Abstract
An approach to the analysis of electric arc process stability in plasma systems of ignition is considered depending on the ignition system power circuit parameters, speed of plasma-generating air, and combustion chamber inlet pressure. Also solved is the problem on determination of the calculated value of the maximum admissible speed of plasma-generating air that corresponds to the critical regime of stable arcing in plasma spark plug at the GTE start.
Similar content being viewed by others
References
Bul’, B.K., Osnovy teorii elektricheskikh apparatov (Fundamentals of the Electric Apparatus Theory), Butkevich, G.V., Ed., Moscow: Vysshaya Shkola, 1970.
Onishchik, I.I. and Khristoforov, I.L., Organizatsiya rabochego protsessa i vybor parametrov kamer sgoraniya TRD (Implementation of Working Process and Choice of Turbojet Engine Combustion Chamber Parameters), Moscow: MEI, 1982.
Yas’ko, O.I., Elektricheskaya duga v plazmotrone (Electric Arc in Plasmatrons), Kiselevskii, L.I., Ed., Minsk: Nauka i Tekhnika, 1977.
Raizer, Yu.P., Fizika gazovogo razryada (Physics of Gas Discharges), Moscow: Nauka, 1992.
Author information
Authors and Affiliations
Additional information
Original Russian Text © F.A. Gizatullin, R.M. Salikhov, 2011, published in Izvestiya VUZ. Aviatsionnaya Tekhnika, 2011, No. 3, pp. 60–62.
About this article
Cite this article
Gizatullin, F.A., Salikhov, R.M. On the analysis of electric arc process stability in plasma systems of ignition with allowance for GTE combustion chamber parameters. Russ. Aeronaut. 54, 318–321 (2011). https://doi.org/10.3103/S1068799811030147
Received:
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068799811030147