Advertisement

© 2018

Modeling, Analysis and Control of Hydraulic Actuator for Forging

Book

Table of contents

  1. Front Matter
    Pages i-x
  2. Background and Fundamental

    1. Front Matter
      Pages 1-1
    2. Xinjiang Lu, Minghui Huang
      Pages 3-25
  3. Modeling of Forging Loads and Processes

    1. Front Matter
      Pages 27-27
    2. Xinjiang Lu, Minghui Huang
      Pages 51-73
    3. Xinjiang Lu, Minghui Huang
      Pages 75-94
    4. Xinjiang Lu, Minghui Huang
      Pages 111-124
    5. Xinjiang Lu, Minghui Huang
      Pages 125-139
  4. Dynamic Analysis of Forging Processes

    1. Front Matter
      Pages 141-141
    2. Xinjiang Lu, Minghui Huang
      Pages 143-166
    3. Xinjiang Lu, Minghui Huang
      Pages 167-188
  5. Intelligent Control of Complex Forging Processes

    1. Front Matter
      Pages 189-189
    2. Xinjiang Lu, Minghui Huang
      Pages 191-209
    3. Xinjiang Lu, Minghui Huang
      Pages 225-228

About this book

Introduction

This book aims to overcome the current shortcomings of modeling, analysis and control approaches, presenting contributions in three major areas: a) Several novel modeling approaches are proposed: a process/shape-decomposition modeling method to help estimate the deformation force, an online probabilistic learning machine for the modeling of batch forging processes, several data-driven identification and modeling approaches for unknown forging processes under different work conditions. b) The model-based dynamic analysis methods is developed to derive the conditions of stability and creep. c) Several novel intelligent control methods are proposed for complex forging processes.

One of the most serious problems in forging forming involves the inaccurate forging conditions, velocity and position, offered by the hydraulic actuator due to the complexity of both the deformation process of the metal work piece and the motion process of the hydraulic actuator. The current weaknesses of modeling, analysis and control approaches are summarized as follows: a) With the current modeling approaches it is difficult to model complex forging processes with unknown parameters, as they only model the dynamics in local working areas but do not effectively model unknown nonlinear systems across multiple working areas; further, they do not take the batch forging process into account, let alone its distribution modeling. b) All previous dynamic analysis studies simplify the forging system to having a single-frequency pressure fluctuation and neglect the influences of non-linear load force. Further, they fail to take the flow equation in both valves and cylinders into account. c) Conventional control approaches only consider the linear deformation force and pay no attention to sudden changes and the motion synchronization for the multi-cylinder system, making them less effective for complex, nonlinear time-varying forging processes subject to sudden changes.

Keywords

Forging Forming Hydraulic Actuator Modeling of Forging Process Control of Forging Process Dynamic Analysis Data-driven Modeling Intelligent Control Data Learning

Authors and affiliations

  1. 1.State Key Laboratory of High Performance Complex Manufacturing, School of Mechanical and Electrical EngineeringCentral South UniversityChangshaChina
  2. 2.State Key Laboratory of High Performance Complex Manufacturing, School of Mechanical and Electrical EngineeringCentral South UniversityChangshaChina

About the authors

XinJiang Lu received the B.E. and M.E. degrees in the School of Mechanical & Electrical Engineering, Central South University, China, and the Ph.D degree in the Department of Manufacturing Engineering and Engineering Management, City University of Hong Kong. Currently, he is currently a Professor of the School of Mechanical & Electrical Engineering, Central South University. 

Dr. Lu has broad interest in academic as well as applied research. He has published 1 book with John Wiley & Sons in 2014, and published over 30 SCI journal papers and more than 20 conference papers. As PI, he has taken charge of 8 projects. His current research interests are in modeling and control of hydraulic actuator, data learning, process modeling and control, robust design, integration of design and control. 

Dr. Lu serves as one of the Editorial Board Members in both International Journal of Industrial and Manufacturing Systems Engineering and International Journal of Computer & Software Engineering. He was awarded New Century Excellent Talents award by the Chinese Ministry of Education in 2013, Hiwin Doctoral Dissertation Award in 2011, Excellent Thesis Award for Master’s Degree of both Hunan Province and Central South University respectively in 2007 and 2006. He is a member of IEEE. 

The list of the selected publications:

[1]       Lu X.J., Zou W., Huang M.H., A Novel Spatiotemporal LS-SVM Method for Complex Distributed Parameter Systems with Applications to Curing Thermal Process, IEEE Transactions on Industrial Informatics, 12(3), pp.1156 - 1165, 2016.

[2]       Fan B., Lu X.J*., Huang M.H., A Novel LS-SVM Control for Unknown Nonlinear Systems with Application to Complex Forging Process, Journal of Central South University, 2016 (Accepted)

[3]       Fan B., Lu X.J*., Li H.X., Probabilistic Inference based Least Squares Support Vector Machine for Modeling under Noisy Environment, IEEE Trans. Systems, Man, and Cybernetics: Systems, 10.1109/TSMC.2016.2531674, 2016. (Accepted)

[4]       Zhou C., Lu X.J*.,Huang M.H., Dempster-Shafer theory-based robust least squares support vector machine for stochastic modelling, Neurocomputing, 182, pp.145-153i 2016.

[5]       Lu X.J., Zhou C., Huang M.H., Lv W.B. Regularized online sequential extreme learning machine with adaptive regulation factor for time-varying nonlinear system, Neurocomputing, 174,pp.617-626, 2016.

[6]       Lu X.J., Liu C., Huang M.H. Online Probabilistic Extreme Learning Machine for Distribution Modeling of Complex Batch Forging Processes, IEEE Transactions on Industrial Informatics, 11(6), pp.1277-1286, 2015.

[7]       Lu X.J., Zou W., Huang M.H. An adaptive modeling method for time-varying distributed parameter processes with curing process applications, Nonlinear Dynamics, 82(1), pp. 865-876, 2015。

[8]       Lu X.J., Fan B., Huang, M.H. (2015). A Novel LS-SVM Modeling Method for a Hydraulic Press Forging Process with Multiple Localized Solutions, IEEE Transactions on Industrial Informatics, 11(3), pp. 663-670, 2015.

[9]       Lu X.J. , Zou W., Huang M.H., Deng K. (2015).  A process/shape-decomposition modeling method for deformation force estimation in complex forging processes, International Journal of Mechanical Sciences, 90, pp.190-199, 2015.

[10]   Lu X.J. , Huang M.H. (2015). Two-Level Modeling Based Intelligent Integration Control for Time-Varying Forging Processes, Industrial and engineering chemistry research, 54, pp.5690-5696, 2015.

[11]   Lu X.J., Huang M.H., (2015). A Novel Multi-level Modeling Method for Complex Forging Processes on Hydraulic Press Machines, International Journal of Advanced Manufacturing Technology,79(9), pp.1869-1880, 2015.

[12]   Lei J., Lu X.J., Li Y.B., Huang M.H., Zou W., (2015). Approximate-model Based Estimation Method for Dynamic Response of Forging Processes, CHINESE JOURNAL OF MECHANICAL ENGINEERING, 28(3), pp.565-572, 2015.

[13]   Lu X.J. , Li H.X., Huang M.H. (2014).  Data-Driven Robust Design for a Curing Oven, IEEE Trans. on Components, Packaging and Manufacturing Technology, 4(8), pp. 1366-1373, 2014.

[14]   Lu X.J. , Li H.X., Huang M.H. (2014). Stability and robust design using a sector nonlinearity approach for nonlinear manufacturing systems, Mechanism and Machine Theory, 82, pp. 115-127, 2014.

[15]   Lu X.J. , Huang M.H. (2014). A KL/Subspace Modeling Method for Integrated Design and Control in Curing Processes, Industrial and engineering chemistry research, 53, pp. 14377-14384, 2014.

[16]   Lu X.J. , Huang M.H. (2014). A simple online modeling approach for a time-varying forging process, International Journal of Advanced Manufacturing Technology, 75, pp. 1197-1205, 2014

[17]   Lu X.J., Li Y.B., Huang M.H. (2013). Operation-region-decomposition-based SVD/NN Modeling Method for Complex Hydraulic Press Machines, Industrial & Engineering Chemistry Research,52, pp.17221-17228, 2013.

[18]   Lu X.J. & Huang, M.H. (2013). Nonlinear-Measurement-Based Integrated Robust Design and Control for Manufacturing System, IEEE Trans. on Industrial Electronics, 60(7), pp.2711-2720, 2013.

[19]   Lu X.J. & Huang, M.H. (2013). Multi-domain modeling based robust design for nonlinear manufacture system, International Journal of Mechanical Sciences, 75, pp.80-86, 2013.

[20]   Lu X.J. & Huang, M.H. (2012). System decomposition based multi-level control for hydraulic press machine. IEEE Trans. on Industrial Electronics, 59(4), pp. 1080-1087, 2012.

[21]   Lu X.J. & Li, H.-X. (2012). Model based probabilistic robust design with data-based uncertainty compensation for model uncertainty. ASME Trans. on Journal of Mechanical Design, 134(2), pp. 021004, 2012.

[22]   Lu X.J. & Li, H.-X. (2012). Probabilistic robust design for covariance minimization of nonlinear system. Mechanism and Machine Theory, , 52, pp. 195-205, 2012.

[23]   Lu X.J. & Li, H.-X. (2011). Robust Design for Dynamic system under Model Uncertainty. ASME Trans. on Journal of Mechanical Design, 133(2), pp:021006.

[24]   Lu X.J. & Huang, M.H. (2011). Subspace modeling based Nonlinear Measurement for Process Design. Industrial & Engineering Chemistry Research , 50, 13457-13465.

[25]   Lu X.J. Li, H.-X., & Yuan, X. (2010). PSO-based intelligent integration of design and control for a kind of curing process. Journal of process control, 20, 1116-1125

[26]   Lu X.J., Li, H.-X., Chen C. L. (2010). Variable sensitivity based deterministic robust design for nonlinear system. ASME Trans. on Journal of Mechanical Design. 132(6),pp: 064502.

[27]   Lu X.J., Li, H.-X., Chen C. L. (2010). Robust Optimal Design with Consideration of Robust Eigenvalue Assignment. Industrial & Engineering Chemistry Research, 49 (7), pp: 3306–3315.

[28]   Lu X.J., Li, H.-X. *, Duan J.-A., Sun D. (2010). Integrated Design and Control under Uncertainty: A Fuzzy Modeling Approach. Industrial & Engineering Chemistry Research. 49(3), pp:1312–1324.

[29]   Lu X.J. & Li, H.-X. (2009). Perturbation Theory based Robust Design for Model Uncertainty. ASME Trans. on Journal of Mechanical Design. 131(11), pp: 111006.

[30]   Lu X.J. & Li, H.-X. (2009). Stability based Robust Eigenvalue Design for Tolerance. ASME Trans. on Journal of Mechanical Design. 131(8), pp: 081007.

 

MingHui Huang received the B.E., M.E. and Ph.D degrees in the School of Mechanical & Electrical Engineering, Central South University, China. 

Currently, he is a full professor of the School of Mechanical & Electrical Engineering, Central South University. He was awarded both “Chang Jiang Scholar” and New Century Excellent Talents award by the Chinese Ministry of Education, China. His research interests include forging forming, machine design and manufacturing, design theory, fault diagnosis, digital manufacturing. 

The list of the selected publications:

[1]       Lu X.J., Zou W., Huang M.H., A Novel Spatiotemporal LS-SVM Method for Complex Distributed Parameter Systems with Applications to Curing Thermal Process, IEEE Transactions on Industrial Informatics, 12(3), pp.1156 - 1165, 2016.

[2]       lex="" forging="" process,="" journal="" of="" central="" south="" university,="" 2016="" (accepted)

[3]       Zhou C., Lu X.J*.,Huang M.H., Dempster-Shafer theory-based robust least squares support vector machine for stochastic modelling, Neurocomputing, 182, pp.145-153i 2016.

[4]       Lu X.J., Zhou C., Huang M.H., Lv W.B. Regularized online sequential extreme learning machine with adaptive regulation factor for time-varying nonlinear system, Neurocomputing, 174,pp.617-626, 2016.

[5]       Lu X.J., Liu C., Huang M.H. Online Probabilistic Extreme Learning Machine for Distribution Modeling of Complex Batch Forging Processes, IEEE Transactions on Industrial Informatics, 11(6), pp.1277-1286, 2015.

[6]       Lu X.J., Zou W., Huang M.H.^ations, Nonlinear Dynamics, 82(1), pp. 865-876, 2015。

[7]       Lu X.J., Fan B., Huang, M.H. (2015). A Novel LS-SVM Modeling Method for a Hydraulic Press Forging Process with Multiple Localized Solutions, IEEE Transactions on Industrial Informatics, 11(3), pp. 663-670, 2015.

[8]       Lu X.J. , Zou W., Huang M.H., Deng K. (2015).  A process/shape-decomposition modeling method for deformation force estimation in complex forging processes, International Journal of Mechanical Sciences, 90, pp.190-199, 2015.

[9]       Lu X.J. , Huang M.H. (2015). Two-Level Modeling Based Intelligent Integration Control for Time-Varying Forging Processes, Industrial and engineering chemistry research, 54, pp.5690-5696, 2015.

[10]   Lu X.J., Huang M.H., (2015). A Novel Multi-level Modeling Method for Complex Forging Processes on Hydraulic Press Machines, International Journal of Advanced Manufacturing Technology,79(9), pp.1869-1880, 2015.

[11]   Lei J., Lu X.J., Li Y.B., Huang M.H., Zou W., (2015). Approximate-model Based Estimation Method for Dynamic Response of Forging Processes, CHINESE JOURNAL OF MECHANICAL ENGINEERING, 28(3), pp.565-572, 2015.

[12]   Lu X.J. , Li H.X., Huang M.H. (2014).  Data-Driven Robust Design for a Curing Oven, IEEE Trans. on Components, Packaging and Manufacturing Technology, 4(8), pp. 1366-1373, 2014.

[13]   Lu X.J. , Li H.X., Huang M.H. (2014). Stability and robust design using a sector nonlinearity approach for nonlinear manufacturing systems, Mechanism and Machine Theory, 82, pp. 115-127, 2014.

[14]   Lu X.J. , Huang M.H. (2014). A KL/Subspace Modeling Method for Integrated Design and Control in Curing Processes, Industrial and engineering chemistry research, 53, pp. 14377-14384, 2014.

[15]   Lu X.J. , Huang M.H. (2014). A simple online modeling approach for a time-varying forging process, International Journal of Advanced Manufacturing Technology, 75, pp. 1197-1205, 2014

[16]   Lu X.J., Li Y.B., Huang M.H. (2013). Operation-region-decomposition-based SVD/NN Modeling Method for Complex Hydraulic Press Machines, Industrial & Engineering Chemistry Research,52, pp.17221-17228, 2013.

[17]   Lu X.J. & Huang, M.H. (2013). Nonlinear-Measurement-Based Integrated Robust Design and Control for Manufacturing System, IEEE Trans. on Industrial Electronics, 60(7), pp.2711-2720, 2013.

[18]   Lu X.J. & Huang, M.H. (2013). Multi-domain modeling based robust design for nonlinear manufacture system, International Journal of Mechanical Sciences, 75, pp.80-86, 2013.

[19]   Lu X.J. & Huang, M.H. (2012). System decomposition based multi-level control for hydraulic press machine. IEEE Trans. on Industrial Electronics, 59(4), pp. 1080-1087, 2012.

Bibliographic information