Abstract
Being an important element of the urban space, a workplace for many people and a landmark for even more, any industrial building should be mindfully designed with regard to its importance for the local society. Nowadays, a raising significance of the creative sector of economy requires particular attention of architects and urbanists to summarize the methods supporting the successful design of creative industry buildings. Among plenty of different design approaches, at first glance personal to every architect, we can nonetheless identify a set of general rules and universal design tools which are shared in common.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Bonenberg W., “Przemysł w Mieście. Ekologiczna metoda modernizacji zakładów przemysłowych zlokalizowanych na obszarach intensywnie zurbanizowanych”, Zeszyty Naukowe Politechniki Śląskiej, Gliwice 1985.
Cherbo J., Wyszomirski M. (eds), “The Public Life of the Arts in America”, Rutgers University Press, New Brunswick, NJ 2000.
Drury J., “Factories. Planning, Design and Modernisation”, The Architectural Press, London 1981.
Gehl J., “Life between buildings. Using Public Space”, trans. Koch J., Island Press, London 2011.
Lyndon D. and Moore Ch. W., “Chambers for A Memory Place”, with illustrations by the authors, The MIT Press, Cambridge MA, 1994.
Stiasny G., “Od Mordoru do start-upu. Nowe miejsca pracy”, [in:] Architektura Murator, 03/2016//258, Warszawa, p.28–38.
Smoleń M., “Przemysły kultury. Wpływ na rozwój miast”, Wydawnictwo Uniwersytetu Jagiellońskiego, Kraków, 2003.
Szparkowski Z., “Architektura współczesnej fabryki”, Oficyna Wydawnicza Politechniki Warszawskiej, Warszawa 1999.
Venturi R., Scott Brown D. and Izenour S., “Learning from Las Vegas: The forgotten symbolism of architectural form”, Revised edition, The MIT Press, Cambridge MA 1977.
Webber M.J., “Location of Manufacturing Activity in Cities”, [in:] Urban Geography, Volume 3, Issue 3, 198–2.
Acknowledgments
I would like to express my gratitude to my supervisor Prof. Wojciech Bonenberg who has developed the guidelines and the theoretical background of the subject I am currently working on with architecture students at Poznan University of Technology (PUT). I must also acknowledge the students whose projects supported this writing and whose drawings helped to illustrate it.
Author information
Authors and Affiliations
Additional information
© The Author(s) 2016. This article is published with open access by the GSTF.
Dr. Marta Pieczara Faculty of Architecture Institute of Architecture and Planning Poznan University of Technology Poznan, Poland
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made.
The images or other third party material in this article are included in the article’s Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder.
To view a copy of this licence, visit https://creativecommons.org/licenses/by/4.0/.
About this article
Cite this article
Pieczara, M. Design Methods for Creative Industry Buildings. GSTF J Eng Technol 4, 4 (2016). https://doi.org/10.7603/s40707-016-0004-7
Published:
DOI: https://doi.org/10.7603/s40707-016-0004-7