Advancement in Emerging Technologies and Engineering Applications

  • Chun Lin Saw
  • Tze Keong Woo
  • Salvinder Singh a/l Karam Singh
  • Didi Asmara Bin Salim
Conference proceedings

Part of the Lecture Notes in Mechanical Engineering book series (LNME)

Table of contents

  1. Front Matter
    Pages i-ix
  2. Ismila Che Ishak, Wan Muhammad Hafiz Wan Ab Rani, Shaiful Bakri Ismail, Norazimah Mazlan
    Pages 1-12
  3. Mazlan Muslim, Md Salim Kamil, Asmalina Mohamed Saat
    Pages 13-23
  4. Hamdan Nuruddin, Muhammad Hazwan Azizi, Muhammad Nasuha Mansor, Shaiful Bakri Ismail, Iwan Zamil Mustaffa Kamal
    Pages 25-32
  5. Zulzamri Salleh, M. Islam, J. Epaarachchi, M. Zulkarnain, Yaseen Adenan Ahmed
    Pages 41-47
  6. Aminatul Hawa Yahaya, Muhamad Hazim Muksan
    Pages 49-55
  7. Norfadhlina Khalid, Muhammad Haziq Zulkifli, Nor Hisham Mustafa, Z. Z. Mukhtar
    Pages 57-63
  8. Z. Z. Mukhtar, A. Abu Bakar, A. Fitriadhy, M. S. Abdul Majid, Asmalina Mohamed Saat
    Pages 65-77
  9. Iwan Mustaffa Kamal, Muhammad Safwan Rasahidan, Yaseen Adenan Ahmed
    Pages 79-89
  10. Md Salim Kamil, Mazlan Muslim, Asmalina Mohamed Saat
    Pages 91-100
  11. Thanh Binh Nguyen, Aleksey S. Shelegov, Igor A. Chusov
    Pages 101-108
  12. Khoon-Keat Chow, T. K. Woo, Swee Leong Kok, Kok-Tee Lau, Ali Mohammed Abdal Kadhim
    Pages 109-116
  13. Asmalina Mohamed Saat, Asmawi Abd Malik, Md. Salim Kamil, Mazlan Muslim, Fatin Zawani Binti Zainal Azaim, Adila Azmi et al.
    Pages 117-124
  14. Asmalina Mohamed Saat, Syarmela Alaauldin, Hanisah Johor, Hazwani Mohd Radzi, Fatin Zawani Zainal Azaim, Mohd Saidi Mohd Saad et al.
    Pages 125-132
  15. Subramaniam Krishnan, Ananda Krishna, Amer Nordin, Victor Amirtham, A. M. A. Rani, T. V. V. L. N. Rao
    Pages 133-141
  16. A. Azhar, D. Kamaruzzaman, M. Y. Khairul Azuan
    Pages 143-155
  17. W. M. Dahalan, Norhafizah Othman, Noorazlina Mohamid Salih, Mohd Harkikie Fitri Bin Abdul Karim
    Pages 157-162
  18. Khairul Anuar bin Mat Saad, Ahmad Khairil bin Azman
    Pages 163-173
  19. Mohd Naim Awang, Zakiman Zali, Nor Ashimy Mohd Noor, Ridwan Saputra Nursal
    Pages 175-187
  20. Shahril Jalil, Zamri Yusoff, Hairi Haizri Che Amat, Ridwan Saputra Nursal
    Pages 189-201
  21. M. H. Abd Razak, Nor Ashimy Mohd Noor
    Pages 211-217
  22. S. A. Rashid, M. R. Danuri, Nor Ashimy Mohd Noor
    Pages 219-229
  23. M. A. Mun’aim Idrus, Asmalina Mohamed Saat, Maisarah Mohamed Bazin, Redzuan Zoolfakar
    Pages 231-238
  24. Ahmad Makarimi Abdullah, Khatijah Aisha Yaacob, Zainovia Lockman, Sabar Derita Hutagalung
    Pages 239-253
  25. Mohd Naim Awang, Effi Helmy Ariffin, Arman Ariffin
    Pages 267-273
  26. Norhayati Mohd Zainee, Md Salim Kamil, Norazimah Mazlan, Ismila Che Ishak
    Pages 275-281
  27. Mohd Zaifulrizal Zainol, Ismail Zainol, Alif Akmal Abu Bakar, Mohd Faizal Abd Razak, Redzuan Zoolfakar
    Pages 283-298
  28. Amayrol Zakaria, Aminuddin Md Arof, Ismila Che Ishak, Abdul Qayum Mukti
    Pages 299-303
  29. Chun Lin Saw, Jeefferie Abd. Razak, Azmi Naroh, Mohd Nazrin Nahar, M. Bakhyaraj
    Pages 315-321
  30. M. N. Abdullah, N. F. A. Mohd Azlan, W. M. Dahalan, N. F. Naswan, R. Hamdan, M. N. Ismail
    Pages 323-331
  31. B. A. Baharudin, P. Hussain, M. Mustapha, F. Ayob, A. Ismail, F. Ab Rahman et al.
    Pages 333-338
  32. Ismail Zainol, Z. M. Ahmad, S. N. Ridwan, Z. M. Zaifurizal, M. R. Dahalan, A. Kamal et al.
    Pages 339-349
  33. A. Ismail, M. Awang, M. S. M. Zuhir, F. A. Rahman, B. A. Baharudin, M. K. Puteri Zarina et al.
    Pages 351-360
  34. Didi Asmara Salim, Mohd Amin Abd Majid, Adzuieen Nordin
    Pages 361-368
  35. Adzuieen Nordin, Didi Asmara Salim, Mohamad Asyraf Bin Othoman, Shahrul Nahar Omar Kamal, Danny Tam Hong Khai, Mohd Kamarul Yusri Yusof
    Pages 369-375
  36. Adzuieen Nordin, Zulhikmi Zali, Mohamad Asyraf Bin Othoman, Shahrul Nahar Omar Kamal, Didi Asmara Salim
    Pages 377-383
  37. Abdul Aziz Abdullah, Chun Lin Saw
    Pages 385-391
  38. Wan Masrurah Hairudin, Norilmi Amilia Ismail, Zaidi Mohd Ripin
    Pages 393-398
  39. Mohammed Shihab Patel, Mohd. Shahir Liew, Zahiraniza Mustaffa, Abdurrasheed Said Abdurrasheed, Andrew Whyte
    Pages 399-406
  40. Mohammed Shihab Patel, Mohd. Shahir Liew, Zahiraniza Mustaffa, Abdurrasheed Said Abdurrasheed, Andrew Whyte
    Pages 407-413
  41. L. A. Pangestu, C. Y. Ng, A. E. Kajuputra, M. K. Muzammil, S. Sabtu
    Pages 415-429
  42. Ogboo Chikere Aja, Reuben Brandon Huan Chung Lee, Saw Chun Lin
    Pages 431-442

About these proceedings


This book presents the proceedings of the Regional Conference on Marine and Mechanical Engineering (ReMME'18), organized by Boards of Engineers Malaysia (BEM), ASHRAE Malaysia Chapter, Malaysia Energy Commission. It discusses the expertise, skills, and techniques needed for the development of energy and renewable energy system, new materials and biomaterials, and marine technology. It focuses on finite element, computational fluids dynamics, programming and mathematical methods that are used for engineering simulations, and present many state-of-the-art applications and advances to highlight these methods’ importance. 

For example, modern joining technologies can be used to fabricate new compound or composite materials, even those formed from dissimilar component materials. These composite materials are often exposed to harsh environments, must deliver specific characteristics, and are primarily used in automotive and marine technologies, i.e., ships, amphibious vehicles, docks, offshore structures, and even robots. To achieve the desired material performance, computer-based engineering tools are widely used for simulation, data evaluation, and design. 


ReMME'16 Boards of Engineers Malaysia ASHRAE Malaysia Chapter marine technology hybrid system

Editors and affiliations

  • Chun Lin Saw
    • 1
  • Tze Keong Woo
    • 2
  • Salvinder Singh a/l Karam Singh
    • 3
  • Didi Asmara Bin Salim
    • 4
  1. 1.Department of Mechanical EngineeringPoliteknik Ungku OmarIpohMalaysia
  2. 2.Department of Mechanical EngineeringPoliteknik Ungku OmarIpohMalaysia
  3. 3.Department of Mechanical and Materials EngineeringUniversiti Kebangsaan Malaysia (UKM)BangiMalaysia
  4. 4.Department of Mechanical EngineeringPoliteknik Ungku OmarIpohMalaysia

Bibliographic information

  • DOI
  • Copyright Information Springer Nature Singapore Pte Ltd. 2020
  • Publisher Name Springer, Singapore
  • eBook Packages Engineering Engineering (R0)
  • Print ISBN 978-981-15-0001-5
  • Online ISBN 978-981-15-0002-2
  • Series Print ISSN 2195-4356
  • Series Online ISSN 2195-4364
  • Buy this book on publisher's site