Abstract
An RFQCB is designed at Rare Isotope Science Project (RISP) project to efficiently accept high intensity continuous beams provided by ISOL-RISP facility and deliver to Electron Beam Ion Source (EBIS) charge breeder bunched beams with emittance around 3 π.mm.mrad, energy spread < 10 eV and short bunch width (~ 10 μs). A new design concept to be implemented in this RFQCB have been developed, including a novel optics system with improved differential pumping system. An electric system providing RF voltages of high amplitudes going up to 10 kV is being also developed. The mechanical design of the various elements forming the radiofrequency quadrupole (RFQ) charge breeder (CB) and their matter are also performed. An overview of the RISP RFQCB design concept as well as the development of its sub-systems will be reported.
Similar content being viewed by others
References
D-O. Jeon, Status of RAON accelerator systems, RISP workshop on accelerator systems (19 May 2013), http://indico.risp.re.kr/indico/conferenceOtherViews.py ?view=standard&confId=2.
S-K. Kim, Status of rare isotope science project, RISP workshop on accelerator systems (19 May 2013), http://indico.risp.re.kr/indico/conferenceOtherViews.py ?view=standard&confId=2.
S. Jeong, Progress of the RAON heavy ion accelerator project in Korea, 7th Int. Particle Accelerator Conf. (IPAC’16) (Busan, Korea, May 2016), paper MOAB01.
I-S. Hong et al., Nucl. Instrum. Meth. B 317, 248 (2013), http://dx.doi.org/10.1016/j.nimb.2013.08.047.
S. Kondrashev et al., Advance EBIS charge breeder for rare isotope science project, Proceeding of IPAC2016, ISBN 978-3-95450-147-24 (Busan, Korea, 2016).
R. Boussaid et al., Phys. Rev. ST. Accel. Beams 18, 072802 (2015), DOI: http://dx.doi.org/10.1103/PhysRevSTAB.18.072802.
R. Boussaid et al., Design of RISP RFQ Cooler Buncher, Proceeding of IBIC 2016 (Barcelona, Spain, 2016), https://oraweb.cern.ch/pls/ibic2016/toc.htm.
M. D. Lunney and R. B. Moore, Int. J. Mass Spectrom. 190/191, 153 (1999), http://dx.doi.org/10.1016/S1387-3806(99)00009-3.
Molflow+ website: https://testmolflow.web.cern.ch/.
D. A. Dah 2000 Simion 3D V8.0 User Manual, Idaho National Engineering Laboratory, Idaho Falls U. S. A., http://simion.com/.
Inventor Autodesk, http://www.autodesk.com/products/inventor/overview.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Boussaid, R., Park, YH. & Kondrashev, S. Technical design of RISP RFQ Cooler buncher. Journal of the Korean Physical Society 71, 848–854 (2017). https://doi.org/10.3938/jkps.71.848
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.3938/jkps.71.848