Abstract
The production of slotted polymer pipes with adjustable filtration is considered. Options for the production of slots by deformational cutting in turning and milling are outlined. The equipment and the cutting kinematics are described. Regulation of the width and length of the filtration slots is discussed. The number of rows of filtration slots required is calculated, along with their inclination.
REFERENCES
Sutherland, K., Filters and Filtration Handbook, Oxford: Elsevier Sci., 2011.
Zubkov, A.I. and Ovchinnikov, A.I., EP Patent 0727269 B1, 2000.
Deforming Cutting Technology. http://defrez.ru. Accessed April 5, 2023.
Zubkov, A.I., Expanded titanium meshes based on deformational cutting, Obrab. Met. (Tekhnol., Oborud., Instrum.), 2020, vol. 22, no. 1, pp. 41–53. https://doi.org/10.17212/1994-6309-2020-22.1-41-53
Zubkov, N.N. and Sleptsov, A.D., Machining of microgrids and permeable slotted tubes, Izv. Vyssh. Uchebn. Zaved., Mashinostr., 2007, no. 3, pp. 56–60.
Zubkov, N.N. and Sleptsov, A.D., Production of slotted polymer filter tubes by deformational cutting, Russ. Eng. Res., 2010, vol. 30, no. 12, pp. 1231–1233. https://doi.org/10.3103/S1068798X10120117
Sleptsov, A.D., Development and study of a method for obtaining slot filter structures, Cand. Sci. (Eng.) Dissertation, Moscow: Bauman Moscow State Tech. Univ., 2011.
Zubkov, N.N. and Vasil’ev, V.A., Filtering elements of a new design and equipment for their manufacture, Metallurgist, 2016, vol. 60, nos. 5–6, pp. 547–554. https://doi.org/10.1007/s11015-016-0329-0
Zubkov, N.N. and Sleptsov, A.D., Influence of deformational cutting data on parameters of polymer slotted screen pipes, J. Manuf. Sci. Eng., 2016, vol. 138, no. 1, p. 011007. https://doi.org/10.1115/1.4030827
Karpenko, A.P., Mukhlisullina, D.T., and Tsvetkov, A.A., Multi-objective optimization of water slotted filter geometry, Nauka Obraz.: Nauch. Izd. Mosk. Gos. Tekh. Univ. im. N.E. Baumana, 2013, no. 2, pp. 221–240. https://doi.org/10.7463/0213.0539055
Ivanov, D.V., Simulation of forming process of discrete-slot structure in case of bi-rotatory edge cutting machining, Nauka Obraz.: Nauch. Izd. Mosk. Gos. Tekh. Univ. im. N.E. Baumana, 2013, no. 7, pp. 345–368. https://doi.org/10.7463/0713.0576656
Soliman, E., Simulation of the polygonal turning process, J. Manuf. Process., 2022, vol. 80, pp. 852–859. https://doi.org/10.1016/j.jmapro.2022.06.028
Tuan, D.A., A study of polygonal turning using attachment, Vietnam Sci. Technol. Mag., 2018, vol. 139, no. 9, pp. 53–56.
Razumov, M., Grechukhin, A., and Pykhtin, A., Determination of shape errors during polygonal turning of polyhedrons with an odd number of faces, Procedia Eng., 2016, vol. 150, pp. 844–848. https://doi.org/10.1016/j.proeng.2016.07.130
Funding
This work was supported by ongoing institutional funding. No additional grants to carry out or direct this particular research were obtained.
Author information
Authors and Affiliations
Corresponding authors
Ethics declarations
The authors of this work declare that they have no conflicts of interest.
Additional information
Translated by B. Gilbert
Publisher’s Note.
Allerton Press remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
About this article
Cite this article
Zubkov, N.N., Sleptsov, A.D. & Khramenkov, M.D. Production of Adjustable Slotted Polymer Filter Pipes by Deformational Cutting. Russ. Engin. Res. 44, 216–222 (2024). https://doi.org/10.3103/S1068798X24020291
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068798X24020291