© 2021

Advances in Design, Simulation and Manufacturing IV

Proceedings of the 4th International Conference on Design, Simulation, Manufacturing: The Innovation Exchange, DSMIE-2021, June 8–11, 2021, Lviv, Ukraine – Volume 2: Mechanical and Chemical Engineering

  • Vitalii Ivanov
  • Ivan Pavlenko
  • Oleksandr Liaposhchenko
  • José Machado
  • Milan Edl


  • Reports on the application of computational methods in mechanical and chemical engineering

  • Describes advanced findings relating to the mechanics of solids and structures

  • Discusses energy-efficient technologies and their industrial applications

Conference proceedings DSMIE 2021

Part of the Lecture Notes in Mechanical Engineering book series (LNME)

Table of contents

  1. Front Matter
    Pages i-xix
  2. Mechanics of Solids and Structures

    1. Front Matter
      Pages 1-1
    2. Aleksandr Dykha, Serhii Matiukh, Oleg Makovkin
      Pages 3-11
    3. Ihor Hurey, Tetyana Hurey, Olena Lanets, Petro Dmyterko
      Pages 23-32
    4. Anton Karvatskii, Taras Lazarev, Ihor Mikulionok, Victor Vytvytskyi, Vladyslav Solovei
      Pages 33-42
    5. Oleksii Lanets, Oleksandr Kachur, Vitaliy Korendiy, Vasyl Lozynskyy
      Pages 43-52
    6. Ihor Shepelenko, Yuri Tsekhanov, Yakiv Nemyrovskyi, Vasiliy Gutsul, Sergii Mahopets
      Pages 53-62
    7. Vitalii Simonovskiy, Ivan Pavlenko, Jan Pitel, Denys Stremoukhov, Vitalii Ivanov
      Pages 63-74
    8. Kostiantyn Svirzhevskyi, Oleg Zabolotnyi, Anatolii Tkachuk, José Machado, Andriy Kononenko
      Pages 84-94
  3. Numerical Simulation of Coupled Systems

    1. Front Matter
      Pages 95-95
    2. Pavel Andrenko, Andrii Rogovyi, Iryna Hrechka, Serhii Khovanskyi, Maksim Svynarenko
      Pages 97-106
    3. Svetlana Bershak, Victor Kurgan, Ihor Sydorenko, Oleksii Lopakov, Volodymir Kosmachevskiy
      Pages 107-115
    4. Ilona Drach, Andrii Goroshko
      Pages 116-125
    5. Oleksandr Gusak, Mikhail Cherkashenko, Oleg Potetenko, Alexander Hasiuk, Kseniya Rezvaya
      Pages 126-136
    6. Andrii Marchenko, Andrey Grabovskiy, Mykola Tkachuk, Oleksandr Shut, Mykola Tkachuk
      Pages 137-145
    7. Anatolii Panchenko, Angela Voloshina, Igor Panchenko, Viktor Pashchenko, Andrii Zasiadko
      Pages 146-155
    8. Serhii Pylypaka, Tatiana Volina, Andrii Nesvidomin, Irina Zakharova, Alla Rebrii
      Pages 156-165
    9. Dmytro Sidorov, Aleksandr Kolosov, Elena Kolosova, Julia Nosachova, Mykola Glushchenko
      Pages 166-175

About these proceedings


This book reports on topics at the interface between mechanical and chemical engineering, emphasizing design, simulation, and manufacturing. Specifically, it covers recent developments in the mechanics of solids and structures, numerical simulation of coupled problems, including fatigue, fluid behavior, particle movement, pressure distribution. Further, it reports on developments in chemical process technology, heat and mass transfer, energy-efficient technologies, and industrial ecology. Based on the 4th International Conference on Design, Simulation, Manufacturing: The Innovation Exchange (DSMIE-2021), held on June 8-11, 2021, in Lviv, Ukraine, this second volume of a 2-volume set provides academics and professionals with extensive information on trends, technologies, challenges and practice-oriented experience in the above-mentioned areas.


Mechanical Control Systems Hydraulic motors Hydraulic Mechatronic Systems Models of Hydraulic Drives Hydrodynamic characteristics Granular Materials Separation Nonlinear Oscillations Hydrovolumetric transmission Active Hydrodynamic Regimes Nanocrystalline Hardened Layer Organo-mineral Fertilizer Rotor Systems Oilfield Wastewater Treatment Friction treatment Frictional Contact Swirling Flow Vibratory Equipment Slider-crank mechanisms DSMIE 2021

Editors and affiliations

  • Vitalii Ivanov
    • 1
  • Ivan Pavlenko
    • 2
  • Oleksandr Liaposhchenko
    • 3
  • José Machado
    • 4
  • Milan Edl
    • 5
  1. 1.Sumy State UniversitySumyUkraine
  2. 2.Sumy State UniversitySumyUkraine
  3. 3.Sumy State universitySumyUkraine
  4. 4.University of MinhoGuimaräesPortugal
  5. 5.University of West BohemiaPilsenCzech Republic

Bibliographic information

  • Book Title Advances in Design, Simulation and Manufacturing IV
  • Book Subtitle Proceedings of the 4th International Conference on Design, Simulation, Manufacturing: The Innovation Exchange, DSMIE-2021, June 8–11, 2021, Lviv, Ukraine – Volume 2: Mechanical and Chemical Engineering
  • Editors Vitalii Ivanov
    Ivan Pavlenko
    Oleksandr Liaposhchenko
    José Machado
    Milan Edl
  • Series Title Lecture Notes in Mechanical Engineering
  • Series Abbreviated Title Lect.Notes Mechanical Engineering
  • DOI
  • Copyright Information The Editor(s) (if applicable) and The Author(s), under exclusive license to Springer Nature Switzerland AG 2021
  • Publisher Name Springer, Cham
  • eBook Packages Engineering Engineering (R0)
  • Softcover ISBN 978-3-030-77822-4
  • eBook ISBN 978-3-030-77823-1
  • Series ISSN 2195-4356
  • Series E-ISSN 2195-4364
  • Edition Number 1
  • Number of Pages XIX, 413
  • Number of Illustrations 71 b/w illustrations, 123 illustrations in colour
  • Topics Solid Mechanics
    Industrial Chemistry/Chemical Engineering
    Materials Engineering
    Engineering Thermodynamics, Heat and Mass Transfer
  • Buy this book on publisher's site