Advertisement

An Intelligent Inspection Planning System for Prismatic Parts on CMMs

  • Slavenko M. Stojadinović
  • Vidosav D. Majstorović

Table of contents

  1. Front Matter
    Pages i-xv
  2. Slavenko M. Stojadinović, Vidosav D. Majstorović
    Pages 1-31
  3. Slavenko M. Stojadinović, Vidosav D. Majstorović
    Pages 33-54
  4. Slavenko M. Stojadinović, Vidosav D. Majstorović
    Pages 55-74
  5. Slavenko M. Stojadinović, Vidosav D. Majstorović
    Pages 75-93
  6. Slavenko M. Stojadinović, Vidosav D. Majstorović
    Pages 95-113
  7. Slavenko M. Stojadinović, Vidosav D. Majstorović
    Pages 115-139

About this book

Introduction

This book introduces a new generation of metrological systems and their application in a digital quality concept. It discusses the development of an optimal collision-free measuring path based on CAD geometry and tolerances defined in knowledge base and AI techniques such as engineering ontology, ACO and GA. This new approach, combining both geometric and metrological features, allows the following benefits: reduction of a preparation time based on the automatic generation of a measuring protocol; developed mathematical model for the distribution of measuring points and collision avoidance; the optimization of a measuring probe path; the analysis of a part placement based on the accessibility analysis and automatic configuration of measuring probes. The application of this new system is particularly useful in the inspection of complex prismatic parts with a large number of tolerances, in all of type production. The implementation is demonstrated using several case studies relating to high-tech industries and advanced, non-conventional processes.

Keywords

Coordinate Measuring Machine Dimensional Metrology Coordinate Metrology Engineering Ontology Ant Colony Optimization Prismatic Measurement Parts Genetic Algorithm Feature-based Inspection System

Authors and affiliations

  • Slavenko M. Stojadinović
    • 1
  • Vidosav D. Majstorović
    • 2
  1. 1.Department of Production Engineering, Faculty of Mechanical EngineeringUniversity of BelgradeBelgradeSerbia
  2. 2.Department of Production Engineering, Faculty of Mechanical EngineeringUniversity of BelgradeBelgradeSerbia

Bibliographic information

  • DOI https://doi.org/10.1007/978-3-030-12807-4
  • Copyright Information Springer Nature Switzerland AG 2019
  • Publisher Name Springer, Cham
  • eBook Packages Engineering
  • Print ISBN 978-3-030-12806-7
  • Online ISBN 978-3-030-12807-4
  • Buy this book on publisher's site