Skip to main content
SpringerLink
Log in

Intelligent Fixtures for the Manufacturing of Low Rigidity Components

  • Book
  • © 2018

Overview

Authors:
  1. Hans Christian Moehring

    1. Institute of Manufacturing Technology and Quality Management (IFQ), Otto-von-Guericke-University Magdeburg, Magdeburg, Germany

    View author publications

    You can also search for this author in PubMed   Google Scholar

  2. Petra Wiederkehr

    1. Institute of Machining Technology (ISF), Faculty of Mechanical Engineering, TU Dortmund University, Dortmund, Germany

    View author publications

    You can also search for this author in PubMed   Google Scholar

  3. Oscar Gonzalo

    1. IK4-Tekniker Mechanical Engineering Unit, Eibar, Spain

    View author publications

    You can also search for this author in PubMed   Google Scholar

  4. Petr Kolar

    1. Research Center of Manufacturing Technology (RCMT), Czech Technical University in Prague, Prague, Czech Republic

    View author publications

    You can also search for this author in PubMed   Google Scholar

  • Contains the report of the European Research Project INTEFIX
  • Includes case studies related to vibrations, deformations and positioning
  • Provides a representative overview of the field intelligent fixtures for low rigidity components
  • Includes supplementary material: sn.pub/extras

Part of the book series: Lecture Notes in Production Engineering (LNPE)

This is a preview of subscription content, log in via an institution to check access.

Access this book

Log in via an institution
eBook USD 109.00
Price excludes VAT (USA)
  • Available as EPUB and PDF
  • Read on any device
  • Instant download
  • Own it forever
Softcover Book USD 139.99
Price excludes VAT (USA)
  • Compact, lightweight edition
  • Dispatched in 3 to 5 business days
  • Free shipping worldwide - see info
Hardcover Book USD 139.99
Price excludes VAT (USA)
  • Durable hardcover edition
  • Dispatched in 3 to 5 business days
  • Free shipping worldwide - see info

Tax calculation will be finalised at checkout

Other ways to access

Licence this eBook for your library

Institutional subscriptions

Table of contents (10 chapters)

  1. Front Matter

    Pages i-xxx
    Download chapter PDF

  2. Vibration

    1. Front Matter

      Pages 1-1
      Download chapter PDF

    2. Case Study 1.1: Identification and Active Damping of Critical Workpiece Vibrations in Milling of Thin Walled Workpieces

      • Hans-Christian Möhring, Petra Wiederkehr, Christoph Lerez, Tobias Siebrecht, Holger Schmitz
      Pages 3-23

    3. Case Study 1.2: Turning of Low Pressure Turbine Casing

      • Oscar Gonzalo, Jose Mari Seara, Eneko Olabarrieta, Mikel Esparta, Iker Zamakona, Manu Gomez-Korraletxe et al.
      Pages 25-38

    4. Case Study 1.3: Auto-adaptive Vibrations and Instabilities Suppression in General Milling Operations

      • Lorenzo Sallese, Jason Tsahalis, Niccolò Grossi, Antonio Scippa, Gianni Campatelli, Harry Tsahalis
      Pages 39-55

  3. Deformation

    1. Front Matter

      Pages 57-57
      Download chapter PDF

    2. Case Study 2.1: Detection and Compensation of Workpiece Distortions During Machining of Slender and Thin-Walled Aerospace Parts

      • Hans-Christian Möhring, Petra Wiederkehr, Mathias Leopold, Rouven Hense, Florian Hannesen
      Pages 59-79

    3. Case Study 2.2: Clamping of Thin-Walled Curved Workpieces

      • Petr Kolar, Jiri Sveda, Jan Koubek
      Pages 81-98

    4. Case Study 2.3: Distortions in Aeronautical Structural Parts

      • Iñigo Llanos, Arkaitz Beristain, Jose Luis Lanzagorta, Hendric Matzat
      Pages 99-115

    5. Case Study 2.4: Machining of Aircraft Turbine Support Structures

      • Oscar Gonzalo, Jose Mari Seara, Enrique Guruceta, Mikel Esparta, Iker Zamakona, Nicolas Uterga et al.
      Pages 117-132

  4. Positioning

    1. Front Matter

      Pages 133-133
      Download chapter PDF

    2. Case Study 3.1: Fixture System for Workpiece Adjustment and Clamping with/without its Pre-deformation

      • Jiri Sveda, Petr Kolar, Jan Koubek, Jose de Dios
      Pages 135-149

    3. Case Study 3.2: Semiautomatic Tool Reference for Application on Large Parts

      • Jose Zendoia, Harkaitz Urreta, Alberto Mendikute, Ibai Leizea
      Pages 151-165

    4. Case Study 3.3: Active Fixtures for High Precision Positioning of Large Parts for the Windmill Sector

      • Alex Estévez, Germán Rodríguez, Kepa Ayesta
      Pages 167-180

  5. Back Matter

    Pages 181-183
    Download chapter PDF
Back to top

Keywords

About this book

The book summarizes the results of the European research project "Intelligent fixtures for the manufacturing of low rigidity components" (INTEFIX). The structure of the book follows the sub-projects which are dedicated to case studies within the scenarios "vibrations", "deformations" and "positioning". The INTEFIX project deals with the development and analysis of several exemplary types of intelligent, sensor and actuator integrated fixtures for the clamping of sensitive workpieces in cutting machine tools. Thus, the book gives a representative overview about this innovative field of technology. The demands of the case studies are described and the technological approaches and solutions are introduced. Furthermore, innovative methods for the design and optimization of intelligent fixtures are presented.

Authors and Affiliations

  • Institute of Manufacturing Technology and Quality Management (IFQ), Otto-von-Guericke-University Magdeburg, Magdeburg, Germany

    Hans Christian Moehring

  • Institute of Machining Technology (ISF), Faculty of Mechanical Engineering, TU Dortmund University, Dortmund, Germany

    Petra Wiederkehr

  • IK4-Tekniker Mechanical Engineering Unit, Eibar, Spain

    Oscar Gonzalo

  • Research Center of Manufacturing Technology (RCMT), Czech Technical University in Prague, Prague, Czech Republic

    Petr Kolar

Bibliographic Information

Publish with us

Policies and ethics

Back to top

Search

Navigation