Linking Models and Experiments, Volume 2

Proceedings of the 29th IMAC, A Conference on Structural Dynamics, 2011

  • Tom Proulx
Conference proceedings

Part of the Conference Proceedings of the Society for Experimental Mechanics Series book series (CPSEMS)

Table of contents

  1. Front Matter
    Pages i-ix
    PDF
  2. Modal Testing and FE-model Validation of Azimuthing Thruster
    Vesa Nieminen, Matti Tervonen
    Pages 1-18
  3. POD based computation of Joint Interface Modes
    Wolfgang Witteveen, Karim Sherif
    Pages 19-28
  4. Area wise application of contact constraints in reduced mechanical systems
    Wolfgang Witteveen
    Pages 29-35
  5. On the extension of global vibration modes with Ritz-vectors needed for local effects
    Karim Sherif, Wolfgang Witteveen, Hans Irschik, Helmut Holl, Karl Mayrhofer
    Pages 37-46
  6. Direct decoupling of substructures using primal and dual formulation
    Walter D’Ambrogio, Annalisa Fregolent
    Pages 47-76
  7. Spectral analysis of vibrating plates with general shape
    Giuseppe Catania, Silvio Sorrentino
    Pages 77-88
  8. Smoothing experimental data in dynamic substructuring of built up systems
    A. Culla, W. D’Ambrogio, A. Fregolent, A. Schiavone
    Pages 89-109
  9. Metrics for Diagnosing Negative Mass and Stiffness when Uncoupling Experimental and Analytical Substructures
    Mathew S. Allen, Daniel C. Kammer, Randy L. Mayes
    Pages 111-133
  10. Propagation of Free-Interface Substructure Uncertainty into System Test-Analysis Correlation
    Daniel C. Kammer, Sonny Nimityongskul, Dimitri Krattiger
    Pages 135-151
  11. Feature Extraction for Structural Dynamics Model Validation
    Mayuko Nishio, Francois Hemez, Keith Worden, Gyuhae Park, Nobuo Takeda, Charles Farrar
    Pages 153-163
  12. Hybrid Sets of Merged Data for Modal Model Applications
    Louis Thibault, Bruce LeBlanc, Peter Avitabile
    Pages 165-172
  13. Dynamic Uncoupling of a System Model for Component Identification
    David Cloutier, Peter Avitabile
    Pages 173-185
  14. Full Field Dynamic Stress/Strain from Limited Sets of Measured Data
    Pawan Pingle, Peter Avitabile
    Pages 187-200
  15. Limited Experimental Displacement Data used for obtaining Full-Field Dynamic Stress Strain Information
    Pawan Pingle, Peter Avitabile
    Pages 201-217
  16. A Survey of Techniques to Estimate the Uncertainty in Material Parameters
    Todd Simmermacher
    Pages 219-229
  17. Construction of DEM-base Traffic Model Using Optimal Velocity Model
    Takayuki Koizumi, Nobutaka Tsujiuchi, Ryota Akatsuka
    Pages 231-236
  18. Confidence Intervals of Modal Parameters during Progressive Damage Test
    Michael Döhler, Falk Hille, Xuan-Binh Lam, Laurent Mevel, Werner Rücker
    Pages 237-250
  19. Identification of Material Properties of Composite Plates Utilizing Model Updating and Response Surface Techniques
    Kenan Gurses, Bayindir Kuran, Caner Gencoglu
    Pages 251-262
  20. Globally enriched substructuring techniques for vibro-acoustic simulation
    Umut Tabak, Daniel J. Rixen
    Pages 263-280

About these proceedings

Introduction

Linking Models and Experiments, Volume 2. Proceedings of the 29th IMAC, A Conference and Exposition on Structural Dynamics, 2011, the second volume of six from the Conference, brings together 33 contributions to this important area of research and engineering. The collection presents early findings and case studies on fundamental and applied aspects of Structural Dynamics, including papers on Finite Element Techniques, Model Updating, Experimental Dynamics Substructuring, Model Validation, and Uncertainty Quantification.

Keywords

Finite Element Techniques Model Updating, Experimental Dynamics Model Validation Substructuring Uncertainty Quantification

Editors and affiliations

  • Tom Proulx
    • 1
  1. 1.Society for Experimental MechanicsBethelUSA

Bibliographic information

  • DOI https://doi.org/10.1007/978-1-4419-9305-2
  • Copyright Information The Society for Experimental Mechanics, Inc. 2011
  • Publisher Name Springer, New York, NY
  • eBook Packages Engineering
  • Print ISBN 978-1-4419-9304-5
  • Online ISBN 978-1-4419-9305-2
  • Series Print ISSN 2191-5644
  • Series Online ISSN 2191-5652
  • About this book