Advertisement

Design Tools and Methods in Industrial Engineering

Proceedings of the International Conference on Design Tools and Methods in Industrial Engineering, ADM 2019, September 9–10, 2019, Modena, Italy

  • Caterina  Rizzi
  • Angelo Oreste Andrisano
  • Francesco Leali
  • Francesco Gherardini
  • Fabio Pini
  • Alberto Vergnano
Conference proceedings ADM 2019

Part of the Lecture Notes in Mechanical Engineering book series (LNME)

Table of contents

  1. Front Matter
    Pages i-xxiii
  2. Geometric Modelling and Analysis

    1. Front Matter
      Pages 1-1
    2. Francesco Bianconi, Mario Luca Fravolini, Isabella Palumbo, Barbara Palumbo
      Pages 3-14
    3. Giulia Pascoletti, Michele Calì, Cristina Bignardi, Paolo Conti, Elisabetta M. Zanetti
      Pages 15-23
    4. Michele Calì, Domenico Speranza, Ubaldo Cella, Marco Evangelos Biancolini
      Pages 24-36
    5. Antonio Boccaccio, Michele Fiorentino, Vito Modesto Manghisi, Giuseppe Monno, Antonio E. Uva
      Pages 37-44
  3. Industrial Design and Ergonomics

    1. Front Matter
      Pages 45-45
    2. Dolores Parras-Burgos, Francisco J. F. Cañavate, Francisco Cavas-Martínez, Daniel G. Fernández-Pacheco
      Pages 47-58
    3. Nicola Cappetti, Alessandro Naddeo, Vittorio Maria Soldovieri, Ivan Vitillo, Iolanda Fiorillo
      Pages 59-70
    4. Enrico Avagnale, Rosaria Califano, Iolanda Fiorillo
      Pages 71-81
  4. Virtual Reality and Interactive Design

    1. Front Matter
      Pages 83-83
    2. Alma Leopardi, Silvia Ceccacci, Maura Mengoni
      Pages 85-94
    3. Marco Gribaudo, Sandro Moos, Pietro Piazzolla, Francesco Porpiglia, Enrico Vezzetti, Maria Grazia Violante
      Pages 95-105
    4. Michele Gattullo, Giulia Wally Scurati, Alessandro Evangelista, Francesco Ferrise, Michele Fiorentino, Antonio Emmanuele Uva
      Pages 106-117
    5. Emanuele Bonera, Marco Gadola, Daniel Chindamo, Stefano Morbioli, Paolo Magri
      Pages 118-128
    6. Fabio Bruno, Loris Barbieri, Emanuele Marino, Maurizio Muzzupappa, Biagio Colacino
      Pages 129-139
  5. Reverse Engineering, Digital Acquisition and Inspection

    1. Front Matter
      Pages 153-153
    2. Sandro Barone, Paolo Neri, Alessandro Paoli, Armando V. Razionale, Leonardo Bertini, Ciro Santus
      Pages 155-164
    3. Francesco Buonamici, Monica Carfagni, Rocco Furferi, Lapo Governi, Yary Volpe
      Pages 165-176
    4. Andrea Vitali, Daniele Regazzoni, Caterina Rizzi, Guido Molinero
      Pages 177-188
    5. Luca Puggelli, Rocco Furferi, Lapo Governi
      Pages 189-200
    6. Luca Di Angelo, Paolo Di Stefano, Anna Eva Morabito
      Pages 201-212
  6. Geometrical Product Specification and Tolerancing

    1. Front Matter
      Pages 227-227
    2. Rocco Mozzillo, Ferdinando Vitolo, Paola Iaccarino, Pasquale Franciosa
      Pages 229-240
    3. Alberto Vergnano, Francesco Gherardini, Andrea Petruccioli, Enrico Bonazzi, Francesco Leali
      Pages 241-254
  7. Design for Manufacturing and Assembly

    1. Front Matter
      Pages 255-255
    2. Marco Zago, Mats Larsson, Ilaria Cristofolini
      Pages 257-267
    3. Claudio Favi, Giovanni Formentini, Francois Bouissiere, Claude Cuiller, Pierre-Eric Dereux, Corentin Malchair
      Pages 268-278
    4. Marco Mandolini, Claudio Favi, Federico Campi, Roberto Raffaeli
      Pages 279-290
    5. Sebastian Hähnel, Tim Grunwald, Thomas Bergs, Fabio Pini, Francesco Leali
      Pages 291-303
    6. Daniela Francia, Davide Seminerio, Gianni Caligiana, Leonardo Frizziero, Alfredo Liverani, Giampiero Donnici
      Pages 304-314
  8. Integrated Product and Process Design

    1. Front Matter
      Pages 315-315
    2. Marco Marconi, Alessandra Papetti, Marta Rossi, Giulia Di Domizio
      Pages 317-328
    3. Luca Grigolato, Stefano Filippi, Daniela Barattin, Daniele Cantarella, Won Moon, Roberto Meneghello et al.
      Pages 329-341
    4. Sergio Rizzuti, Luigi De Napoli
      Pages 342-351
    5. Marta De Giorgi, Nunzia Gallo, Marta Madaghiele, Anna Eva Morabito
      Pages 361-372
    6. Cristina Renzi, Luca Di Angelo, Francesco Leali
      Pages 373-384
  9. Integrated Methods for System Design, Simulation, Analysis and Optimization

    1. Front Matter
      Pages 385-385
    2. Stefano Uberti, Alessandro Copeta
      Pages 387-399
    3. Filippo Cucinotta, Marcello Raffaele, Fabio Salmeri
      Pages 400-409
    4. Fabio Bruno, Loris Barbieri, Antonio Lagudi, Marino Mangeruga, Francesco Pupo, Alessandro Casavola
      Pages 410-421
    5. Loris Barbieri, Filippo Cucinotta, Alessandro Gallo, Fabio Bruno, Maurizio Muzzupappa, Nadia Penna et al.
      Pages 422-431
    6. Stanislao Grazioso, Giuseppe Di Gironimo, Antonio Lanzotti
      Pages 444-457
    7. Michele Calì, Salvatore Massimo Oliveri, Sebastiano Zuccarello
      Pages 458-469
    8. Michele Calabretta, Alessandro Sitta, Salvatore Massimo Oliveri, Gaetano Sequenzia
      Pages 470-480
    9. Michele Calabretta, Alessandro Sitta, Salvatore Massimo Oliveri, Gaetano Sequenzia
      Pages 481-491

About these proceedings

Introduction

This book reports on cutting-edge design methods and tools in industrial engineering, advanced findings in mechanics and material science, and relevant technological applications. Topics span from geometric modelling tools to applications of virtual/augmented reality, from interactive design to ergonomics, human factors research and reverse engineering. Further topics include integrated design and optimization methods, as well as experimental validation techniques for product, processes and systems development, such as additive manufacturing technologies. This book is based on the International Conference on Design Tools and Methods in Industrial Engineering, ADM 2019, held on September 9–10, 2019, in Modena, Italy, and organized by the Italian Association of Design Methods and Tools for Industrial Engineering, and the Department of Engineering “Enzo Ferrari” of the University of Modena and Reggio Emilia, Italy. It provides academics and professionals with a timely overview and extensive information on trends and technologies in industrial design and manufacturing.

Keywords

Geometric Characterization of Products Geometrical Product Tolerancing Interactive Design Applications of Virtual and Augmented Reality in design User-centred Product Design CAD-based Method 3D Reconstruction Design for Manufacturing and Assembly Virtual Prototyping Human-related Applications Analysis and Optimization of Product and Process Simulation- Based Design Integrated Design Industrial Design Ergonomics Knowledge and Product Data Management Reverse Engineering and Inspection

Editors and affiliations

  • Caterina  Rizzi
    • 1
  • Angelo Oreste Andrisano
    • 2
  • Francesco Leali
    • 3
  • Francesco Gherardini
    • 4
  • Fabio Pini
    • 5
  • Alberto Vergnano
    • 6
  1. 1.Dipartimento di Ingegneria Gestionale, dell‘Informazione e della ProduzioneUniversità di BergamoDalmineItaly
  2. 2.Dipartimento Di Ingegneria “Enzo Ferrari”Università Di Modena E Reggio EmiliaModenaItaly
  3. 3.Dipartimento Di Ingegneria “Enzo Ferrari”Università Di Modena E Reggio EmiliaModenaItaly
  4. 4.Dipartimento Di Ingegneria “Enzo Ferrari”Università Di Modena E Reggio EmiliaModenaItaly
  5. 5.Dipartimento Di Ingegneria “Enzo Ferrari”Università Di Modena E Reggio EmiliaModenaItaly
  6. 6.Dipartimento Di Ingegneria “Enzo Ferrari”Università Di Modena E Reggio EmiliaModenaItaly

Bibliographic information

  • DOI https://doi.org/10.1007/978-3-030-31154-4
  • Copyright Information Springer Nature Switzerland AG 2020
  • Publisher Name Springer, Cham
  • eBook Packages Engineering
  • Print ISBN 978-3-030-31153-7
  • Online ISBN 978-3-030-31154-4
  • Series Print ISSN 2195-4356
  • Series Online ISSN 2195-4364
  • Buy this book on publisher's site