Advertisement

Engineering Design Applications III

Structures, Materials and Processes

  • Andreas Öchsner
  • Holm Altenbach
Book
  • 1.7k Downloads

Part of the Advanced Structured Materials book series (STRUCTMAT, volume 124)

Table of contents

  1. Front Matter
    Pages i-x
  2. Daniel Villaseñor-Chávez, Luis Héctor Hernández-Gómez, Juan Alfonso Beltrán-Fernández, Juan Carlos Hermida-Ochoa, Juan Luis Cuevas-Andrade
    Pages 1-11
  3. Itzia Calalpa-Torres, Christopher René Torres-SanMiguel, Guillermo Urriolagoitia-Sosa, Alejandro Cuautle-Estrada, Beatriz Romero-Angeles, Guillermo Manuel Urriolagoitia-Calderón
    Pages 13-21
  4. Alejandro Cuautle-Estrada, Christopher René Torres-SanMiguel, Guillermo Urriolagoitia-Sosa, Luis Martínez-Sáez, Beatriz Romero-Ángeles, Guillermo Manuel Urriolagoitia-Manuel
    Pages 23-29
  5. Mateus Coutinho de Moraes, Miguel Ângelo Menezes
    Pages 45-60
  6. Siegfried Ladurner, Markus Wenin, Daniel Reiterer, Maria Letizia Bertotti, Giovanni Modanese
    Pages 61-69
  7. Laura Guadalupe Carbajal-Figueroa, Salatiel Pérez-Montejo, Alejandra Armenta-Molina, Gilberto Soto-Mendoza, Luis Héctor Hernández-Gómez, Juan Alfonso Beltrán-Fernández et al.
    Pages 71-80
  8. Alejandra Armenta-Molina, Abraham Villanueva-García, Gilberto Soto-Mendoza, Salatiel Pérez-Montejo, Pablo Ruiz-López, Juan Alfonso Beltrán-Fernández et al.
    Pages 81-90
  9. Edgar Hernández-Palafox, Juan Cruz-Castro, Yunuén López-Grijalba, Luis Héctor Hernández-Gómez, Guillermo Manuel Urriolagoitia-Calderón, Laura Guadalupe Carbajal-Figueroa
    Pages 91-102
  10. Israel Abraham Alarcón-Sánchez, Roberto Linares-y-Miranda, Luis Hector Hernández-Gómez, Yunuén López-Grijalba, Alejandra Armenta-Molina, Laura Guadalupe Carbajal-Figueroa et al.
    Pages 103-113
  11. Meziane Chalah, Farid Chalah, Salah Eddine Djellab, Djillali Benouar
    Pages 115-126
  12. Lila Chalah-Rezgui, Farid Chalah, Salah Eddine Djellab, Ammar Nechnech, Abderrahim Bali
    Pages 127-132
  13. Farid Chalah, Lila Chalah-Rezgui, Salah Eddine Djellab, Abderrahim Bali
    Pages 133-151
  14. Lila Chalah-Rezgui, Farid Chalah, Salah Eddine Djellab, Ammar Nechnech, Abderrahim Bali
    Pages 153-160
  15. Farid Chalah, Lila Chalah-Rezgui, Salah Eddine Djellab, Abderrahim Bali
    Pages 161-169
  16. Farid Chalah, Lila Chalah-Rezgui, Salah Eddine Djellab, Abderrahim Bali
    Pages 171-181
  17. Mohamed M. Bahgat, Ahmed Y. Shash, Mahmoud Abd-Rabou, Iman S. El-Mahallawi
    Pages 215-233
  18. González Uribe Iván, Urriolagoitia Sosa Guillermo, Romero Ángeles Beatriz, Torres San Miguel Christopher René, Gutiérrez Lonche Liliana, Hernández Ramírez Aldo et al.
    Pages 277-284
  19. Ivan Kopal, Juliána Vršková, Marta Harničárová, Ján Valíček, Darina Ondrušová, Ján Krmela et al.
    Pages 295-307
  20. Vladimíra Krmelová, Ivan Kopal, Mária Gavendová, Ivan Labaj, Jan Krmela, Marta Harničárová et al.
    Pages 321-336

About this book

Introduction

This book provides an update on recent advances in various areas of modern engineering design, such as mechanical, materials, computer, and process engineering, which provide the foundation for the development of improved structures, materials, and processes. The modern design cycle is characterized by the interaction of different disciplines and a strong shift toward computer-based approaches involving only a small number of experiments for verification purposes. A major driver for this development is the increased demand for cost reduction, which is also connected to environmental demands. In the transportation industry (e.g. automotive or aerospace), where there is a demand for greater fuel efficiency, one solution is lighter structures and/or improved processes for energy conversion. Another emerging area is the interaction of classical engineering with the health and medical sector.

Keywords

process development materials design computer-based approaches environmental demands transportation industry energy conversion process improvement

Editors and affiliations

  • Andreas Öchsner
    • 1
  • Holm Altenbach
    • 2
  1. 1.Faculty of Mechanical EngineeringEsslingen University of Applied SciencesEsslingenGermany
  2. 2.Chair of Engineering Mechanics, Faculty of Mechanical EngineeringInstitute of Mechanics, Otto von Guericke University MagdeburgMagdeburgGermany

Bibliographic information

  • DOI https://doi.org/10.1007/978-3-030-39062-4
  • Copyright Information Springer Nature Switzerland AG 2020
  • Publisher Name Springer, Cham
  • eBook Packages Engineering
  • Print ISBN 978-3-030-39061-7
  • Online ISBN 978-3-030-39062-4
  • Series Print ISSN 1869-8433
  • Series Online ISSN 1869-8441
  • Buy this book on publisher's site