Abstract
A low-alloy steel with specific properties is developed for the manufacture of automobile starter shafts by a low-waste automated technology: rotary compression. When using this steel, the production time is shortened, and metal consumption is decreased.
REFERENCES
Zhadan, V.T. and Manevich, V.A., Sovershenstvovanie tekhnologii prokatki naosnove kompleksnykh kriteriev kachestva (Improvement of Rolling Technology on the Basis of Complex Quality Criteria), Moscow: Metallurgiya, 1989.
Potapov, I.N. and Polukhin, P.I., Novaya tekhnologiya vintovoi prokatki (New Technology of Screw Rolling), Moscow: Metallurgiya, 1975.
Trusov, V.A., Zhadan, V.T., and Orotovskaya, I.E., Theory and technology of plastic deformation, in Nauchnye trudy MISiS (Scientific Works of MISiS), Moscow: MISiS, 1994.
Tulupov, O.N., Strukturno-matrichnye modeli dlya povysheniya effektivnosti protsessov sortovoi prokatki (Structural Matrix Models for Improving the Efficiency of Long-Range Rolling Processes), Magnitogorsk: Metallurgiya, 2002.
Aliev, A.A., Development of steel for waste-free shaft manufacturing technology for automotive starters, Stal’, 2005, no. 2, pp. 79–80.
Funding
This work was supported by ongoing institutional funding. No additional grants to carry out or direct this particular research were obtained.
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
The authors of this work declare that they have no conflicts of interest.
Additional information
Translated by B. Gilbert
Publisher’s Note.
Allerton Press remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
About this article
Cite this article
Aliev, A.A., Filippov, G.A. Development of Steel for Automated Processing. Russ. Engin. Res. 44, 352–355 (2024). https://doi.org/10.3103/S1068798X24700333
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068798X24700333