Abstract
Scab formation in hot rolling is investigated. A prototype apparatus for scab removal by metal brushes is developed; the corresponding operating conditions are determined. A system is manufactured for the removal of small scabs from rolled strip in a continuous etching line. Conditions are selected for brushing the strip after etching. The optimal strip velocity and speed of brush rotation are determined.
REFERENCES
Salganik, V.M., Chikishev, D.N., Pustovoitov, D.O., et al., Development of technology of thick plate hot rolling with achievement of a set of specified properties of finished products, Model. Razvit. Protsessov Obrab. Met. Davleniem, 2013, no. 13, pp. 76–82.
Pravosudovich, V.V., Sokurenko, V.P., Danchenko, V.N., et al., Defekty stal’nykh slitkov i prokata: Spravochnik (Defects of Steel Ingots and Rolled Products: Handbook), Moscow: Intermet Inzhiniring, 2006.
Buryakovskii, G.A. and Mininzon, R.D., Poverkhnostnye defekty legirovannykh stalei (Surface Defects of Alloy Steels), Moscow: Metallurgiya, 1987.
Stroganov, A.I., Khasin, G.A., Chernenko, A.N., and Drobyshevskii, A.S., Kachestvo poverkhnosti metalla (Metal Surface Quality), Moscow: Metallurgiya, 1985.
Kazakov, A.A., Kovalev, P.V., Andreeva, S.D., et al., The nature of defects in hot-rolled plate from pipe grades of steels. Part 2. Defects formed at the rolling production stage, Chern. Met., 2008, no. 12, pp. 10–14.
Gladshtein, L.I., Rivanenok, T.N., and Rudchenko, A.V., Role of non-metallic inclusions in deformation and fracture of steel with different grain size, Stal’, 1983, no. 6, pp. 63–68.
Gulyaev, A.P., Fonshtein, N.M., Matrosov, Yu.I., and Zhukova, E.N., Effect of sulfur on fracture parameters of low-alloy steel after controlled rolling, Izv. Akad. Nauk SSSR. Met., 1978, pp. 181–189.
Serebritskii, P.P., Obrabotka detalei mekhanicheskimi shchetkami (Machining Parts with Mechanical Brushes), Leningrad: Lenizdat, 1967.
Zotov, A.V., Methodology for calculating geometric and force parameters of the contact zone when cladding products with flexible tools, Vektor Nauki Tol’yattinsk. Gos. Univ., 2012, no. 3, pp. 85–88.
Platov, S.I., Dema, R.R., and Zotov, A.V., Formation model of clad layer thickness on parts of friction pairs of technological equipment, Vestn. Magnitogorsk. Gos. Tekh. Univ. im. G.I. Nosova, 2013, no. 1 (41), pp. 69–72.
Funding
Financial support was provided by the Russian Ministry of Science and Higher Education (project FZRU-2023-0008).
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
The authors of this work declare that they have no conflicts of interest.
Additional information
Translated by B. Gilbert
Publisher’s Note.
Allerton Press remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
About this article
Cite this article
Dema, R.R., Amirov, R.N., Latypov, O.R. et al. Scab Removal from Hot-Rolled Steel by Metallic Brushes. Russ. Engin. Res. 44, 368–375 (2024). https://doi.org/10.3103/S1068798X24700369
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068798X24700369