Abstract
The paper investigates the swirling flow behind the GTE combustion chamber swirler with blades installed under different angles. The mixing ratio in the flow is experimentally analyzed and compared with the estimated values obtained by a numerical approach and using various models of turbulent viscosity.
Similar content being viewed by others
REFERENCES
Mingazov, B.G., Aleksandrov, Yu.B., Kosterin, A.V., and Tokmovtsev, Yu.V., Protsessy goreniya i avtomatizirovannoe proektirovanie kamer sgoraniya GTD i GTU (Combustion Processes and Automated Design of Combustion Chambers of GTE and GTU), Kazan: Izd. Kazan. Gos. Tekh. Univ., 2015.
Akhmedov, R.B., Balagula, T.B., Rashidov, F.K., and Sakaev, A.Yu., Aerodinamika zakruchennoy strui (Aerodynamics of the Swirling Jet), Akhmedov, R.B., Ed., Moscow: Energiya, 1977.
Kutateladze, S.S., Volchkov, E.P., and Terekhov, V.I., Aerodinamika i teplomassobmen v ogranichennykh vikhrevykh potokakh (Aerodynamics and Heat and Mass Transfer in Confined Vortex Flows), Novosibisk: ITF, 1987.
Gupta, A.K., Lilley, D.G., and Syred, N., Swirl Flows, Tunbridge Wells, Kent: Abacus Press, 1984.
Dekterev, A.A., Mathematical Modeling of Swirling Flows for Industrial Applications, Tezisy dokladov VI Vserossiyskoi konferentsii s mezhdunarodnym uchastiem “Teplomassoobmen i gidrodinamika v zakruchennykh potokakh” (Theses of Reports of the 6th Int. Conf. “Heat Transfer and Aerodynamics in Swirled Flows”), 21–23 Nov., 2017, Novosibirsk: ITF, 2017, p. 16.
Kornev, N., Samarbaksh, S., Dhone, M., Feder, D., and Abdel Maksud, M., Problems of Simulation of Strong Concentrated Vortex Structures Using Grid Free and Grid Based Techniques, Tezisy dokladov VI Vserossiyskoi konferentsii s mezhdunarodnym uchastiem “Teplomassoobmen i gidrodinamika v zakruchennykh potokakh” (Theses of Reports of the 6th Int. Conf. “Heat Transfer and Aerodynamics in Swirled Flows”), 21–23 Nov., 2017, Novosibirsk: ITF, 2017, p. 19.
Dekterev, D.A., Platonov, D.V., and Minakov, A.V., An Experimental and Numerical Study of the Flow in the Model of HPP Hydro Turbine, Tezisy dokladov V Vserossiyskoi konferentsii s mezhdunarodnym uchastiem “Teplomassoobmen i gidrodinamika v zakruchennykh potokakh” (Theses of Reports of the 5th Int. Conf. “Heat and Mass Transfer and Hydrodynamics in Swirled Flows”), Kazan, 19–22 Oct., 2015, St. Petersburg: Svoe Izdatel’stvo, 2015, p. 164–165.
Krasheninnikov, S.V. and Savchenko, O.V., Simulation of Swirling Mixing in the ANSYS CFX Program, Vestnik SGAU, 2013, no. 3-2 (41), pp. 128–132.
Tret’yakov, V.V., Sviridenkov, A.A., and Toktaliev, P.D., Fuel Atomization and Mixing in Unsteady Swirling Flows Behind the Gas-Dynamic Stabilizer, Izv. Vuz. Av. Tekhnika, 2017, vol. 60, no. 3, pp. 106–112 [Russian Aeronautics (Engl. Transl.), vol. 60, no. 3, pp. 434–441].
Tret’yakov, V.V., Sviridenkov, A.A., and Toktaliev, P.D., Simulation of Flow and Mixture Formation Nonstationarity in Combustion Chambers, Izv. Vuz. Av. Tekhnika, 2013, vol. 56, no. 1, pp. 33–37 [Russian Aeronautics (Engl. Transl.), vol. 56, no. 1, pp. 44–49].
Arbuzov, M.A. and Zharkovskii, A.A., Mekhanika zhidkosti i gaza. Raschet vyazkogo techeniya v tipovykh elementakh gidromashin (Mechanics of Fluid and Gas. Calculation of Viscosity Flow in Typical Elements of Hydraulic Machines), St. Petersburg: Izd. Politekhn. Univ., 2016.
Kutsenko, Yu.G., Chislennye metody otsenki emissionnykh kharakteristik kamer sgoraniya gazoturbinnykh dvigatelei (Numerical Methods for Estimation of the Emission Characteristics of GTE Combustion Chambers), Ekaterinburg; Perm’: UrO RAN, 2006.
Sabirzyanov, A.N., Yavkin, V.B., Aleksandrov, Yu.B., Markushin, A.N., and Baklanov, A.V., Gas-Turbine Engine Combustor Emission Simulation, Vestnik KGTU im A.N.Tupoleva, 2014, no. 2, pp. 62–70.
Mingazov, B.G. and Yavkin, V.B., Process Modeling in the GTE Combustors, Izv. Vuz. Av. Tekhnika, 1995, vol. 38, no. 1, pp. 47–50 [Russian Aeronautics (Engl. Transl.), vol. 38, no. 1, pp. 43–46].
Chenoweth, J.D., Kannepalli, Ch., Arunajatesan, S., and Hosangadi, A., Modeling Swirling Jet Flows Using a Hybrid RANS/LES Methodology, Proc. 44th AIAA/ASME/SAE/ASEE Joint Propulsion Conference, Hartford, CT, July 21-23, 2008, vol. 4, pp. 2445–2479.
Chaouat, B., The State of the Art of Hybrid RANS/LES Modeling for the Simulation of Turbulent Flows, Flow, Turbulence and Combustion, 2017, vol. 99 (2), p. 279–327.
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated from Izvestiya Vysshikh Uchebnykh Zavedenii, Aviatsionnaya Tekhnika, 2020, No. 4, pp. 101 - 107.
About this article
Cite this article
Nguen, T.D., Aleksandrov, Y.B., Sulaiman, A.I. et al. Experimental and Numerical Investigation of the Mixing Ratio for Various Vane Swirlers of the Combustion Chamber of a Gas Turbine Engine. Russ. Aeronaut. 63, 669–676 (2020). https://doi.org/10.3103/S1068799820040145
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068799820040145