Abstract
The low-energy beam-transport (LEBT) line for the post accelerator is required to deliver effectively the beam produced by the electron-cyclotron resonance ion source (ECR-IS). This LEBT was designed and optimized to transmit a 58Ni8+ ion beam with an energy of 5 keV/u at the entrance of the LEBT. This line consisted of a 90-degree dipole, a pair of solenoids, electrostatic quadrupoles and a multi-harmonic buncher. The designed LEBT showed a root-mean-squared (RMS) envelope and total length of less than 14 mm and 7 meters, respectively. This paper presents the results for the optics design and the beam tracking that were obtained by using TraceWin and TRACK codes.
Similar content being viewed by others
References
D. Jeon, Proceedings of IPAC’13 (Shanghai, China, THPWO062, 2013).
D. Uriot and N. Pichoff, PAC2003 5, 3491 (2003).
S. Kondrashev et al., Proceedings of ECRIS08 (Chicago, USA, THCO-A01, 2008).
Y. Sato et al., RIKEN Accel. Prog. Rep. 43, 15 (2010).
E.-S. Kim et al., Proceeding of IPAC2013 (Shanghai, China, TUPWO037, 2013).
F. J. Lynch et al., Nuclear Instruments and Methods 159, 245 (1979).
Q. Zhao et al., Proceedings of LINAC08 (Victoria, BC, Canada, THP069, 2008).
Q. Zhao et al., Proceedings of LINAC 2006 (Knoxville, Tennessee USA, TUP046, 2006).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Lee, Y., Bahng, J. & Kim, ES. Design study of the LEBT for the post accelerator of the RAON. Journal of the Korean Physical Society 66, 353–357 (2015). https://doi.org/10.3938/jkps.66.353
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.3938/jkps.66.353