Advertisement

The Latest Methods of Construction Design

  • Vojtěch Dynybyl
  • Ondrej Berka
  • Karel Petr
  • František Lopot
  • Martin Dub
Conference proceedings

Table of contents

  1. Front Matter
    Pages i-xxvi
    PDF

  2. Machine Design

    1. Front Matter
      Pages 1-1
      PDF
    2. A New Stand for Fatigue Testing of Pillars
      L. Barton
      Pages 3-6
    3. HCR Gears in the Industrial Gearbox
      M. Burián, M. Trochta, J. Havlik
      Pages 7-14
    4. Design of the Vibration Separatory Apparatus
      M. Dub, S. Sadek, J. Hendrych, P. Spacek
      Pages 15-18
    5. Designing of Mixing Equipment, Reactors and Bioreactors
      T. Jirout, D. Jiroutova
      Pages 19-26
    6. Modern Trends in the Drive Wheelsets of Rail Vehicles
      J. Kolar
      Pages 27-35
    7. Scale-Up of Equipment for Thermal-Expansionary Pretreatment of Lignocelluloses
      L. Kratky
      Pages 37-43
    8. Should We Teach Polymeric Machine Elements as Well?
      B. Križan
      Pages 45-50
    9. Design of Semi-active Magnetorheological Valve
      M. Kubík, I. Mazůrek
      Pages 51-56
    10. Support Tools in the Development of Bearings for Wind Turbines
      R. Madaj, R. Kohar
      Pages 57-62
    11. Note to an Undercut Limit of Involute Gearing
      M. Nemecek
      Pages 63-68
    12. Assessment of Industrial Design Projects with Use of Online Evaluation System
      M. Ondra, R. Machalek, D. Skaroupka, D. Semrad, F. Uhlir
      Pages 69-74
    13. Vibration Isolation Pneumatic System with a Throttle Valve
      L. Pesik, A. Skarolek, O. Kohl
      Pages 75-79
    14. Development of the Assembly Set for the Logistic Transport Solution
      R. Sásik, M. Haluška, R. Madaj, M. Gregor, P. Grznár
      Pages 81-86
    15. The Design of the Device for the Manufacture of Planar Filter
      L. Sevcik
      Pages 87-91
    16. The Structural Design of Industrial Vacuum Cleaner for Dental Laboratories
      R. Slanina, P. Sniehotta
      Pages 93-98
    17. Reading of Operating Values of End Effector During Goods Manipulation
      F. Stary, V. Dynybyl, J. Mrazek
      Pages 99-102
    18. Building Platform for Identification of Important Parameters for 3D Printing of Huge Parts
      M. Suransky, M. Zlebek
      Pages 103-110
    19. On Cardan Joint: Some Special Applications
      J. Zicha, K. Macuchova
      Pages 111-114

  3. Tribology

    1. Front Matter
      Pages 115-115
      PDF
    2. Experimental Analysis of Tribological Properties of Heat Treated Graphitic Cast Irons
      J. Broncek, P. Fabian, M. Dzimko, N. Radek
      Pages 117-125
    3. The Experimental Determination of the Grease Amount to Effective Wear Reduction in the Wheel-Rail Contact
      J. Fryza, M. Omasta
      Pages 127-132
    4. The Effect of Friction Modifier on the Wheel-Rail Contact
      R. Galas, M. Omasta
      Pages 133-138
    5. Measurement Methodology of Low-Shear Viscosity of Reference Liquid Under High-Pressure
      S. Hornak
      Pages 139-143
    6. Modification of Tooth Flank as the Possibility of Increasing Resistance of Gearing to Pitting
      B. Kopilakova, M. Bosansky, J. Zapotocny
      Pages 145-151
    7. Including the Method of Lubricant Film Thickness Measurement with the Use of the Monochromatic Interferometry to the Education of Tribology
      D. Kostal, I. Křupka, M. Hartl
      Pages 153-158
    8. Frictional Properties of PVA Hydrogel
      D. Nečas, M. Vrbka, S. Yarimitsu, K. Nakashima, Y. Sawae, P. Šperka et al.
      Pages 159-164
    9. Effect of Sanding on Adhesion Under Oil and Water Condition Between Wheel and Rail
      D. Smejkal
      Pages 165-170

  4. Hydraulics – Fluid Mechanisms

    1. Front Matter
      Pages 171-171
      PDF
    2. Experimental Research and Optimization of Characteristic Parameters of the Valve Plate of the Axial Piston Pump/Motor
      R. Petrovic, M. Andjelkovic, M. Radosavljevic, N. Todic
      Pages 173-183
    3. The Effects of the Temperatures on the Performance of the Gas Turbine
      A. Wahab, T. Ibrahim
      Pages 185-193

  5. Engineering Analyses

    1. Front Matter
      Pages 195-195
      PDF
    2. Innovation of Methodological Support of Risk Analyses of Technical Products in Their Life Cycle During Their Designing
      J. Dvorak, M. Sasiadek, S. Hosnedl
      Pages 197-202
    3. The Mathematical Description of Sunflower Seed’s Hulling Process Using Impact Huller
      J. Hoidekr, J. Andrus, V. Dynybyl
      Pages 203-206
    4. Roller Bearing Fatigue Life Calculation with Inclusion of the Fits Parameters
      S. Hrcek, R. Kohar
      Pages 207-213
    5. Application of Statistical Methods to Analysis of Parallel Structure of Gearbox Test Rig
      J. Chmelar, K. Petr, V. Dynybyl
      Pages 215-220
    6. Driving Shaft Fracture Analysis
      K. Kaláb
      Pages 221-226
    7. Force Conditions at an Antibacklash Designed Gear Mechanism
      V. Kloucek
      Pages 227-233
    8. The Effect of Fits Stiffness on Distribution of Internal Loading in Rolling Bearings
      R. Kohar, S. Hrcek
      Pages 235-241
    9. Design Calculation of Spur Gear Module
      E. Kronerova
      Pages 243-248
    10. Application of the Bond Graphs to the Description of Technical Systems
      Z. Matuszak
      Pages 249-254
    11. Assessment of the Validity of Technical Elements of the Complex Structure Using Flow Streams of Energy Factors
      Z. Matuszak
      Pages 255-262
    12. Influence of Short-Circuit Valve on Hydraulic Recovery of Vehicle Kinetic Energy
      Z. Nemec, J. Nevrly
      Pages 263-268
    13. FEM Simulations on Gears with Different Carbonized Depth
      K. Petr, V. Dynybyl, J. Krepela
      Pages 269-275
    14. Numerical Simulation of Ductile Fracture
      M. Spaniel
      Pages 277-282
    15. Dynamic of Propulsion, New Challenges for Analysis
      V. Zoul
      Pages 283-288

  6. Modern Material and Technology

    1. Front Matter
      Pages 289-289
      PDF
    2. Corrosion in Some Iron Alloys
      M. Khidhair, M. Hasan
      Pages 291-297
    3. Overview on the Clinched Joint Method
      P. Maly, V. Dynybyl, J. Sojka, F. Lopot
      Pages 299-303

About these proceedings

Introduction

This book is based on the 55th International Conference of Machine Design Departments 2014 (ICMD 2014) which was hosted by the Czech Technical University in September 2014. It features scientific articles which solve progressive themes from the field of machine design. The book addresses a broad range of themes including tribology, hydraulics, materials science, product innovation and experimental methods. It presents the latest interdisciplinary high-tech work. People with an interest in the latest research results in the field of machine design and manufacturing engineering will value this book with contributions of leading academic scientists and experts from all around the world.

Keywords

Designing Machine Element Experimental Analysis FEM Calculation Measurement Mechanical Engineering

Editors and affiliations

  • Vojtěch Dynybyl
    • 1
  • Ondrej Berka
    • 2
  • Karel Petr
    • 3
  • František Lopot
    • 4
  • Martin Dub
    • 5
  1. 1.Faculty of Mechanical EngineeringCzech Technical University of PraguePragueCzech Republic
  2. 2.Faculty of Mechanical EngineeringCzech Technical University of PraguePragueCzech Republic
  3. 3.Faculty of Mechanical EngineeringCzech Technical University of PraguePragueCzech Republic
  4. 4.Faculty of Mechanical EngineeringCzech Technical University of PraguePragueCzech Republic
  5. 5.Faculty of Mechanical EngineeringCzech Technical University of PraguePragueCzech Republic

Bibliographic information

  • DOI https://doi.org/10.1007/978-3-319-22762-7
  • Copyright Information Springer International Publishing Switzerland 2016
  • Publisher Name Springer, Cham
  • eBook Packages Engineering
  • Print ISBN 978-3-319-22761-0
  • Online ISBN 978-3-319-22762-7
  • Buy this book on publisher's site