Precision Assembly Technologies and Systems

6th IFIP WG 5.5 International Precision Assembly Seminar, IPAS 2012, Chamonix, France, February 12-15, 2012. Proceedings

  • Editors
  • Svetan Ratchev
Conference proceedings IPAS 2012

Part of the IFIP Advances in Information and Communication Technology book series (IFIPAICT, volume 371)

Table of contents

  1. Front Matter
  2. Micro Assembly Processes and Systems

    1. Jacob W. Chesna, Stuart T. Smith, D. J. Hastings, Borja de la Maza, Bartoz K. Nowakowski, Feilong Lin
      Pages 1-8
    2. Jens Taprogge, Felix Beyeler, Alexander Steinecker, Bradley J. Nelson
      Pages 28-35
    3. Matthias Burgard, Norbert Schläfli, Uwe Mai
      Pages 36-41
    4. Matthias Mohaupt, Erik Beckert, Thomas Burkhardt, Marcel Hornaff, Christoph Damm, Ramona Eberhardt et al.
      Pages 42-50
  3. Handling and Manipulation in Assembly

    1. Timo Prusi, Riku Heikkilä, T. H. Ha, J. Y. Song, C. W. Lee, Reijo Tuokko
      Pages 57-64
    2. Serena Ruggeri, Gianmauro Fontana, Claudia Pagano, Irene Fassi, Giovanni Legnani
      Pages 65-72
    3. Philipp Blumenthal, Annika Raatz
      Pages 73-80
    4. Hendra Prima Syahputra, Hyeon Mo Yang, Byeong Mook Chung, Tae Jo Ko
      Pages 81-88
    5. Christian Belly, Mathieu Bagot, Frank Claeyssen
      Pages 89-96
  4. Tolerance Management and Error Compensation Methods

    1. Rainer Müller, Martin Esser, Christian Janßen, Matthias Vette, Stefan Quinders
      Pages 97-104
    2. Christian Löchte, Jamal Kayasa, Christoph Herrmann, Annika Raatz
      Pages 118-125
  5. Metrology and Quality Control

    1. Asser Vuola, Reijo Tuokko
      Pages 126-133
    2. Giuseppe Zamuner, Jacques Jacot
      Pages 134-143
    3. Rik Lafeber, Gerrit van den Bosch, Max Murre, Jitze Bassa, Leo van Moergestel, Erik Puik
      Pages 144-153
  6. Intelligent Control of Assembly Systems

    1. Minna Lanz, Eeva Järvenpää, Pasi Luostarinen, Fernando Garcia, Reijo Tuokko
      Pages 154-162
    2. Konstantin Konrad, Michael Hoffmeister, Matthias Zapp, Alexander Verl, Johannes Busse
      Pages 163-174
    3. Robert Oates, Daniele Scrimieri, Svetan Ratchev
      Pages 175-182
  7. Process Selecting and Modelling Techniques

    1. Kwabena Agyapong-Kodua, Svetan Ratchev
      Pages 183-190
    2. Daniel Zdebski, Shukri Afazov, Svetan Ratchev, Joel Segal
      Pages 191-199
  8. Back Matter

About these proceedings


This book constitutes the refereed proceedings of the 6th IFIP WG 5.5 International Precision Assembly Seminar, IPAS 2012, held in Chamonix, France, in February 2012. The 15 revised full papers were carefully reviewed and selected from numerous submissions. The papers are organized into the following topical sections: micro processes and systems; handling and manipulation in assembly; tolerance management and error compensation methods; metrology and quality control; intelligent control of assembly systems; and process selection and modelling techniques.


autonomous system holonic manufacturing system micro production system simulation modeling technological interfaces

Bibliographic information

  • DOI
  • Copyright Information IFIP International Federation for Information Processing 2012
  • Publisher Name Springer, Berlin, Heidelberg
  • eBook Packages Computer Science Computer Science (R0)
  • Print ISBN 978-3-642-28162-4
  • Online ISBN 978-3-642-28163-1
  • Series Print ISSN 1868-4238
  • Series Online ISSN 1861-2288
  • Buy this book on publisher's site