Abstract
The calculated beam profile was compared with that measured from the proton induced x-ray emission / proton induced gamma ray emission (PIXE/PIGE) experimental line at one of several cyclotron research centers (CRCs), which were installed for the purpose of medical research in regional areas throughout Korea. The CRC cyclotron mainly accelerates protons in order to produce PET (positron emission tomography) radioisotopes such as F-18 and C-11 nuclides. To further the utility of the CRC cyclotron, an external beam line was designed and constructed for PIXE/PIGE measurement. The beam line consisted of a bending magnet, a Q-pole triplet, a Q-pole doublet, and a steering magnet. We observed the beam profile in order to obtain the emittance and the beam size, which were then used to determine the magnet field gradient of the quadrupole magnet. In this research, the emittance and the beam size were obtained using analytical and experimental methods.
Similar content being viewed by others
References
Y.-S. Kim, J. Korean Phys. Soc. 59, 563 (2011).
J. F. Ziegler, M. D. Ziegler and J. P. Biersack, Nucl. Instrum, Methods Phys. Res., Sect. B 268, 1818 (2010).
V. Robert et al., in Proceeding of PAC (Chicago, Illinois, June 18–22, 2001), p. 1324.
H. Takeda and J. H. Billen, LA-UR-98-4478, 2005.
S. Y. Lee, Accelerator Physics, 2nd ed. (World-Scientific Pub. Co, NY, 2004).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Park, SH., Kim, YS. Characterization of the beam profile for the PIXE/PIGE beam line at the CRC proton cyclotron. Journal of the Korean Physical Society 63, 1291–1295 (2013). https://doi.org/10.3938/jkps.63.1291
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.3938/jkps.63.1291