Advertisement

Fusion Bonding of Polymer Composites

  • C. Ageorges
  • L. Ye
Book

Part of the Engineering Materials and Processes book series (EMP)

Table of contents

  1. Front Matter
    Pages i-xviii
  2. C. Ageorges, L. Ye
    Pages 1-5
  3. C. Ageorges, L. Ye
    Pages 65-103
  4. C. Ageorges, L. Ye
    Pages 105-133
  5. C. Ageorges, L. Ye
    Pages 135-160
  6. C. Ageorges, L. Ye
    Pages 161-195
  7. C. Ageorges, L. Ye
    Pages 197-211
  8. C. Ageorges, L. Ye
    Pages 213-228
  9. C. Ageorges, L. Ye
    Pages 229-252
  10. Back Matter
    Pages 253-273

About this book

Introduction

Fusion bonding is one of the three methods available for joining composite and dissimilar materials. While the other two, mechanical fastening and adhesion bonding, have been the subject of wide coverage both in textbooks and monographs, fusion bonding is covered here substantially for the first time. Fusion bonding offers a number of advantages over traditional joining techniques and it is anticipated that its use will increase dramatically in the future because of the rise in the use of thermoplastic matrix composites and the growing necessity for recyclability of engineering assemblies. Fusion Bonding of Polymer Composites provides an in-depth understanding of the physical mechanisms involved in the fusion bonding process, covering such topics as:
- heat transfer in fusion bonding;
- modelling thermal degradation;
- consolidation mechanisms;
- crystallisation kinetics;
- processing-microstructure-property relationship;
- full-scale fusion bonding;
- fusion bonding of thermosetting composite/thermoplastic composite and metal/thermoplastic joints.
The book focuses on one practical case study using the resistance welding process. This example exposes the reader to the development of processing windows for a novel manufacturing process including the use of experimental test programmes and modelling strategies.

Keywords

PEEK PEI Polycarbonat SMC Thermoplast polymer thermoset

Authors and affiliations

  • C. Ageorges
    • 1
  • L. Ye
    • 2
  1. 1.DaimlerChrysler AGResearch and Technology/Manufacturing TechnologyUlmGermany
  2. 2.Centre for Advanced Materials Technology, School of Aerospace, Mechanical and Mechatronic EngineeringThe University of SydneyAustralia

Bibliographic information

  • DOI https://doi.org/10.1007/978-1-4471-0171-0
  • Copyright Information Springer-Verlag London Limited 2002
  • Publisher Name Springer, London
  • eBook Packages Springer Book Archive
  • Print ISBN 978-1-4471-1087-3
  • Online ISBN 978-1-4471-0171-0
  • Series Print ISSN 1619-0181
  • Buy this book on publisher's site