Dynamic-Mismatch Mapping for Digitally-Assisted DACs

  • Yongjian Tang
  • Hans Hegt
  • Arthur van Roermund

Part of the Analog Circuits and Signal Processing book series (ACSP, volume 92)

Table of contents

  1. Front Matter
    Pages i-x
  2. Yongjian Tang, Hans Hegt, Arthur van Roermund
    Pages 1-3
  3. Yongjian Tang, Hans Hegt, Arthur van Roermund
    Pages 5-21
  4. Yongjian Tang, Hans Hegt, Arthur van Roermund
    Pages 23-68
  5. Yongjian Tang, Hans Hegt, Arthur van Roermund
    Pages 69-89
  6. Yongjian Tang, Hans Hegt, Arthur van Roermund
    Pages 91-117
  7. Yongjian Tang, Hans Hegt, Arthur van Roermund
    Pages 119-135
  8. Yongjian Tang, Hans Hegt, Arthur van Roermund
    Pages 137-155
  9. Yongjian Tang, Hans Hegt, Arthur van Roermund
    Pages 157-158
  10. Back Matter
    Pages 159-164

About this book

Introduction

This book describes a novel digital calibration technique called dynamic-mismatch mapping (DMM) to improve the performance of digital to analog converters (DACs).  Compared to other techniques, the DMM technique has the advantage of calibrating all mismatch errors without any noise penalty, which is particularly useful in order to meet the demand for high performance DACs in rapidly developing applications, such as multimedia and communication systems.

 

·         Discusses fundamental performance limitations of digital to analog converters and summarizes existing design/calibration techniques;

·         Introduces a novel digital calibration technique, called dynamic-mismatch mapping (DMM) to improve both static and dynamic performance of DACs;

·         Includes two state-of-the-art DAC design examples with in-depth discussion.

Keywords

Analog Circuits and Signal Processing DAC Data Converters Digital Signal Processing Digital to Analog Converters Digital to Analog Interface Circuits Dynamic Mismatch Mapping Sigma-Delta Data Converters Signal Conditioning VLSI Analog-Digital Converters

Authors and affiliations

  • Yongjian Tang
    • 1
  • Hans Hegt
    • 2
  • Arthur van Roermund
    • 3
  1. 1.MaxLinear Inc.CarlsbadUSA
  2. 2.Department of Electrical EngineeringEindhoven University of TechnologyEindhovenNetherlands
  3. 3., Department of Electrical EngineeringEindhoven University of TechnologyEindhovenNetherlands

Bibliographic information

  • DOI https://doi.org/10.1007/978-1-4614-1250-2
  • Copyright Information Springer Science+Business Media New York 2013
  • Publisher Name Springer, New York, NY
  • eBook Packages Engineering
  • Print ISBN 978-1-4614-1249-6
  • Online ISBN 978-1-4614-1250-2
  • About this book