated in CAD/CAM & Robotics from Thapar University, Patiala 2010. Dr. Sharma earned a PhD, in Laser Machining/Composite Materials from Thapar University, Patiala in 2017. His general area of research includes Laser Beam Machining, Optimization Techniques, Composite materials, FEM, Advanced Casting Methods, Additive Manufacturing. He has several peer-reviewed international and national journal publications and conference proceedings. Dr. Sharma is currently reviewer of many renowned Journals like Elsevier, Springer, Sage, etc. He has also published two patents in field of mechanical and bio-mechanical engineering.