Abstract
This study investigates the formation of conical threads on oilfield pipes using the plastic deformation method. We developed a tool and method for rolling conical threads, which significantly enhance the operational performance of oilfield pipes.
REFERENCES
Kirichek, A.V. and Afonin, A.N., Rolling of threads an oil assortment, Uprochnyayushchie Tekhnol. Pokrytiya, 2009, no. 7, pp. 7–11.
Kuts, V.V. and Zubkov, D.A., Analysis of the motion patterns of the knurled roller when the inner lock conical thread is rolled, Sovr. Mater., Tekh. Tekhnol., 2022, no. 1 (40), pp. 17–19.
Rasulov, N.M., Damirova, G.V., Abbasova, I.A., and Huseynov, Y.E., Improving the efficiency of thread rolling with management of technological connections, SOCAR Proc., 2022, no. S1, pp. 11–15.
Kirichek, A.V. and Afonin, A.N., Rez’bonakatyvanie: Biblioteka tekhnologa (Thread Rolling: Technologist’s Library), Moscow: Mashinostroenie, 2009.
Afonin, A.N. and Kirichek, A.V., Deformation patterns during thread rolling, Izv. Orlovsk. Gos. Tekh. Univ. Ser. Fundam. Prikl. Probl. Tekh. Tekhnol., 2009, no. 6‑278 (577), pp. 39–42.
Stepanov, Yu.S., Kirichek, A.V., Afanas’ev, B.I., Afonin, A.N., and Dolzhikov, D.A., RF Patent 2371273, Byull. Izobret., 2009, no. 8.
Rasulov, N.M., Improving the efficiency of machining parts with complex surfaces of rotation, Extended Abstract of Doctoral (Eng.) Dissertation, Baku, 2000.
Rasulov, N.M., Nadirov, U.M., and Alekberov, M.Z., Generalized assessment of machined surfaces quality, Russ. Eng. Res., 2020, vol. 40, no. 10, pp. 822–825. https://doi.org/10.3103/S1068798X20100202
Agaev, N.M., Rasulov, N.M., and Guseinov, M.A., USSR Inventor’s Certificate no. 912363, Byull. Izobret., 1982, no. 10.
Agaev, N.M., Rasulov, N.M., and Guseinov, M.A., Modernization of thread rolling head for rolling tapered threads, Stanki Instrum,, 1984, no. 9, pp. 28–29.
Funding
This work was supported by ongoing institutional funding. No additional grants to carry out or direct this particular research were obtained.
Author information
Authors and Affiliations
Corresponding authors
Ethics declarations
The authors of this work declare that they have no conflicts of interest.
Additional information
Translated by V. Tereshchenko
Publisher’s Note.
Allerton Press remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
About this article
Cite this article
Rasulov, N.M., Nadirov, U.M. Ensuring the Quality of Taper Pipe Threads Rolled in Pipes with the Control of Kinematic Technological Connections. Russ. Engin. Res. 44, 20–22 (2024). https://doi.org/10.3103/S1068798X24010337
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068798X24010337