Abstract
The KOMAC (Korea Multi-purpose Accelerator Complex) has been developing a 300-kV ion source test stand for a 1-MV electrostatic accelerator for industrial purposes. A RF ion source was operated at 200 MHz with its matching circuit. The beam profile and emittance were measured behind an accelerating column to confirm the beam property from the RF ion source. The beam profile was measured at the end of the accelerating tube and at the beam dump by using a beam profile monitor (BPM) and wire scanner. An Allison-type emittance scanner was installed behind the beam profile monitor (BPM) to measure the beam density in phase space. The measurement results for the beam profile and emittance are presented in this paper.
This is a preview of subscription content, log in via an institution to check access.
Similar content being viewed by others
References
S.-H. Park and Y.-S. Kim, J. Korean Phys. Soc. 67, 1393 (2015).
J.-T. Kim, K.-M. Park, D.-H. Seo, H.-S. Kim, H.-J. Kwon and Y.-S. Cho, Transactions of the Korean Nuclear Society Autumn Meeting (Pyeongchang, Korea, October 30-31, 2014).
H.-J. Kwon, S.-H. Park, D.-I. Kim and Y.-S. Cho, Rev. Sci. Instrum. 87, 02C105 (2016).
http://www.pelletron.com/bpm.htm.
P. W. Allison, J. D. Sherman and D. B. Holtkamp, IEEE Trans. Nucl. Sci. NS 30, 2204 (1983).
H.-J. Kwon, H.-S. Kim, D.-I. Kim, J.-H. Jang and Y.-S. Cho, J. Korean Phys. Soc. 56, 1998 (2010).
M. P. Stockli, R. F. Welton and R. Keller, Rev. Sci. Instrum 75, 1646 (2004).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Park, SH., Kim, DI. & Kim, YS. Beam property measurement of a 300-kV ion source test stand for a 1-MV electrostatic accelerator. Journal of the Korean Physical Society 69, 971–975 (2016). https://doi.org/10.3938/jkps.69.971
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.3938/jkps.69.971