Advertisement

Advances in Design, Simulation and Manufacturing III

Proceedings of the 3rd International Conference on Design, Simulation, Manufacturing: The Innovation Exchange, DSMIE-2020, June 9-12, 2020, Kharkiv, Ukraine – Volume 1: Manufacturing and Materials Engineering

  • Vitalii Ivanov
  • Justyna Trojanowska
  • Ivan Pavlenko
  • Jozef Zajac
  • Dragan Peraković
Conference proceedings DSMIE 2020
  • 12k Downloads

Part of the Lecture Notes in Mechanical Engineering book series (LNME)

Table of contents

  1. Front Matter
    Pages i-xx
  2. CAx Technologies for Product Design

    1. Front Matter
      Pages 1-1
    2. Dmytro Adamenko, Steffen Kunnen, Arun Nagarajah
      Pages 3-12
    3. Oleg Akimov, Vitaliy Alyokhin, Kateryna Kostyk, Leonid Saltykov, Julia Riabets
      Pages 13-22
    4. Mykola Korotun, Yuliia Denysenko, Nina Malovana, Olena Dutchenko
      Pages 23-34
    5. Vladimir Nechiporenko, Valentin Salo, Petro Litovchenko, Vladislav Yemanov, Stanislav Horielyshev
      Pages 45-54
    6. Oleh Pihnastyi, Georgii Kozhevnikov, Tetiana Bondarenko
      Pages 55-64
    7. Nataliya Ravska, Alexander Klochko, Oleksiy Ivanovskiy, Vyacheslav Vovk, Valeriya Parnenko
      Pages 65-74
    8. Volodymyr Sokolov, Olga Porkuian, Oleg Krol, Yevhen Baturin
      Pages 75-84
    9. Ihor Yakovenko, Alexander Permyakov, Olena Naboka, Olga Prihodko, Yurii Havryliuk
      Pages 85-93
  3. Smart Manufacturing and Industry 4.0 Strategy

    1. Front Matter
      Pages 95-95
    2. Camelia Avram, Jose Machado, Adina Aştilean
      Pages 97-107
    3. Giampiero Celenta, Domenico Guida
      Pages 108-117
    4. Sergey Dobrotvorskiy, Yevheniia Basova, Ludmila Dobrovolska, Yevgeny Sokol, Nikolay Kazantsev
      Pages 118-127
    5. Bohdan Haidabrus, Serhiy Protsenko, Philipp Rosenberger, Janis Grabis
      Pages 128-136
    6. Pavel Kábele, Milan Edl
      Pages 137-146
    7. Isak Karabegović, Raul Turmanidze, Predrag Dašić
      Pages 147-155
    8. Sergey Kiyko, Evgeniy Druzhinin, Oleksandr Prokhorov, Bohdan Haidabrus
      Pages 156-165
    9. Dragan Peraković, Marko Periša, Petra Zorić, Ivan Cvitić
      Pages 166-175
    10. Mariusz Salwin, Andrzej Kraslawski
      Pages 187-200
    11. Natalya Shramenko, Dmitriy Muzylyov, Vladyslav Shramenko
      Pages 201-209
    12. Sergii Tymchuk, Sergii Shendryk, Vira Shendryk, Ivan Abramenko, Anastasiia Kazlauskaite
      Pages 210-219
    13. José Pedro Vaz, Leonilde Varela, Bruno Gonçalves, José Machado
      Pages 220-230
  4. Technological Assurance

    1. Front Matter
      Pages 231-231
    2. Oleksandr Fomin, Oleksandr Derevianchenko
      Pages 243-252
    3. Vitalii Ivanov, Ivan Dehtiarov, Viliam Zaloga, Illia Kosov, Volodymyr Savchuk
      Pages 264-275
    4. Nataliia Lamnauer, Oleksandr Kupriyanov, Anton Skorkin, Oleg Kondratyuk
      Pages 285-294
    5. Dmytro Lesyk, Silvia Martinez, Oleksii Pedash, Vitaliy Dzhemelinskyi, Bohdan Mordyuk
      Pages 295-304
    6. Fedir Novikov, Vladimir Polyansky, Igor Riabenkov, Andrii Hutorov, Oksana Yermolenko
      Pages 305-314
    7. Alexandr Orgiyan, Vladimir Kobelev, Vitalii Ivanov, Anna Balaniuk, Albakush Aymen
      Pages 315-324
    8. Mykhaylo Stepanov, Maryna Ivanova, Petro Litovchenko, Larysa Ivanova, Alexey Kotliar
      Pages 325-335
    9. Hossein Tohidi, Tarek AlGeddawy
      Pages 336-346
  5. Numerical Simulation and Experimental Studies

    1. Front Matter
      Pages 347-347
    2. Vasyl Chalyj, Sergiy Moroz, Vitaliy Ptachenchuk, Valentyn Zablotskyj, Stanislav Prystupa
      Pages 349-360
    3. Vitalii Chukhlib, Evhen Klemeshov, Serhii Gubskyi, Anton Okun, Nikolay Biba
      Pages 361-370
    4. Gennadii Khavin, Magomedemin Gasanov, Alexander Permyakov, Viktoria Nevludova
      Pages 371-379
    5. Serhii Kononenko, Sergey Dobrotvorskiy, Yevheniia Basova, Ludmila Dobrovolska, Vitalii Yepifanov
      Pages 380-389
    6. Volodymyr Symoniuk, Viktor Denysiuk, Yurii Lapchenko
      Pages 411-421
    7. Natalia Lishchenko, Vasily Larshin, Sergey Uminsky
      Pages 422-431
    8. Oleh Onysko, Volodymyr Kopei, Iuliia Medvid, Lolita Pituley, Tetiana Lukan
      Pages 432-441
    9. Yuliia Salenko, Ruslan Puzyr, Oleksandr Shevchenko, Viktoriia Kulynych, Oleksandr Pedun
      Pages 442-451
    10. Ihor Shepelenko, Yakiv Nemyrovskyi, Yuri Tsekhanov, Sergii Mahopets, Oleh Bevz
      Pages 452-461
    11. Alper Uysal, Eshreb Dzhemilov, Ruslan Dzhemalyadinov
      Pages 462-470

Other volumes

  1. Proceedings of the 3rd International Conference on Design, Simulation, Manufacturing: The Innovation Exchange, DSMIE-2020, June 9-12, 2020, Kharkiv, Ukraine – Volume 2: Mechanical and Chemical Engineering
  2. Advances in Design, Simulation and Manufacturing III
    Proceedings of the 3rd International Conference on Design, Simulation, Manufacturing: The Innovation Exchange, DSMIE-2020, June 9-12, 2020, Kharkiv, Ukraine – Volume 1: Manufacturing and Materials Engineering

About these proceedings

Introduction

This book reports on topics at the interface between manufacturing and materials engineering, with a special emphasis on design and simulation issues. Specifically, it covers the development of CAx technologies for product design, the implementation of smart manufacturing systems and Industry 4.0 strategies, topics in technological assurance, numerical simulation and experimental studies on cutting, milling, grinding, pressing and profiling processes, as well as the development and implementation of new advanced materials. Based on the 3rd International Conference on Design, Simulation, Manufacturing: The Innovation Exchange (DSMIE-2020), held on June 9-12, 2020 in Kharkiv, Ukraine, this first volume in a two-volume set provides academics and professionals with extensive information on the latest trends, technologies, challenges and practice-oriented lessons learned in the above-mentioned areas.

 

Keywords

Advanced Manufacturing Technologies Computer-integrated Design Digital Twin Design Machined Surface Quality Bending Stiffness Probabilistic-Statistical Models in Manufacturing FEM Analysis Models of Durability Functional Safety High-Speed Milling Anti-friction Coating Microcutting Processes Grinding Temperature Thermal Destruction Highly Entropic Alloys Elastic-plastic Behavior Model Friction Hardening Residual Stress Contact Fatigue DSMIE 2020

Editors and affiliations

  • Vitalii Ivanov
    • 1
  • Justyna Trojanowska
    • 2
  • Ivan Pavlenko
    • 3
  • Jozef Zajac
    • 4
  • Dragan Peraković
    • 5
  1. 1.Sumy State UniversitySumyUkraine
  2. 2.Poznan University of TechnologyPoznanPoland
  3. 3.Sumy State UniversitySumyUkraine
  4. 4.Technical University of KosicePresovSlovakia
  5. 5.University of ZagrebZagrebCroatia

Bibliographic information

  • DOI https://doi.org/10.1007/978-3-030-50794-7
  • Copyright Information The Editor(s) (if applicable) and The Author(s), under exclusive license to Springer Nature Switzerland AG 2020
  • Publisher Name Springer, Cham
  • eBook Packages Engineering Engineering (R0)
  • Print ISBN 978-3-030-50793-0
  • Online ISBN 978-3-030-50794-7
  • Series Print ISSN 2195-4356
  • Series Online ISSN 2195-4364
  • Buy this book on publisher's site