Overview
Helps in design, procurement and operation of winding machines
Illustrates the complete winding process with more than 100 detailed presentations
Covers the theoretical and practical aspects of coil winding technology
Offers many tips and suggestions for a production-friendly product design
Access this book
Tax calculation will be finalised at checkout
Other ways to access
Table of contents (4 chapters)
Keywords
About this book
This book presents the current coil winding methods, their associated technologies and the associated automation techniques. From the introduction as a forming joining process, over the physical properties of coils, the semifinished products (wire, coil body, insulation) are introduced. In the process chain, different winding methods are used for magnet wire winding. Finally, the automation of these processes is described.
Editors and Affiliations
About the editors
Dipl.-Ing. Jürgen Hagedorn has about 30 years of professional experience in coil winding technology. Since 2002, he has been working on the process development at Aumann GmbH.
Dr.-Ing. Florian Sell-Le Blanc has been the head of pre-development at Aumann GmbH since 2016. From 2011 to 2015 he was an academic assistant in the Department of Machines, Systems and Process Automation at the Karlsruhe Institute of Technology (KIT).
Prof. Dr.-Ing. Jürgen Fleischer has been the head of the Institute of Production Science since 2003 at KIT. Previously he worked in different management positions in research and development, planning and production at Daimler-Benz, ABB Daimler-Benz Transportation and as a President Regional and Commuter Trains at Bombardier Transportation. From 2008 until he was the Chairman of the Executive Board of the international Machine Tool Group MAG Industrial Automation Systems during a sabbatical from his academic position.Bibliographic Information
Book Title: Handbook of Coil Winding
Book Subtitle: Technologies for efficient electrical wound products and their automated production
Editors: Jürgen Hagedorn, Florian Sell-Le Blanc, Jürgen Fleischer
DOI: https://doi.org/10.1007/978-3-662-54402-0
Publisher: Springer Vieweg Berlin, Heidelberg
eBook Packages: Engineering, Engineering (R0)
Copyright Information: Springer-Verlag GmbH Germany 2018
Hardcover ISBN: 978-3-662-54401-3Published: 11 August 2017
Softcover ISBN: 978-3-662-57195-8Published: 11 September 2018
eBook ISBN: 978-3-662-54402-0Published: 24 July 2017
Edition Number: 1
Number of Pages: IX, 299
Number of Illustrations: 150 illustrations in colour
Topics: Power Electronics, Electrical Machines and Networks, Industrial and Production Engineering, Robotics and Automation, Automotive Engineering