Technological Aspects of Manufacturing and Numerical Modelling of Clinch-Adhesive Joints

  • Tomasz Sadowski
  • Tadeusz Balawender
  • Przemysław Golewski

Part of the SpringerBriefs in Applied Sciences and Technology book series (BRIEFSAPPLSCIENCES)

Also part of the SpringerBriefs in Computational Mechanics book sub series (BRIEFSCOMPUTAT)

Table of contents

  1. Front Matter
    Pages i-vii
  2. Tomasz Sadowski, Tadeusz Balawender, Przemysław Golewski
    Pages 1-59

About this book

Introduction

This short book describes the basic technological aspects involved in the creation of purely clinch and clinch-adhesive joints made of different types of adherent materials and employing different joining technologies. Basic parameters that need to be taken into account in the design process are also presented, while a comparison of experimental testing of the hybrid joint with simple clinching for a combination of different joining materials underlines the advantages of opting for hybrid joints. The book’s conclusions will facilitate the practical application of this new fastening technology.

Keywords

Clinch-adhesive Joints Clinching Technology Experimental Verifications FEA Model Joint Failure Joint Manufacture Joint Strength

Authors and affiliations

  • Tomasz Sadowski
    • 1
  • Tadeusz Balawender
    • 2
  • Przemysław Golewski
    • 3
  1. 1.Department of Civil EngineeringUniversity of TechnologyLublinPoland
  2. 2.Faculty of Mechanical Engineering and Aeronautics, Department of Materials Forming and ProcessingRzeszów University of TechnologyRzeszowPoland
  3. 3.Faculty of Civil and Architecture, Department of Solid MechanicsLublin University of TechnologyLublinPoland

Bibliographic information

  • DOI https://doi.org/10.1007/978-3-319-14902-8
  • Copyright Information The Author(s) 2015
  • Publisher Name Springer, Cham
  • eBook Packages Engineering
  • Print ISBN 978-3-319-14901-1
  • Online ISBN 978-3-319-14902-8
  • Series Print ISSN 2191-530X
  • Series Online ISSN 2191-5318
  • About this book